Vibration sensor VIM62PP-E1V16-0PE-I420V15

Extended temperature range
Screw-in thread for simple installation
Simple electrical commissioning
Rugged stainless steel housing
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Suitable for use in harzadous area up to Zone 1/21 with type of protection intrinsic safety

Datasheet
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of VIM62PP-E1V16-0PE-I420V15

Product Description
Vibration sensor with analog current output, increased temperature resistance, suitable up to Zone 1/21 with type of protection intrinsic safety

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Performance Plus Line
Measured variable		Vibration velocity
Measuring range
	Vibration velocity	0 ... 16 mm/s
Measurement accuracy		± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		10 ... 1000 Hz
Averaging time		for v-rms: 2 s
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		10 ... 30 V DC
Current consumption		max. 25 mA
Power consumption		max. 750 mW
Time delay before availability		10 s (rms filter is calculated intially with measurement data before they are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Approvals and certificates
IECEx approval
	Equipment protection level Gb	IECEx CSAE 22.0042X
	Equipment protection level Db	IECEx CSAE 22.0042X
ATEX approval
	Equipment protection level Gb	CSANe 21 ATEX 1074 X
	Equipment protection level Db	CSANe 21 ATEX 1074 X
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Maximum permissible ambient temperature	max. 60 °C (max. 140 °F)
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Measuring head temperature		-40 ... 125 °C (-40 ... 257 °F) directly at the mounting point
Storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Connection type		plug
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state
Connector
	Threading	M12
	Number of pins	5
Mass		approx. 200 g
Dimensions
	Length	82.35 mm
	Diameter	31 mm
General information
Use in the hazardous area		see instruction manuals Only use accessories specified by the manufacturer.

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM62PP-E1V16-0PE-I420V15

Function

The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The sensor’s design is impressively robust against tough environmental conditions.

The stainless steel housing provides optimal protection against corrosion. The wide temperature range of the sensor enables reliable measured values even in harsh conditions.

The simple mounting allows for commissioning in any application.

Informative Literature: VIM62PP-E1V16-0PE-I420V15

Literature	Language	File Type	File Size
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM62PP-E1V16-0PE-I420V15

Brief Instructions	Language	File Type	File Size
Instruction leaflet / Beipackzettel	ALL	PDF	252 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	219 KB
Manuals
Manual VIM6*-Vibration Sensors	ENG	PDF	2498 KB

Design / Simulation: VIM62PP-E1V16-0PE-I420V15

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	1973 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	121 KB

Approvals: VIM62PP-E1V16-0PE-I420V15

Certificates	Certificate No.	Language	File Type	File Size
Canada, USA UL Ordinary Location	E468231	ALL	PDF	610 KB
Europe CSA ATEX Category 2	CSANe 22 ATEX 1074 X	ALL	PDF	1221 KB
Worldwide IECEx Certificate of Conformity	IECEx CSAE 22.0042X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-6808	ALL	PDF	332 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6850	ALL	PDF	326 KB

Associated Products: VIM62PP-E1V16-0PE-I420V15

Accessories

	RSL6-CS-SC-M55P200 Protective rubber sleeve	Contact Us
	Protective rubber sleeve for VIM6* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	MONAD-M08-1,25-M10-1,5/36 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-1,2Z-BSPT/36 Mounting adapter	60.00 USD Netlist price. Your individual price will be calculated during checkout. In stock Item 'MONAD-M08-1,25-1,2Z-BSPT/36' added to cart!
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa

	EMCAD-M08-1,25-M08-1,25/36 Mounting adapter	60.00 USD Netlist price. Your individual price will be calculated during checkout. In stock Item 'EMCAD-M08-1,25-M08-1,25/36' added to cart!
	EMC adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa

	KFD2-STC4-Ex1 SMART Transmitter Power Supply	465.00 USD Contact Us Item 'KFD2-STC4-Ex1' added to cart!
	1-channel isolated barrier, 24 V DC supply (Power Rail), Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources, Output 0/4 mA ... 20 mA, Terminals with test points, Up to SIL 2 acc. to IEC/EN 61508, Housing width: 20 mm, Number of channels: 1-channel, HART communication, Test sockets, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 35 V DC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current sourcepa

	V15-W-N4-5M-PUR-N4S5 Cable connector, NAMUR	Contact Us
	Female cordset single-ended M12 gewinkelt A-coded, 5-pin, shield on pin 5, PUR cable 4-core blue, NAMUR, shielded, UL approved, drag chain suitable, oil resistantfa

	MONAD-M08-1,25-M06-1,0/36 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter	Contact Us
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

	MAGAD-M08-1,25-MAG/36 Magnetic adapter	Contact Us
	Magnetic adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.