Your technical, product, or application questions answered in one business day* by our team of experts.
! Please fill in all fields before submitting your question. Pepperl+Fuchs values your privacy. Please read our privacy policy.
* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
IQT1-F61-IO-V1
Product Description
HF RFID read/write device with IO-Link in accordance with ISO 15693
General specifications
Operating frequency
13.56 MHz
Transfer rate
26 kBit/s
Sensing range
Read distance
0 ... 55 mm
Write distance
0 ... 55 mm
Width
max. 45 mm
MTBF
140 a (Operation at +40 °C)
Indicators/operating means
LED green
Illuminated: power on Flashing: IO-Link communication
LED yellow
Data carrier detected
LED red
Flashing: IO-Link communication interrupted
LED blue
Write/read attempt is being performed
Electrical specifications
Rated operating voltage
20 ... 30 V DC , ripple 10 %SS
No-load supply current
≤ 70 mA (at 24 V DC)
Power consumption
≤ 2 W
Interface
Interface type
IO-Link
IO-Link revision
1.1
Process data
Input 32 Byte Output 32 Byte
Vendor ID
1 (0x0001)
Device ID
4194561 (0x400101)
Data transfer rate
COM3 (230.4 kbits/s)
Min. cycle time
4 ms
SIO mode support
no
Compatible master port type
Class A Class B
Directive conformity
Radio equipment
Directive 2014/53/EU
EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364
RoHS
Directive 2011/65/EU (RoHS)
IEC/EN 63000
Standard conformity
Degree of protection
EN 60529
Communication interface
IEC 61131-9 / IO-Link V1.1.2
RFID
ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3
Approvals and certificates
UL approval
E87056 cULus Listed, Class 2 Power Source, Type 1 enclosure
FCC approval
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approval
This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Netlist price. Your individual price will be calculated during checkout.
In stock
Item 'PS1000-A6-24.5' added to cart!
100 V AC to 240 V AC wide-range input, Output 24 V DC, 5 A, 120 W, 1-phase, Housing width 32 mm, Efficiency up to 94.3 %, Minimal inrush current surge, DC OK relay contact, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC factory setting: 24.1 Vpa
Contact Us
In stock
Contact Us
+1 330 425-3555