Surge Protector FS-LBAS-IA1
- For Ethernet-APL spur ports
- Intrinsically safe according to 2-WISE
- Stainless steel housing for field device mounting, ISO 20 mm thread
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques FS-LBAS-IA1
| Description produit |
|---|
| Surge protector, Ethernet-APL, field mounting, Ex ia, Ex d, Ex e, 20 mm ISO thread |
| General specifications | ||
|---|---|---|
| Design / Mounting | Outside installation | |
| Installation in hazardous area | Zone 1 | |
| Ethernet Interface | ||
| Interface type | Ethernet-APL auxiliary device | |
| Electrical specifications | ||
| Rated voltage | 30 V | |
| Rated current | 500 mA | |
| Impulse rating | 2 kV/1 kA (category C1) per line 5 kV/2,5 kA (category C2) per line 0,5 kA (category D1) per line |
|
| Impulse discharge current (10/350 µs) | 0.5 kA per line | |
| Nominal discharge current (8/20 µs) | ||
| per line | 2.5 kA | |
| total | 5 kA | |
| Max. surge current (8/20 µs) | 5 kA overstressed fault mode 1 acc. to IEC 61643-21 | |
| Voltage protection level | ||
| Line/Earth | max. 1800 V C1 , 1 kA per line max. 2100 V C2 , 2.5 kA per line max. 50 V C3 , 50 A per line max. 1400 V B2 , 50 A per line |
|
| Standard conformity | ||
| Degree of protection | IEC/EN 60529 | |
| Climatic conditions | IEC 60721 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Surge protection | IEC 61643-21 | |
| Ethernet | Ethernet-APL , IEEE 802.3 for 10BASE-T1L |
|
| Ambient conditions | ||
| Ambient temperature | -50 ... 80 °C (-58 ... 176 °F) | |
| Storage temperature | -50 ... 90 °C (-58 ... 194 °F) | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Connection type | wire ends APL + red , APL - black , protective conductor (PE) green/yellow |
|
| Core cross section | APL +, APL - 0.8 mm2 , PE 1.3 mm2 |
|
| Housing material | Stainless steel 1.4401/316 | |
| Degree of protection | IP67 | |
| Mass | 200 g | |
| Mounting | ISO 20 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | TÜV 22 ATEX 8786 X | |
| Marking | 2-WISE auxiliary device | |
| Marking |  ll 2 (1) G Ex ia [ia Ga] IIC T6 Gb , ll 2 (1) D Ex ia [ia Da] lIIC T80°C Db , l M2 (M1) Ex ia [ia Ma] l Mb , ll 2 G Ex db eb mb IIC T6 Gb , l M2 Ex eb mb I Mb , lI 2 (1) G Ex db [ia Ga] IIC T6 Gb |
|
| Voltage | 30 V | |
| Current | 500 mA | |
| Internal capacitance | negligible 0 nF | |
| Internal inductance | negligible 0 µH | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN 60079-18:2015 , EN 60079-1:2014 , IEC TS 60079-47:2021 |
|
| International approvals | ||
| IECEx approval | IECEx TUR 22.0017X | |
| Approved for | Ex ia [ia Ga] IIC T6 Gb , Ex ia [ia Da] lIIC T80°C Db , Ex ia [ia Ma] l Mb , Ex db eb mb IIC T6 Gb , Ex db eb mb I Mb , Ex db [ia Ga] IIC T6 Gb |
|
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27171202 |
| ECLASS 12.0 | 27171202 |
| ECLASS 11.0 | 27130805 |
| ECLASS 10.0.1 | 27130805 |
| ECLASS 9.0 | 27130805 |
| ECLASS 8.0 | 27130805 |
| ECLASS 5.1 | 27130801 |
| ETIM 9.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 6.0 | EC000941 |
| ETIM 5.0 | EC000941 |
| UNSPSC 12.1 | 39121610 |
Details: FS-LBAS-IA1
Product Documentation: FS-LBAS-IA1
| Safety and Security Documentation | Langue | Type de fichier | Taille |
|---|---|---|---|
| Manuel d'instructions | FRA | 169 KB | |
| Manuals | |||
| Manual | ENG | 1648 KB | |
Design / Simulation: FS-LBAS-IA1
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 102 KB |
Approvals: FS-LBAS-IA1
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| China SITIIAS CCC Ex Certificate | 2022322304004748 (Singapore) | ALL | 1107 KB | |
| Europe TUV Rheinland ATEX Certificate Surge Protective Device ATEX Category 2 (1) | TÜV 22 ATEX 8786 X | ALL | 1538 KB | |
| Worldwide TUV Rheinland Surge Protective Device IECEx Certificate of Conformity | IECEx TUR 22.0017X | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-5857_FRA | FRA | 174 KB | |
Ethernet-APL assure une communication continue à tous les niveaux hiérarchiques. En savoir plus sur cette technologie pionnière…
Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.