Redundancy Field Unit, Stainless Steel LB9523-T7*-*-***-**-*-Y*
- Preconfigured enclosures for engineered LB systems
- Max. 22 slots for I/O modules
- Installation in Zone 2 or safe area
- Impact resistance enclosure, IP66
- For PROFIBUS DP, PROFIBUS DP V1, PROFINET, and MODBUS RTU
- Redundancy (field bus and power supply)
- Image is generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques LB9523-T7*-*-***-**-*-Y*
| Description produit |
|---|
| Redundancy Field Unit, Stainless Steel |
| General specifications | ||
|---|---|---|
| Installed components | backplane LB9022E | |
| Slots | ||
| Bus coupler | 2 | |
| Supply | 3 | |
| I/O modules (single width) | max. 22 | |
| I/O modules (dual width) | max. 11 | |
| Supply | ||
| Connection | screw terminals, max. 10 mm2 | |
| Rated voltage | 24 V DC | |
| Redundancy | yes | |
| Fieldbus connection | ||
| Fieldbus type | PROFIBUS DP/DP-V1, PROFINET or MODBUS RTU , depends on bus coupler | |
| Connection | 9-pin Sub-D connector (not included with delivery) | |
| Redundancy | yes | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61439-1:2012 (J.9.2.2 b) , EN 61439-2:2012 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Impact resistance | EN 60079-0 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 40 °C (-4 ... 104 °F) further on request | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Relative humidity | < 75 % (annual mean) < 95 % (30 d/year), no moisture condensation |
|
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
|
| Impact resistance | 7J | |
| Mechanical specifications | ||
| Enclosure cover | hinged door with quarter-turn key locks | |
| Cover seal | foamed silicone | |
| Degree of protection | IP66 | |
| Cable entry face B | ||
| M16 quantity | 192 | |
| M16 series | Cable Glands, Plastic | |
| M16 type | CG.PIDS1.M16.* | |
| M16 clamping range | 4 ... 8 mm | |
| M16 info | field signals | |
| M20 quantity | 4 | |
| M20 series | Cable Glands, Plastic | |
| M20 type | CG.PEDS1.M20.* | |
| M20 clamping range | 6 ... 12 mm | |
| M20 info | Fieldbus | |
| M25 quantity | 2 | |
| M25 series | Cable Glands, Plastic | |
| M25 type | CG.PEDS1.M25.* | |
| M25 clamping range | 10 ... 18 mm | |
| M25 info | Power Supply | |
| Terminal assembly | ||
| Number of vertical rails | 3 | |
| Usable length per horizontal rail | 210 mm | |
| Terminal type | max. 120 spring terminal or screw terminal | |
| Material | ||
| Cable gland | Polyamide (PA) | |
| Seal | housing: foamed silicone cable gland: chloroprene |
|
| Mass | approx. 25 kg , without modules | |
| Dimensions | ||
| External dimension (A) | 800 mm | |
| External dimension (B) | 800 mm | |
| External dimension (C) | 300 mm | |
| Mounting | 4 Mounting bracket for wall mounting included in the scope of delivery | |
| Grounding | M8 internal/external brass nickel-plated grounding bolt | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | ||
| Marking |  II 3(1/2)G Ex eb nA [ia Ga/ib Gb/ic] IIC T4 Gc II 3(1/2)D Ex tb [ia Da/ib Db/ic] IIIC T130°C Dc |
|
| Certificate | PF 16 CERT 1267 X | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2018 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-31:2014 | |
| General information | ||
| Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210190 |
| ECLASS 12.0 | 27210190 |
| ECLASS 11.0 | 27210190 |
| ECLASS 10.0.1 | 27210190 |
| ECLASS 9.0 | 27210190 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27242692 |
| ETIM 9.0 | EC000200 |
| ETIM 8.0 | EC000200 |
| ETIM 7.0 | EC000200 |
| ETIM 6.0 | EC000200 |
| ETIM 5.0 | EC000200 |
| UNSPSC 12.1 | 39121008 |
Details: LB9523-T7*-*-***-**-*-Y*
Informative Literature: LB9523-T7*-*-***-**-*-Y*
| Literature | Langue | Type de fichier | Taille |
|---|---|---|---|
| Application Report - Communication Redundancy for Uninterrupted Operation | ENG | 529 KB | |
| Application Report - LB and FB Remote I/O Systems for Digitally Connecting Analog Field Devices | ENG | 208 KB | |
| Application Report - Space Saving Extension for Existing Plants | ENG | 300 KB | |
| Application Report - The Modern Whiskey Distillery | ENG | 176 KB | |
| Application Report - Use of Remote I/O in Fluidized Bed Systems | ENG | 222 KB | |
| Application Report - Using Remote I/O Systems for the Efficient Digitalization of Plants | ENG | 371 KB |
Approvals: LB9523-T7*-*-***-**-*-Y*
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| South Africa MASC | MASC MS/20-8436X | ALL | 955 KB |
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons
Certifiée Zone 2 et Classe I/Div. 2, la nouvelle passerelle PROFINET d'E/S déportées de Pepperl+Fuchs ouvre la voie à des applications de l'Industrie 4.0 dans les industries de transformation.
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.