Optische Sensoren

Niet beschikbaar voor verkoop

Safety light curtain SLC30-1050/133

ATEX-approval for zone 2 and zone 22
Sensing range up to 15 m
Resolution 30 mm (hand protection)
Self-monitoring (type 4 according to IEC/EN 61496-1)
Safety outputs OSSD, external status displays OSSD
Start/Restart disable
Integrated function display
Operating reserve indication

Technical Data
Product Documentation
Design / Simulation
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

De complete datasheet als PDF downloaden:

Technische gegevens SLC30-1050/133

Productbeschrijving
Safety light curtain

System components
Emitter		SLC30-1050-T/133
Receiver		SLC30-1050-R/133
General specifications
Effective detection range		0.2 ... 15 m
Light source		IRED
Light type		modulated infrared light
LED risk group labelling		exempt group
Tests		IEC/EN 61496
Safety type according to IEC/EN 61496		4
Width of protected area		0.2 ... 15 m
Protection field height		1050 mm
Number of beams		56
Operating mode		can be selected with or without start/restart disable
Optical resolution		30 mm
Opening angle		< 5 °
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		1.5 E-8
Type		4
Indicators/operating means
Operation indicator		7-segment display in emitter
Diagnostics indicator		7-segment display in receiver
Function indicator		in receiver: LED red: OSSD off LED green: OSSD on LED yellow: Protected area free, system start-ready
Stability alarm indicator		LED orange
Control elements		switch for start/restart disable, transmission coding
Electrical specifications
Operating voltage		24 V DC (-30 %/+25 %)
No-load supply current		Emitter: ≤ 100 mA receiver: ≤ 150 mA
Protection class		III
Input
Activation current		approx. 10 mA
Activation time		0.03 ... 1 s
Test input		Reset-input for system test
Function input		Start release
Output
Safety output		2 separated fail safe semiconductor outputs
Signal output		1 PNP, max. 100 mA for start readiness , short-circuit protected 1 PNP, max. 100 mA for OSSD status , short-circuit protected
Switching voltage		Operating voltage -2 V
Switching current		max. 0.5 A
Response time		20 ms
Compliance with standards and directives
Directive conformity
	Machinery Directive 2006/42/EC	EN ISO 13849-1:2008 ; EN 61496-1:2013
	EMC Directive 2004/108/EC	EN 61000-6-4:2007+A1:2011
Standard conformity
	Standards	IEC 61496-2:2013
Approvals and certificates
CE conformity		CE
CCC approval		CCC approval / marking not required for products rated ≤36 V
TÜV approval		TÜV
Ambient conditions
Ambient temperature		0 ... 55 °C (32 ... 131 °F)
Storage temperature		-25 ... 70 °C (-13 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Mechanical specifications
Housing length L		1160 mm
Degree of protection		IP66
Connection		M20 cable gland , Cable diameter ∅5.5 ... 13 mm , terminal compartment with screw terminals, lead cross-section max. 1.5 mm²
Material
	Housing	extruded aluminum profile, RAL 1021 (yellow) coated
	Optical face	Plastic pane
Mass		per 3450 g
Dimensions
	Width	52 mm
	Depth	55 mm
	Length	1160 mm
Equipment protection level Gc (nA)
ATEX marking		II 3 G Ex nAc op is IIC T4
Directive conformity		94/9/EG
Standards		EN 60079-0:2009 , EN 60079-15:2010 , EN 60079-28:2007
Equipment protection level Dc
ATEX marking		II 3 D Ex tc IIIC T90 °C
Directive conformity		94/9/EG
Standards		EN 60079-31:2009
General information
Use in the hazardous area		see more details for the use in hazardous areas
	Category	3G; 3D

Classifications

System	Classcode
ECLASS 13.0	27272704
ECLASS 12.0	27272704
ECLASS 11.0	27272704
ECLASS 10.0.1	27272704
ECLASS 9.0	27272704
ECLASS 8.0	27272704
ECLASS 5.1	27272704
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	46171620

Details: SLC30-1050/133

Product Documentation: SLC30-1050/133

Safety and Security Documentation	Taal	Bestandstype	Bestandsgrootte
Safety Manual	ENG	PDF	2257 KB

Design / Simulation: SLC30-1050/133

CAD	Taal	Bestandstype	Bestandsgrootte
CAD 3-D / CAD 3-D	ALL	STP	199 KB

Aanverwante producten: SLC30-1050/133

Matching System Components

	SB4-OR-4XP Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-4M Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-4X Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

De “Functional Safety Hub” van Pepperl+Fuchs

Bezoek onze Functional Safety Hub

Honderden producten met een SIL-/ PL-classificatie, gratis tools en brochures in één locatie: de "Functional Safety Hub" is uw startpunt voor al uw veiligheidsfuncties.

Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
phone +31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
phone +31 73 75 07 108

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.