Radar sensor RMS-D BROAD
- Microwave motion sensor with intelligent functions
- Reliable detection of people and vehicles
- Direction detection
- Cross traffic suppression
- "Slow motion" for extremely slow motions
- Simplest adjustement of the sensing range
- Version with extra-wide detection area
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques RMS-D BROAD
| Description produit |
|---|
| Premium radar motion sensor offering additional functions, dynamic version offering direction detection, wide detection range (2 m x 4 m), max. installation height: 4 m, black housing, relay contact output, cable connection |
| General specifications | ||
|---|---|---|
| Sensing range | 2000 x 4000 mm (DxW) at 2200 mm mounting height and 30° inclination angle | |
| Function principle | Microwave module | |
| Detection speed | min. 0.1 m/s | |
| Marking | CE | |
| Setting angle | 0 ... 40 ° in 5 ° increments | |
| Operating frequency | 24.15 ... 24.25 GHz K-Band | |
| Operating mode | Radar motion sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| MTTFd | 640 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red/green | |
| Control elements | DIP switch for selection of operating modes : direction detection , cross-traffic suppression , Slow-motion , Switching type | |
| Control elements | sensitivity adjustment | |
| Control elements | Adjustment for off delay | |
| Electrical specifications | ||
| Operating voltage | 12 ... 36 V DC , 12 ... 28 V AC | |
| No-load supply current | ≤ 50 mA at 24 V DC | |
| Power consumption | ≤ 1 W | |
| Output | ||
| Switching type | NO/NC | |
| Signal output | relay, 1 NO | |
| Switching voltage | max. 48 V AC / 48 V DC | |
| Switching current | max. 0.5 A AC / 1 A DC | |
| Switching power | max. 24 W / 60 VA | |
| De-energized delay | 0.2 ... 5 s adjustable (1 sec factory setting) | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| R&TTE Directive 1995/5/EC | This device can be used in all countries within the European Union. Use in North America is not permitted. In other countries, all applicable national regulations must be observed. | |
| Standard conformity | ||
| Standards | EN 62311, EN 60950-1, EN 301 489-1, EN 301 489-3, EN 300 440-2 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 90 % non-condensing | |
| Mechanical specifications | ||
| Mounting height | max. 4000 mm | |
| Degree of protection | IP54 | |
| Connection | plug-in screw terminals 4-pin , 5 m connecting cable included with delivery | |
| Material | ||
| Housing | ABS, anthracite | |
| Mass | 120 g | |
| Dimensions | 123 mm x 65 mm x 57 mm | |
| Height | 65 mm | |
| Width | 123 mm | |
| Depth | 57 mm | |
| Suitable series | ||
| Series | RMS | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: RMS-D BROAD
Informative Literature: RMS-D BROAD
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: RMS-D BROAD
| Brief Instructions | Langue | Type de fichier | Taille |
|---|---|---|---|
| Brief instructions | FRA | 729 KB | |
| Recommended settings for RMS-D, RMS-D-RC | ENG | 525 KB |
Design / Simulation: RMS-D BROAD
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 3730 KB |
Produits associés : RMS-D BROAD
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.