Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

AS-Interface safety module VBA-4E1A-KE3-ZEJ/SR

VBA-4E1A-KE3-ZEJ/SR
  • Safety output module with diagnostic node
  • Safe relay output with galvanically isolated contact sets
  • Assigns a complete address for the safe output and one A/B address for the inputs
  • 4 inputs can be used either for diagnostics and EDM or as standard inputs
  • Applications up to category 4/PL e/SIL 3
  • Several safe output modules can be grouped into one enabling circuit

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  VBA-4E1A-KE3-ZEJ/SR

Tuotekuvaus
KE3 control cabinet module, 4 inputs, 1 control-safe relay output
General specifications
Node typeA/B node
AS-Interface specificationV2.1
Required gateway specification≥ V2.1
UL File NumberE223772
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Performance level (PL)PL e
Indicators/operating means
LED FAULTerror display; LED red
red: communication error
LED PWRAS-Interface voltage; LED green
LED INswitching state (input); 4 LED yellow
LED OUTFor flashing patterns see diagnostics table
LED ALARMPLC reports alarm; red LED
Electrical specifications
Auxiliary voltage (input)12 ... 30 V DC PELV
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current≤ 30 mA (without sensors) / max. 200 mA
Protection classIII
Surge protectionUEXT, Ue: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type4 inputs for 2- or 3-wire sensors (PNP), DC
Supplyfrom AS-Interface
Voltage21 ... 31 V DC
Current loading capacity≤ 90 mA, overload- and short-circuit proof (INT)
Input current≤ 8 mA (limited internally)
Sensor supply≤ 90 mA
Switching pointaccording to DIN EN 61131-2 (Type 2)
0 (unattenuated)≤ 2 mA
1 (attenuated)≥ 4 mA
Signal delay< 2 ms (input/AS-Interface)
Signal frequency≤ 250 Hz
Output
Number/Type1 safety relay output
Supplyfrom AS-Interface
Nominal load
Per contact3 A / 24 V DC; 3 A / 230 V AC
Usage categoryDC-13 and AC-15
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007
Standard conformity
Degree of protectionEN 60529:2000
InputEN 61131-2
Emitted interferenceEN 61000-6-4:2007
AS-InterfaceEN 62026-2:2013
Noise immunityEN 61000-6-2:2005 EN 62026-2:2013
Programming instructions
ProfileS-7.A.E
IO code7
ID codeA
ID1 code5 (Can be changed to 7 or F)
ID2 codeE
Data bits (function via AS-Interface)InputOutput
D0 E0 LED ALARM
Diagnosis (see table Device colors)
D1 E1 OUT1 (see P1)
D2 E2 -
D3 E3 = 1.Y1 -
Parameter bits (programmable via AS-i)function
P0not used
P1Output linkage:
P1 = 1: safe output switches on release.
P1 = 0: safe output switches on release and OUT1=1
P2ID1=5
not used
ID1=7 or F
P2 = 0 IN3 is input
P2 = 1 IN3 notifies of release
P3not used
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP20
Connectionremovable terminals
rated connection capacity:
rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2
for multiple-wire connection with two wires of equal cross-section:
flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2
Material
HousingPA 66-FR
Dimensions
Height99 mm
Width22.5 mm
Length107 mm
MountingDIN mounting rail

Classifications

SystemClasscode
ECLASS 13.027272603
ECLASS 12.027242604
ECLASS 11.027242604
ECLASS 10.0.127242604
ECLASS 9.027242604
ECLASS 8.027242604
ECLASS 5.127242604
ETIM 9.0EC001599
ETIM 8.0EC001599
ETIM 7.0EC001599
ETIM 6.0EC001599
ETIM 5.0EC001599
UNSPSC 12.139121535

Details: VBA-4E1A-KE3-ZEJ/SR

Function

The AS-Interface relay output module VBA-4E1A-KE3-ZEJ/SR is a control cabinet module with 4 inputs and a relay output. The inputs comprise 3 conventional and 1 EDM input. The relay-switched output can be loaded with 3 A at 24 V DC or 230 V AC. The use of the relay output module enables safe switching sequences to be achieved remotely in the field. This means that the parallel wiring of safe actuators in the field is a thing of the past.

The housing, which is only 22.5 mm wide, requires little space in the switch cabinet. The module is installed by simply snapping it onto the 35 mm standard mounting rail to EN 50022. An addressing socket is integrated in the module.

The connection is made via plug-in terminals. Four-terminal blocks (black) are used for the outputs. Connection of the AS-Interface is by means of a 2-station terminal block (yellow). This permits the simple removal of the sensors or of the supply during commissioning or servicing. The supply to the inputs and the connected sensors is fed internally via the module from the AS-Interface. The current switching state of the inputs and of the output relay is indicated via yellow LEDs. Communication faults and the set output bit A0 are indicated via red LEDs. The display of the operating voltage and the address 0 is provided by a green LED.

Access to the addressing of the safe output slaves and of the integrated A/B-Slaves takes place by switching over the programming switch to the operating mode “Prg” and “Run”.

Product Documentation: VBA-4E1A-KE3-ZEJ/SR

Language Selection:
Brief InstructionsKieliTiedostotyyppiTiedoston koko
Mounting Instruction VBA-4E1A-KE3-ZEJ/SR / Montageanleitung VBA-4E1A-KE3-ZEJ/SRALLPDF969 KB
Safety and Security Documentation
Instruction Manual VBA-4E1A-KE3-ZEJ/SR / Betriebsanleitung VBA-4E1A-KE3-ZEJ/SRALLPDF2862 KB
Manuals
Manual VBA-4E1A-KE3-ZEJ/SRENGPDF2769 KB

Design / Simulation: VBA-4E1A-KE3-ZEJ/SR

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP4525 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ1055 KB

Approvals: VBA-4E1A-KE3-ZEJ/SR

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
US CA ULE223772ALLLINK---

Software: VBA-4E1A-KE3-ZEJ/SR

Language Selection:
Software ToolsJulkaisutiedotTiedostotyyppiTiedoston koko
SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface SafetyZIP622 KB

Liitännäistuotteet: VBA-4E1A-KE3-ZEJ/SR

Accessories

AS-Interface Handheld with accessoryfa

Adapter cable module/hand-held programming devicefa
25-point wiring link for control cabinet modules with screw terminalsfa
AS-Interface Product Range

Get to know our full range of AS-Interface products.