请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
IQT1-F61-R4-V1
產品描述 |
HF RFID read/write device, ISO 15693 |
General specifications |
Operating frequency | 13.56 MHz |
Transfer rate | 26 kBit/s |
Sensing range | |
| Read distance | 0 ... 55 mm |
| Write distance | 0 ... 55 mm |
| Width | max. 45 mm |
UL File Number | E87056 |
MTBF | 385 a (Operation at +40 °C) |
Electrical specifications |
Rated operating voltage | 10 ... 30 V DC , ripple 10 %SS , limited power source (EN 60950) |
Power consumption | ≤ 1.3 W |
Interface |
Physical | RS-485 point-to-point connection |
Protocol | ASCII |
Transfer rate | 1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s |
Cable length | ≤ 3 m |
Directive conformity |
Radio equipment | |
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
RoHS | |
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
Standard conformity |
Degree of protection | EN 60529 |
RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
Approvals and certificates |
FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
Radio approval | USA: FCC IREIQH1-F61-V1 Canada: 7037A-IQH1F61V1 |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | connector M12 x 1 |
Material | |
| Housing | ABS |
| Encapsulation compound | WEVO 403FL/300 |
Installation | |
| Distance between two heads | ≥ 150 mm
|
Mass | approx. 60 g |
Dimensions | |
| Height | 12 mm |
| Width | 28 mm |
| Length | 80 mm |
Cable length | 20 cm |
Classifications
System | Classcode |
ECLASS 13.0 | 27280401 |
ECLASS 12.0 | 27280401 |
ECLASS 11.0 | 27280401 |
ECLASS 10.0.1 | 27280401 |
ECLASS 9.0 | 27280401 |
ECLASS 8.0 | 27280401 |
ECLASS 5.1 | 27280401 |
ETIM 9.0 | EC002998 |
ETIM 8.0 | EC002998 |
ETIM 7.0 | EC002998 |
ETIM 6.0 | EC002998 |
ETIM 5.0 | EC002998 |
UNSPSC 12.1 | 43211710 |
Details:
IQT1-F61-R4-V1
Product Documentation:
IQT1-F61-R4-V1
Design / Simulation:
IQT1-F61-R4-V1
Approvals:
IQT1-F61-R4-V1
相關產品:
IQT1-F61-R4-V1
Accessories |
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|
|
|
|
Data carrierfa |
|