Ultrasonic sensor UC500-30GM70-2E2R2-V15-Y
- 2 switch outputs
- Synchronization options
- Temperature compensation
- Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
- Customer-specific configuration
Contact Us
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of UC500-30GM70-2E2R2-V15-Y
| Product Description |
|---|
| Ultrasonic direct detection sensor |
| General specifications | ||
|---|---|---|
| Sensing range | 45 ... 500 mm | |
| Adjustment range | 50 ... 500 mm | |
| Dead band | 0 ... 45 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 300 kHz | |
| Response delay | ≤ 60 ms | |
| Nominal ratings | ||
| Temperature drift | ≤ ± 1.5 % of full-scale value | |
| Time delay before availability | ≤ 85 ms | |
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | solid Switching state switch output 1 | |
| LED green/yellow | yellow: switching state switch output 2 green: Teach-In |
|
| Potentiometer | Switching output 1 and Switching output 2 adjustable | |
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 12 ... 30 V DC (including ripple) | |
| Ripple | ≤ 10 % | |
| No-load supply current | ≤ 50 mA | |
| Interface | ||
| Interface type | Infrared | |
| Mode | point-to-point connection | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input | |
| 0 Level | ≤ 3 V | |
| 1 Level | ≥ 15 V | |
| Input impedance | typ. 900 Ω | |
| Number of sensors | max. 10 | |
| Switching output | ||
| Output type | 2 switch outputs PNP, NC ( NO contact programmable ) | |
| Default setting | 50 ... 500 mm ( adjustable via potentiometer ) | |
| Repeat accuracy | ± 0.5 mm | |
| Operating current | per 150 mA , short-circuit/overload protected | |
| Switching frequency | ≤ 5 Hz | |
| Switching hysteresis | 5 mm ( programmable ) | |
| Voltage drop | ≤ 3 V | |
| Off-state current | ≤ 10 µA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 5-pin | |
| Degree of protection | IP65 | |
| Material | ||
| Housing | brass, nickel-plated | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 140 g | |
| Dimensions | ||
| Length | 99.3 mm | |
| Diameter | 30 mm | |
| Construction type | Cylindrical | |
| Factory settings | ||
| Output 1 | Normally closed (NC) | |
| Output 2 | Normally closed (NC) | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UC500-30GM70-2E2R2-V15-Y
Informative Literature: UC500-30GM70-2E2R2-V15-Y
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Rugged Collision Protection for Cleaning Robots | ENG | 313 KB |
Product Documentation: UC500-30GM70-2E2R2-V15-Y
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 150 KB |
Approvals: UC500-30GM70-2E2R2-V15-Y
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-2140156-4 / UL-CA-2133660-4 | ALL | 284 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5209A | ALL | 81 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5568 | ALL | 64 KB | |
Software: UC500-30GM70-2E2R2-V15-Y
| Software Tools | Release Info | File Type | File Size |
|---|---|---|---|
| Service program ULTRA-PROG-IR / Serviceprogramm ULTRA-PROG-IR | V1.07.02 / 22-12-2022 | ZIP | 2115 KB |
Associated Products: UC500-30GM70-2E2R2-V15-Y
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
In stock
Contact Us
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
+1 330 425-3555
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.