请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
IQC21-10 10pcs
General specifications |
Operating frequency | 13.56 MHz |
Transfer rate | 26 kBit/s |
Memory |
Chip Type | I-CODE SLIX (NXP) |
EEPROM | 896 Bit |
UID | 64 Bit |
Memory organization | 4 bytes/block |
Read cycles | unlimited |
Write cycles | 100000 |
Data retention period | 50 years |
Directive conformity |
Radio equipment | |
| Directive 2014/53/EU | EN 300330 |
RoHS | |
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
Standard conformity |
Degree of protection | EN 60529 |
RFID | ISO/IEC 15693-1 ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Material | |
| Housing | PBT |
| Encapsulation compound | CY 221/HY 2966 |
Installation | |
| In metal | yes |
| On metal | yes |
| In air | yes |
Dimensions | |
| Height | 4.4 mm |
| Height tolerance | ± 0.1 mm |
| Diameter | 9.9 mm |
| Diameter tolerance | ± 0.1 mm |
Construction type | Cylindrical |
Note | Packaging unit, 10-piece |
Classifications
System | Classcode |
ECLASS 13.0 | 27280402 |
ECLASS 12.0 | 27280402 |
ECLASS 11.0 | 27280402 |
ECLASS 10.0.1 | 27280402 |
ECLASS 9.0 | 27280402 |
ECLASS 8.0 | 27280401 |
ECLASS 5.1 | 27280401 |
ETIM 9.0 | EC002996 |
ETIM 8.0 | EC002996 |
ETIM 7.0 | EC002996 |
ETIM 6.0 | EC002996 |
ETIM 5.0 | EC002996 |
UNSPSC 12.1 | 43211710 |
Details:
IQC21-10 10pcs
Approvals:
IQC21-10 10pcs
相關產品:
IQC21-10 10pcs
Accessory of |
|
|
|
HF RFID read/write device, ISO 15693, for IDENTControlfa |
|
|
|
|
HF RFID read/write device, ISO 15693, for IDENTControlfa |
|
|
|
|
HF RFID read/write device, ISO 15693fa |
|
|
|
|
HF RFID read/write device, ISO 15693fa |
|
|
|
|
HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa |
|
|
|
|
HF RFID read/write device with IO-Link in accordance with ISO 15693fa |
|
|
|
|
HF RFID read/write device with IO-Link in accordance with ISO 15693fa |
|