Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
VAA-2E1A-IER1-S-1M-V1
| Tuotekuvaus |
| Reed safety switch for non-contact AS-Interface safety switches |
| General specifications |
| Detection type | magnetic |
| assured start-up distance | 9 mm |
| assured release distance | max. 70 mm |
| Center offset | ± 2.5 mm at distance s = 3 mm |
| Node type | Safety-Slave |
| AS-Interface specification | V2.1 |
| Required gateway specification | ≥ V2.0 |
| Response delay | < 5 ms |
| UL File Number | E155795 |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 3 |
| Performance level (PL) | PL e |
| Mission Time (TM) | 20 a |
| PFHd | 4.29 E-8 |
| Indicators/operating means |
| LED 1 | programmable |
| LED AS-i | green: normal operation
red: no data exchange
red/yellow flashing: no data exchange
Red/green flashing: Device error in the slave
red flashing: Device error in the slave |
| Electrical specifications |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current | ≤ 30 mA |
| Power supply | via AS-Interface network |
| Output |
| Number/Type | LED red |
| Switching voltage | 24 V |
| Switching current | max. 0.5 A |
| Supply | from AS-Interface |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 IEC 60947-5-3:1999 |
| Machinery Directive | |
| Directive 2006/42/EC | EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008 |
| Standard conformity |
| Degree of protection | EN 60529:2000 |
| AS-Interface | EN 62026-2:2013 |
| Functional safety | ISO 13849-1:2008 (up to category 3/PL e) EN ISO 12100-1, -2:2003 EN 1088:1995+A2:2008 |
| Programming instructions |
| Profile | S-7.B |
| IO code | 7 |
| ID code | B |
| ID1 code | F |
| ID2 code | E |
| Data bits (function via AS-Interface) | InputOutput |
| D0 | dyn. safety code 1 - |
| D1 | dyn. safety code 1 LED 1 |
| D2 | dyn. safety code 2 - |
| D3 | dyn. safety code 2 - |
| Parameter bits (programmable via AS-i) | |
| P0 | IN1 - |
| P1 | IN2 - |
| P2 | IN3 - |
| P3 | IN4 - |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Shock and impact resistance | 30 g/11 ms |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | with fixed cable and M12 connector, 4-pin |
| Material | |
| Housing | PPS |
| Cable | PUR |
| Installation | any position |
| Dimensions | |
| Width | 25 mm |
| Depth | 13 mm |
| Length | 87.5 mm |
| Cable length | 1 m |
| Life span | 100 x 106 switching cycles |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272603 |
| ECLASS 12.0 | 27272603 |
| ECLASS 11.0 | 27272603 |
| ECLASS 10.0.1 | 27272603 |
| ECLASS 9.0 | 27272603 |
| ECLASS 8.0 | 27272603 |
| ECLASS 5.1 | 27272603 |
| ETIM 9.0 | EC001599 |
| ETIM 8.0 | EC001599 |
| ETIM 7.0 | EC001599 |
| ETIM 6.0 | EC001599 |
| ETIM 5.0 | EC001599 |
| UNSPSC 12.1 | 39121535 |
Details:
VAA-2E1A-IER1-S-1M-V1
Product Documentation:
VAA-2E1A-IER1-S-1M-V1
Design / Simulation:
VAA-2E1A-IER1-S-1M-V1
Approvals:
VAA-2E1A-IER1-S-1M-V1
Software:
VAA-2E1A-IER1-S-1M-V1
Liitännäistuotteet:
VAA-2E1A-IER1-S-1M-V1
| Matching System Components |
|
|
|
| Actuator for non-contact AS-Interface Reed safety switchfa |
|
+358 20 7861 290