Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Tuotekuvaus |
---|
PROFINET / EtherNet/IP gateway for 2 AS-Interface networks |
General specifications | ||
---|---|---|
AS-Interface specification | V3.0 | |
Earth fault detection | integrated | |
Diagnostics function | Extended function via diagnostics interface | |
UL File Number | E223772 | |
MTBF | at 40 °C 51.5 a | |
IP address | ||
Indicators/operating means | ||
LED indication | see manual | |
Button | see manual | |
Electrical specifications | ||
Rated operating voltage | from AS-Interface 18 ... 31.6 V from AUX 20 ... 30 V |
|
Rated operating current | ≤ 220 mA from AS-Interface segment 1 ≤ 60 mA from AS-Interface segment 2 ≤ 170 mA from AUX |
|
Protection class | III | |
Nominal voltage | from AS-Interface 30 V DC from AUX 24 V DC |
|
Interface 1 | ||
Interface type | Fieldbus | |
Physical | 2 x RJ-45 | |
Protocol | HTTP EtherNet/IP PROFINET IO |
|
Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection | |
IP address | via DHCP | |
Interface 2 | ||
Interface type | Service interface | |
Physical | 1 x RJ45 | |
Transfer rate | 100 MBit/s | |
IP address | 192.168.1.2 | |
Interface 3 | ||
Interface type | SD card slot | |
Connection | ||
Ethernet | RJ45 | |
AUX/AS-Interface | removable spring clamp terminals | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 | |
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Shock resistance | EN 61131-2:2004 | |
Ambient conditions | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Cold start temperature | -40 °C (-40 °F) | |
Relative humidity | ≤ 95 % non-condensing | |
Altitude | ≤ 5000 m above MSL | |
Mechanical specifications | ||
Degree of protection | IP20 (Manufacturer declaration) | |
Material | PA 66-FR | |
Mass | 185 g | |
Dimensions | ||
Height | 125 mm | |
Width | 38 mm | |
Length | 99 mm | |
Construction type | DIN-rail mounting |
System | Classcode |
---|---|
ECLASS 13.0 | 27242607 |
ECLASS 12.0 | 27242607 |
ECLASS 11.0 | 27242607 |
ECLASS 10.0.1 | 27242607 |
ECLASS 9.0 | 27242607 |
ECLASS 8.0 | 27242607 |
ECLASS 5.1 | 27242607 |
ETIM 9.0 | EC001603 |
ETIM 8.0 | EC001603 |
ETIM 7.0 | EC001603 |
ETIM 6.0 | EC001603 |
ETIM 5.0 | EC001603 |
UNSPSC 12.1 | 39121535 |
The VBG-EP1-KE5-DMD is a PROFINET / EtherNet/IP gateway for 2 AS-Interface networks according to AS-Interface specification 3.0. The gateway is used to connect AS-Interface systems to higher-level PROFINET controllers or to connect to an EtherNet/IP network. Thanks to its particularly slim housing design with IP20 protection, it is particularly suitable for use in control cabinets. The gateway is supplied either from the AS-Interface or the AUX cable.
All settings of the AS-Interface network are made via the RJ45 service interface and a standard web browser. For easy commissioning, the settings made can be stored on a micro SD card and transferred to other devices as required.
Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
EtherNet/IP: Changeover from ASi gateways type K20 to KE5 | ENG | 1803 KB | |
PROFINET: Changeover from ASi gateways type K20 to KE5 | ENG | 959 KB | |
Manuals | |||
Manual VBG-EP1-KE5-D*, Firmware version 2.3 | ENG | 16916 KB | |
Manual VBG-EP1-KE5-D*, Firmware version 2.8 | ENG | 19451 KB | |
Manual VBG-EP1-KE5-D*, Firmware version: 2.16 | ENG | 17712 KB | |
Manual VBG-EP1-KE5-D*, Firmware version: 2.20 | ENG | 19122 KB |
CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 22487 KB |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 10258 KB |
Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|---|
AS-International Association | 135901 | ALL | 202 KB | |
ODVA | 12286.01 | ALL | 134 KB | |
PNO | Z13340 | ALL | 84 KB | |
US CA UL AS-Interface | CoC E223772 RptRef E223772-20210323 | ALL | 407 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5846B | ALL | 115 KB |
Device Description Files/Drivers | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
EDS / EDS | 2024/10 | ZIP | 23 KB |
Standard GSDML for Gateway / Standard GSDML für Gateway | 2023/11 | ZIP | 55 KB |
Conversion utility for Studio 5000 programs. The K20 gateway tags are converted to KE5 gateway tags. / Inbetriebnahmedatei_a | 2024/9 | ZIP | 79053 KB |
OpenAPI Specification / OpenAPI-Spezifikation | LINK | --- | |
Quick Start Guides for KE5 Gateway: Setting Protocol & IP Address / Inbetriebnahmedatei_a | 2023/1 | ZIP | 2837 KB |
Studio 5000 V32 Example Project, Video, UDTs for Messaging, and Description Files for easy labeling of IO. Shows how to Read/Write parameters, Read CTT2 diagnostics, Set Ramp on G20 and special Add-On instruction to read diagnostics from a KE4 safety monitor. / Inbetriebnahmedatei_a | 2023/3 | ZIP | 17462 KB |
Firmware | |||
Firmware / Firmware | V2.20.0.1978 | ZIP | 2966 KB |