General specifications |
UL File Number | E223772 |
Indicators/operating means |
LED indication | see manual |
Rotary switch | Setting the fieldbus protocol |
Electrical specifications |
Rated operating voltage | 18 ... 30 V |
Nominal voltage | 24 V DC |
Current consumption | 120 mA |
Current loading capacity | Max. 2 x 16 A per module (Loop-through current via L-coded power supply) Total current: max. 9 A per module |
Galvanic isolation | between US and UL |
Interface 1 |
Interface type | Industrial Ethernet |
Physical | M12, D-coded |
Protocol | PROFINET IO with media redundancy protocol (MRP) EtherNet/IP with Device Level Ring (DLR) EtherCAT® |
Transfer rate | 10/100 Mbps |
Inputs/Outputs |
Number/Type | 8 digital inputs (X1 – X4), 8 digital outputs (X5 – X8) Inputs: 2-, 3-, 4-wire PNP, DC, supply from US Outputs: 2-, 3-, 4-wire, PNP, DC, supply from UL Short-circuit protected |
Sensor supply | max. 200 mA per port (X1 – X4) via US |
Output current | max. 2 A per channel / 4 A per port (X5 – X8) via UL |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011 |
Standard conformity |
Degree of protection | EN 60529:2000 |
Emitted interference | EN 61000-6-4:2007+A1:2011 |
Noise immunity | EN 61000-6-2:2005 |
Shock resistance | EN 61131-2:2004 |
Ambient conditions |
Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Cold start temperature | -40 °C (-40 °F) |
Relative humidity | max. 95 % |
Altitude | 0 ... 2000 m |
Shock and impact resistance | 50 g, 11 ms, all axes |
Vibration resistance | 15 g at 5 - 500 Hz |
Pollution degree | 3 |
Mechanical specifications |
Contact elements | PA |
Degree of protection | IP65 / IP67 / IP69K |
Connection | Power Supply M12, L-coded Fieldbus M12, D-coded Inputs/Outputs M12, A-coded |
Material | |
| Contacts | CuSn, gold-plated CuNi, gold-plated |
| Housing | Diecast zinc |
| Seal | FKM |
Mass | 500 g |
Tightening torque, fastening screws | 1 Nm |
Tightening torque, cable gland | 0.6 Nm |
Dimensions | |
| Height | 200 mm |
| Width | 59.6 mm |
| Length | 21 mm |
Construction type | Field housing |
Tightening torque of clamping screws | 0.5 Nm |