请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
OBE2000-R2-SE2-0,2M-V31-P
產品描述 |
Thru-beam sensor for standard applications, miniature design, 2000 mm detection range, red light, dark on, PNP output, 200 mm fixed cable with plug M8, 4-pin |
System components |
Emitter | OBE2000-R2-S-0,2M-V31-P |
Receiver | OBE2000-R2-E2-0,2M-V31-P |
General specifications |
Effective detection range | Long range mode: 0 ... 2 m High precision mode: 0 ... 200 mm |
Threshold detection range | Long range mode: 2.5 m High precision mode: 300 mm |
Light source | LED |
Light type | modulated visible red light , 630 nm |
Angle deviation | approx. 2 ° |
Diameter of the light spot | Long range mode: 150 mm at a distance of 2000 mm High precision mode: 0.5 mm at a distance of 50 mm |
Opening angle | approx. 2 ° |
Optical face | frontal |
Ambient light limit | EN 60947-5-2 : 30000 Lux |
Functional safety related parameters |
MTTFd | 806 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted |
Electrical specifications |
Operating voltage | 10 ... 30 V DC , class 2 |
No-load supply current | Emitter: ≤ 11 mA Receiver: ≤ 8 mA |
Input |
Control input | Emitter selection BK: not connected, Long Range mode BK: 0 V, High Precision Mode |
Switching threshold | Teach-In input |
Output |
Switching type | NO contact / dark on |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 50 mA |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | approx. 800 Hz |
Response time | 600 µs |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
UL approval | cULus Recognized, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 200 mm fixed cable with 4-pin, M8x1 connector |
Material | |
| Housing | PC/ABS and TPU |
| Optical face | PC |
| Cable | PUR |
Installation | Fixing screws , 2 x M2 allen head screws included with delivery |
Mass | approx. 20 g per sensor |
Dimensions | |
| Height | 24 mm |
| Width | 7.5 mm |
| Depth | 11.2 mm |
Cable length | 200 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270901 |
ECLASS 12.0 | 27270901 |
ECLASS 11.0 | 27270901 |
ECLASS 10.0.1 | 27270901 |
ECLASS 9.0 | 27270901 |
ECLASS 8.0 | 27270901 |
ECLASS 5.1 | 27270901 |
ETIM 9.0 | EC002716 |
ETIM 8.0 | EC002716 |
ETIM 7.0 | EC002716 |
ETIM 6.0 | EC002716 |
ETIM 5.0 | EC002716 |
UNSPSC 12.1 | 39121528 |
Details:
OBE2000-R2-SE2-0,2M-V31-P
Design / Simulation:
OBE2000-R2-SE2-0,2M-V31-P
Approvals:
OBE2000-R2-SE2-0,2M-V31-P
相關產品:
OBE2000-R2-SE2-0,2M-V31-P
Accessories |
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Mounting aid for R2 series, Mounting bracketfa |
|
|
|
|
Female cordset single-ended M8 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M8 angled A-coded, 4-pin, PUR cable greyfa |
|