Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Adapter Set CAN/USB-Configuration-Kit

CAN/USB-Configuration-Kit
  • Plug & Play connection of CAN bus network components
  • Transmission rate CAN bus up to 1 MBit/s
  • Integrated, switchable bus terminal resistor
  • Degree of protection IP20
  • Galvanic isolation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  CAN/USB-Configuration-Kit

Tuotekuvaus
CAN/USB configuration kit containing CAN/USB converter, power supply and adapter/connection cables
Electrical specifications
Operating voltage5 V via USB
Operating current500 mA via USB
Galvanic isolation1000 V DC / 1 sec
500 V AC / 1 min
Interface
Interface typeHi-Speed USB 2.0
CAN 2.0 A/B
Data transfer rateCAN baud rate: 10 kbit/s ... 1 Mbit/s
System requirements
Hardware requirementsPC
Operating systemMicrosoft Windows 10 (32 and 64 Bit)

Classifications

SystemClasscode
ECLASS 13.027060390
ECLASS 12.027060390
ECLASS 11.027060390
ECLASS 10.0.127060390
ECLASS 9.027060390
ECLASS 8.027060390
ECLASS 5.127279201
ETIM 9.0EC000310
ETIM 8.0EC000310
ETIM 7.0EC000310
ETIM 6.0EC000310
ETIM 5.0EC002585
UNSPSC 12.131251501

Details: CAN/USB-Configuration-Kit

Function

The USB/CAN-Configuration-Kit enables communication of a CAN device with a Windows PC via USB connection. In addition to the CAN/USB converter, the kit also includes a power supply unit and all necessary components such as an adapter and connection cables.

For the operation of the CAN/USB-Converter you have to install the appropriate software components.

You can download the required software components and a brief instructions manual for installing the kit from the product page of this kit via www.pepperl-fuchs.com.

Product Documentation: CAN/USB-Configuration-Kit

Language Selection:
Brief InstructionsKieliTiedostotyyppiTiedoston koko
Brief instructionsENGPDF66 KB

Approvals: CAN/USB-Configuration-Kit

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-6858ALLPDF116 KB

Liitännäistuotteet: CAN/USB-Configuration-Kit

Accessory of

Radar sensor for distance and velocity measuring up to 25 m sensing range, with M12 connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: Connector plug, Threading: M12 x 1fa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: Connector plug, Threading: M12 x 1fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: fixed cable with plug, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa
Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with CANopenfa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: cablefa
Radar sensor for distance and velocity measuring up to 25 m measuring range, CAN bus with SAE J1939 protocol, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: J1939, Connection type: fixed cable with plug, Connection assembly: Deutsch connector DT04-6P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W6Pfa
Single head system, CANopen interface, E1-Type approval, High EMC resistance, Series: -L2M, Interface type: CAN, Communication protocol: CANopen, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, UN/ECE Regulation No. 10 (E1): Type-approval number: 10R-069608, Connection type: Connector plug, Housing: PA-GF35, Threading: M12fa
Inertial measurement unit for inclination, acceleration and rotation rate measurement in 3-axis each, Dynamic inclination measurement despite external acceleration, Adjustable ranges for compensation of external accelerations, disturbances, Adjustable thresholds for detection of measured value overruns, Measurement of inclination, acceleration and rotation rate in 3 axis each, CAN bus with SAE J1939 protocolfa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with AMP connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: fixed cable with plug, Connection assembly: AMP connector Superseal 282107-1
AMP contact Superseal 282109-1fa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with DEUTSCH connector, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: fixed cable with plug, Connection assembly: Deutsch connector DT04-6P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W6Pfa
Radar sensor for distance and velocity measuring up to 25 m sensing range, with 2m cable, CANopen interface, Sensing range up to 25 m, Degree of protection IP68 / IP69, Interface type: CANopen, Connection type: cablefa
Kit component
DeviceNet/CANOpen bus cable M12 socket straight to M12 socket straight A-coded, 5-pin, PUR cable violet, shielded, UL approved, drag chain suitable, salt water resistantfa
Adapter Sub-D straight 9-pin to M12 plug / M12 socket straight A-coded 4-pinfa
Adapter cable M12 plug straight A-coded 4-pin to DC socket straight 2-pin, PUR cable black, drag chain suitable, torsion resistantfa
24 V DC power supplyfa
Free Download: White Paper on TCP-Based Communication Protocols (PDF)

This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!

AS-Interface Product Range

Get to know our full range of AS-Interface products.