AS-Interface EMERGENCY STOP button VAA-2E1A-PM-S
- 2-channel, compelled connected
- Overload-protected in accordance with IEC 60947-5-5
- Integrated illumination in the actuator
- TÜV-approval for system components is available
- Biased actuator for self-monitoring
- EMERGENCY STOP unlocking by turning or pulling
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot VAA-2E1A-PM-S
| Tuotekuvaus |
|---|
| AS-Interface EMERGENCY STOP button |
| General specifications | ||
|---|---|---|
| Node type | Safety-Slave | |
| AS-Interface specification | V2.1 | |
| Required master specification | ≥ V2.0 | |
| UL File Number | E198304 | |
| Functional safety related parameters | ||
| MTTFd | 200 a | |
| B10d | 1 E+5 | |
| Electrical specifications | ||
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
| Rated operating current | ≤ 40 mA | |
| Protection class | III | |
| Insulation resistance | min. 100 MΩ | |
| Input | ||
| Number/Type | 2 NC Safety function by positive opening in accordance with IEC/EN 60947-5-1 Reset by pulling |
|
| Supply | from AS-Interface | |
| Output | ||
| Number/Type | LED red | |
| Supply | from AS-Interface | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 62026-2:2013 | |
| Degree of protection | EN 60529:2000 | |
| Electrical safety | EN 60947-5-5:1997+A1:2005 | |
| AS-Interface | EN 62026-2:2013 | |
| Functional safety | EN 62061:2005 EN 61508 Parts 1-7:2010 NFPA 79:2007 EN 60204-1:2006 |
|
| Programming instructions | ||
| Profile | S-7.B.E. | |
| IO code | 7 | |
| ID code | B | |
| ID1 code | F | |
| ID2 code | E | |
| Data bits (function via AS-Interface) | ||
| D0 | ||
| D1 | ||
| D2 | ||
| D3 | ||
| Parameter bits (programmable via AS-i) | function | |
| P0 | not used | |
| P1 | not used | |
| P2 | not used | |
| P3 | not used | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 55 °C (-13 ... 131 °F) (no freezing) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Relative humidity | 40 ... 85 % , noncondensing | |
| Mechanical specifications | ||
| Operating force | Push: 32 N Pull: 21 N Turn: 0.27 Nm Minimum for positive opening operation: 60 Nm |
|
| Operating distance | for positive opening operation: min. 4 mm maximal: 4.5 mm |
|
| Degree of protection | IP65 | |
| Connection | Crimp terminal sockets (JST) 1.5 m Connecting cable with crimp on 2 flexible leads supplied with delivery |
|
| Installation | Installation in 22 mm hole | |
| Mass | 105 g | |
| Life span | > 250,000 switching operations | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27371244 |
| ECLASS 12.0 | 27371244 |
| ECLASS 11.0 | 27371244 |
| ECLASS 10.0.1 | 27371244 |
| ECLASS 9.0 | 27371244 |
| ECLASS 8.0 | 27371244 |
| ECLASS 5.1 | 27371228 |
| ETIM 9.0 | EC002034 |
| ETIM 8.0 | EC002034 |
| ETIM 7.0 | EC002034 |
| ETIM 6.0 | EC002034 |
| ETIM 5.0 | EC002034 |
| UNSPSC 12.1 | 39121533 |
Details: VAA-2E1A-PM-S
Function
This AS-Interface emergency shutoff button is a two-channel, positively driven contact, allowing the operation of personnel protection systems when used according to specification along with an AS-Interface safety monitor. It occupies one complete address in the AS-Interface strand.
When the safety monitor is properly configured, up to EN 954-1 Category 4 and IEC 61508 SIL 3 can be achieved.
For mounting, this AS-Interface emergency shutoff button can be screwed into the front plate of the machine or the switch panel. The button can be illuminated in red.
A designation plate and suitable connection cable are included in the scope of delivery.
Product Documentation: VAA-2E1A-PM-S
| Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 330 KB |
Design / Simulation: VAA-2E1A-PM-S
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 3618 KB |
Approvals: VAA-2E1A-PM-S
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| US CA UL | E198304 | ALL | 233 KB | |
| Worldwide AS-International Association AS-Interface | 75301 | ALL | 621 KB |
Software: VAA-2E1A-PM-S
| Software Tools | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface Safety | ZIP | 622 KB |
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.