Optische Sensoren

Niet beschikbaar voor verkoop

Safety light grid SLP8-2

Sensing range 8 m
Self-monitoring (type 4 according to IEC/EN 61496-1)
2-radial design
Beam spacing 500 mm
Red transmission light
Integrated function display
Operating reserve indication
Operation on control units of SB4 (SafeBox)

Technical Data
Design / Simulation
Approvals
Software
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens SLP8-2

Productbeschrijving
Safety light grid

System components
Transceiver		SLP8-2-A
Mirror pillar		SLP8-2-M
General specifications
Effective detection range		0.2 ... 8 m
Light source		LED
Light type		modulated visible red light
Tests		IEC/EN 61496
Safety type according to IEC/EN 61496		4
Marking		CE
Target size		static: 32 mm dynamic: 50 mm (at v = 1.6 m/s of the obstacle)
Beam spacing		500 mm
Number of beams		2
Opening angle		< 5 °
Functional safety related parameters
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		2.81 E-9
Type		4
Indicators/operating means
Operation indicator		LED red in transceiver
Function indicator		LED red: per receiver channel off: Interruption flashes: receiver continuously on: reception with sufficient stability control
Stability alarm indicator		Functional display flashing
Electrical specifications
Operating voltage		Power supply via control unit
Protection class		III , IEC 61140
Conformity
Functional safety		ISO 13849-1
Product standard		EN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformity		CE
Approvals		TÜV SÜD
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Mechanical specifications
Degree of protection		IP65
Connection		M16 cable gland , terminal compartment
Connection options		Further electrical connection options on request: Connector DIN 43 651 Hirschmann, emitter: 6-pin+PE, receiver: 11-pin+PE
Material
	Housing	extruded aluminum profile, RAL 1021 (yellow) coated
	Optical face	Plastic pane
Mass		Per 2100 g

Classifications

System	Classcode
ECLASS 13.0	27272703
ECLASS 12.0	27272703
ECLASS 11.0	27272703
ECLASS 10.0.1	27272703
ECLASS 9.0	27272703
ECLASS 8.0	27272703
ECLASS 5.1	27272703
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	46171620

Details: SLP8-2

Design / Simulation: SLP8-2

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	214 KB
CAD 3-D additional / CAD 3-D additional	ALL	STP	207 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SLP8-2

Certificates	Certificaatnummer	Taal	Bestandstype	Bestandsgrootte
/cert/cert4281a.pdf	UL-CA-L215245-21-10607002-2 / UL-US-L215245-11-10607002-3	ALL	PDF	570 KB
Canada USA UL Ordinary Location	E87056	ALL	LINK	---

Software: SLP8-2

Software Tools	Vrijgave-informatie	Bestandstype	Bestandsgrootte
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

Aanverwante producten: SLP8-2

Matching System Components

	SB4-OR-4XP Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-4M Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-4X Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

Accessories

	SLP-X-M Mounting aid Safety
	Deflecting mirror for multi-sided protection safety layouts using SLP series safety light grids, Housing: Extruded aluminum profile , powder coated , RAL 1021 (yellow)fa

	PG SLP-X Mounting aid Safety
	Glass panel to protect the light outlet surface of safety light grids and curtains, Material: mineral glass lensfa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

De “Functional Safety Hub” van Pepperl+Fuchs

Bezoek onze Functional Safety Hub

Honderden producten met een SIL-/ PL-classificatie, gratis tools en brochures in één locatie: de "Functional Safety Hub" is uw startpunt voor al uw veiligheidsfuncties.

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.