Temperature Multi-Input RD0-TI-Ex8.PA.*

FieldConnex® Fieldbus

For 8 temperature or analog sensors
Installation in Zone 1/Div. 1, intrinsically safe
Sensors in Zone 0/Div. 1
Connection to fieldbus acc. to FISCO or Entity
For PROFIBUS PA
DCS integration via GSD and FDT/DTM
Monitors sensor condition
For T/C, RTD 2-, 3-, 4-wire, voltage and resistance
Cold junction compensation
Removable terminals

Datasheet
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of RD0-TI-Ex8.PA.*

Product Description
Temperature multi-input, electronic component for control cabinet installation

General specifications
Design / Mounting		Cabinet installation
Installation in hazardous area		Zone 1 / Div. 1
Fieldbus connection
Fieldbus type		PROFIBUS PA
Firmware update		via separate plug connection
FDE (Fault Disconnect Equipment)		6.7 mA
Polarity		not polarity sensitive
Rated voltage		9 ... 32 V
Rated current		max. 23 mA
PROFIBUS PA
	Profile	3.02
Indicators/operating means
LED PWR		green: on, bus voltage existent
LED COM ERR		red, continuous lightning: hardware error; red, flashing: no bus activities or bus fault; off: no error
LED CHANNEL ERROR		red: 2 Hz flashing: lead breakage, overrange; off: no error
Input
Number		8
Sensor types		see table 1
Grounding		grounding of thermoelements possible
Error detection		lead breakage, wiring error, hardware device error
Common mode voltage		Input to Input 600 V_peak
Transfer characteristics
Deviation
	Cold junction compensation	± 0.5 °C (32.9 °F)
	Resolution/accuracy	see table 2
	Influence of ambient temperature	see table 3
	Linearization	T/C input 0.1°C RTD input 0.03°C
Internal measurement cycle		for all sensor types max. 1 s
Galvanic isolation
Fieldbus/inputs		safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Galvanic isolation		EN 60079-11
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F) hazardous area -40 ... 85 °C (-40 ... 185 °F) safe area
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		≤ 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		5 g , 10 ... 150 Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		plug-in terminals , spring terminal and screw terminal
Core cross section
	Bus	up to 2.5 mm²
	Inputs	up to 2.5 mm²
Housing material		Polycarbonate
Degree of protection		IP20
Mass		360 g
Mounting		DIN rail mounting
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 03 ATEX 2237
	Marking	II 2 (1) G Ex ia [ia Ga] IIC T4 Gb , II (1) G [Ex ia Ga] IIC , II (1) D [Ex ia Da] IIIC , II 3 G Ex ic IIC T4 Gc
Bus		FISCO see EC-Type Examination Certificate
	Voltage U_i	24 V
Inputs		see EC-Type Examination Certificate
Certificate		PTB 03 ATEX 2238 X
	Marking	II 3 G Ex nA IIC T4 Gc
Galvanic isolation
	Bus	see Statement of Conformity
	Input	see EC-Type Examination Certificate
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval		CoC 3025732
CSA approval		CoC 3025732C
IECEx approval		IECEx PTB 05.0001 , IECEx PTB 05.0002X
	Approved for	Ex ia [ia Ga] IIC T4 Gb , [Ex ia Ga] IIC , [Ex ia Da] IIIC , Ex ic IIC T4 Gc , Ex nA IIC T4 Gc
Certificates and approvals
Marine approval		DNV A-14038
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242610
ECLASS 12.0	27242610
ECLASS 11.0	27242610
ECLASS 10.0.1	27242610
ECLASS 9.0	27242610
ECLASS 8.0	27242610
ECLASS 5.1	27242610
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: RD0-TI-Ex8.PA.*

Function

The Temperature Multi-Input (TM-I) for DIN rail installation connects up to 8 analog inputs to the DCS via fieldbus. It is installed in a typically pre-wired field enclosure close to the sensors in the hazardous area. The TM-I is certified intrinsically safe and as associated apparatus: inputs are intrinsically safe even when the fieldbus connection is not. Analog inputs can be resistance temperature sensors with 2, 3, and 4 wires, measuring sensors, thermocouples, or millivolt signals.

The TM-I communicates all data, configuration, and alarms via one fieldbus address to the DCS. DCS integration utilizes GSD and FDT/DTM technology. Inputs can be configured all at once or individually. Fieldbus powers the sensors and the temperature interface itself. Additional power or wiring is not required.

Cold junction compensation for thermocouples is integrated. The TM-I detects and reports lead breakage and short circuit conditions.

Informative Literature: RD0-TI-Ex8.PA.*

Literature	Language	File Type	File Size
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB
Application Report - Installation-Ready Solution Replaces LEPIU Systems	ENG	PDF	228 KB

Product Documentation: RD0-TI-Ex8.PA.*

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	235 KB
Manuals
Manual	ENG	PDF	4255 KB
Software Information
Release information Device Description (EDDL) for Siemens SIMATIC PDM	ENG	PDF	403 KB

Design / Simulation: RD0-TI-Ex8.PA.*

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	8801 KB

Approvals: RD0-TI-Ex8.PA.*

Certificates	Certificate No.	Language	File Type	File Size
Brasil TUV Rheinland Brazil	TÜV 13.1136	ALL	PDF	1200 KB
Brasil TUV Rheinland Brazil	TÜV 13.1134 X	ALL	PDF	1198 KB
Canada FM	CoC 3025732C	ALL	PDF	316 KB
China SITIIAS CCC Ex Certificate	2020322314002489 (Singapore)	ALL	PDF	2152 KB
DNV Marine	TAA0000272	ALL	PDF	100 KB
Europe PTB ATEX Category 2 (1)	PTB 03 ATEX 2237	ALL	PDF	884 KB
Europe PTB ATEX Category 3 G	PTB 03 ATEX 2238X	ALL	PDF	617 KB
India PESO (India) CCOE	A/P/HQ/KA/104/5828 (P489740)	ALL	PDF	79 KB
PTB IECEx Certificate of Conformity	IECEx PTB 05.0001	ALL	LINK	---
PTB IECEx Certificate of Conformity	IECEx PTB 05.0002X	ALL	LINK	---
South Africa MASC	MASC S/18-2698	ALL	PDF	608 KB
USA FM	CoC 3025732	ALL	PDF	316 KB
Control Drawings
Control drawing FM / Control drawing FM		ALL	PDF	249 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0148F	ALL	PDF	2042 KB

Software: RD0-TI-Ex8.PA.*

Device Description Files/Drivers	Release Info	File Type	File Size
GSD / GSD	Rev. 1.0	ZIP	6 KB
DTM Collection FieldConnex / DTM Collection FieldConnex	1.9.0.2268	ZIP	35363 KB
Device Description (EDDL) for Siemens SIMATIC PDM / Gerätebeschreibung (EDDL) für Siemens SIMATIC PDM	1.0.0.585	ZIP	473 KB

Associated Products: RD0-TI-Ex8.PA.*

Matching System Components

	F2D0-TI-Ex8.PA.* Temperature Multi-Input Device with Aluminum Housing	Contact Us
	FieldConnex® Fieldbus, For 8 temperature or analog sensors, Installation in Zone 1/Div. 1, intrinsically safe, Sensors in Zone 0/Div. 1, Connection to fieldbus acc. to FISCO or Entity, For PROFIBUS PA, IECEx approval, Dust protection, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	F.TI0.P12.08.P.0...*00 Temperature Multi-Input Junction Box, Polyester (GRP)	Contact Us
	8 channel universal temperature interface, Glass fiber reinforced polyester, impact resistant, IP66, Configurable cable entries for bus lines and field signal lines, International approvals, For PROFIBUS PA, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Zone 1/2 - intrinsically safe high-power trunk Zone 1 - intrinsically safe trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	ARS11-B2-IA08-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 8 intrinsically safe Ex ia spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IA08-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 8 intrinsically safe Ex ia spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IA16-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 16 intrinsically safe Ex ia spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IA16-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 16 intrinsically safe Ex ia spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IA24-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 24 intrinsically safe Ex ia spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IA24-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 24 intrinsically safe Ex ia spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, Installation in Zone 2, IECEx approval, International, Europepa

	ARS11-B2-IC08-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 8 intrinsically safe Ex ic spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

	ARS11-B2-IC08-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 8 intrinsically safe Ex ic spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

	ARS11-B2-IC16-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 16 intrinsically safe Ex ic spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

	ARS11-B2-IC16-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 16 intrinsically safe Ex ic spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

	ARS11-B2-IC24-1 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 24 intrinsically safe Ex ic spur ports and screw terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

	ARS11-B2-IC24-2 Ethernet-APL Rail Field Switch	Contact Us
	FieldConnex®, Ethernet-APL rail field switch with 24 intrinsically safe Ex ic spur ports and spring terminals with proxy support selectable for PROFIBUS PA field devices, Managed Ethernet-APL field switch for process industries, Powered spur ports intrinsically safe Ex ic according to 2-WISE and FISCO, PROFINET MRP, S2 redundancy and dynamic reconfiguration, 2 ports each for 1000BASE-T and SFP transceivers, Redundant power input 20 VDC ... 60 VDC, IECEx approval, Internationalpa

Accessories

	DTM FieldConnex FieldConnex® DTM Collection	Contact Us
	User interface for PROFIBUS components, Simple access to measurements, diagnostic and configuration data, Supports any FDT/DTM hostpa

	Microsoft .NET Connection Software	Contact Us
	Software for connecting people, information, systems, and devices, For applications developed using .NET, Required to run PACTwarepa

	PACTware 5.0 FDT Framework	Contact Us
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	PACTware 4.1 FDT Framework	Contact Us
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Ethernet-APL for Process Industries

Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …

RSS Info Service for PANOS Updates

Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.

FieldConnex®—Fieldbus Made Easy

From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …

Technologies

Fieldbus in the Safe or Any Hazardous Area

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.