Your technical, product, or application questions answered in one business day* by our team of experts.
! Please fill in all fields before submitting your question. Pepperl+Fuchs values your privacy. Please read our privacy policy.
* Pepperl+Fuchs makes every effort to provide an answer that is helpful and relevant to you. Your question is typically answered in one business day. Occasionally, an answer is delayed. In these cases, we are often researching your question, conferring with colleagues, or may route your question to another Pepperl+Fuchs location. You will be notified via e-mail regarding the status of your question.
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
VIM62PL-E0G10-0ME-I420V14
Product Description
Vibration sensor with analog current output and increased temperature resistance
General specifications
Type
Vibration sensor
Measuring technology
MEMS
Series
Performance Line
Measured variable
Vibration acceleration
Measuring range
Vibration acceleration
0 ... 10 g rms
Measurement accuracy
± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954
Cross-sensitivity
< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range
1 ... 1000 Hz
Averaging time
for a-rms: 12 s
Electrical specifications
Fusing
external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage
10 ... 30 V DC
Current consumption
max. 25 mA
Power consumption
max. 750 mW
Time delay before availability
10 s (rms filter is calculated intially with measurement data before they are available at the output)
Surge protection
up to 2 kV
Output 1
Output type
analog output, current output of the vibration variable
Output current
4 ... 20 mA
Load resistor
≤ 500 Ω
Standard conformity
Degree of protection
DIN EN 60529, IP66, IP67
Shock resistance
DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance
DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation
DIN ISO 10816/20816
Approvals and certificates
UL approval
Ordinary Location
E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
Maximum permissible ambient temperature
max. 60 °C (max. 140 °F)
Ambient conditions
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature
-40 ... 125 °C (-40 ... 257 °F) directly at the mounting point
Storage temperature
-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type
plug
Housing material
Stainless steel 1.4305 / AISI 303
Degree of protection
IP66 / IP67 only in connected state
Connector
Threading
M12
Number of pins
4
Mass
approx. 200 g
Dimensions
Length
82.35 mm
Diameter
31 mm
Classifications
System
Classcode
ECLASS 13.0
27271103
ECLASS 12.0
27201406
ECLASS 11.0
27201406
ECLASS 10.0.1
27201406
ECLASS 9.0
27201406
ECLASS 8.0
27201406
ECLASS 5.1
27201406
ETIM 9.0
EC004309
ETIM 8.0
EC004309
ETIM 7.0
EC002959
ETIM 6.0
EC002959
ETIM 5.0
EC001758
UNSPSC 12.1
41114624
Details:
VIM62PL-E0G10-0ME-I420V14
Function
The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.
The sensor’s design is impressively robust against tough environmental conditions.
The stainless steel housing provides optimal protection against corrosion. The wide temperature range of the sensor enables reliable measured values even in harsh conditions.
The simple mounting allows for commissioning in any application.