请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
OBD450-18GM60A-E5-V1
General specifications |
Detection range | 0 ... 450 mm |
Detection range min. | 0 ... 30 mm |
Detection range max. | 0 ... 450 mm |
Adjustment range | 30 ... 450 mm |
Reference target | standard white 200 mm X 200 mm |
Light source | LED |
Light type | modulated visible red light |
Diameter of the light spot | approx. 30 mm at 450 mm |
Opening angle | approx. 2.6 ° |
Optical face | lateral |
Ambient light limit | EN 60947-5-2 20000 Lux |
Hysteresis | < 15 % |
Functional safety related parameters |
MTTFd | 854 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green: on - power on flashing (4 Hz) - short circuit |
Function indicator | LED yellow: constantly on - object detected constantly off - object not detected |
Control elements | sensitivity adjustment |
Control elements | light/dark on electrically switchable |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
No-load supply current | < 25 mA |
Protection class | III |
Output |
Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP output / light-on L/D-On - Pin2: Low-active input |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA , resistive load |
Voltage drop | ≤ 2 V DC |
Switching frequency | 500 Hz |
Response time | ≤ 1 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
Ambient conditions |
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | brass, nickel-plated |
| Optical face | PMMA |
| Connector | plastic |
Mass | approx. 24 g |
Dimensions | |
| Length | 78.5 mm |
| Diameter | 18 mm |
| Thread size | M18 |
Classifications
System | Classcode |
ECLASS 13.0 | 27270903 |
ECLASS 12.0 | 27270903 |
ECLASS 11.0 | 27270903 |
ECLASS 10.0.1 | 27270903 |
ECLASS 9.0 | 27270903 |
ECLASS 8.0 | 27270903 |
ECLASS 5.1 | 27270903 |
ETIM 9.0 | EC001821 |
ETIM 8.0 | EC001821 |
ETIM 7.0 | EC001821 |
ETIM 6.0 | EC001821 |
ETIM 5.0 | EC001821 |
UNSPSC 12.1 | 39121528 |
Details:
OBD450-18GM60A-E5-V1
Design / Simulation:
OBD450-18GM60A-E5-V1
Approvals:
OBD450-18GM60A-E5-V1
相關產品:
OBD450-18GM60A-E5-V1
Accessories |
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
Plastic mounting adapter, 18 mmfa |
|
|
|
|
Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
Mounting Bracket with swivel nutfa |
|