Support en ligne pour la protection contre le risque d’explosion
Support en ligne pour la protection contre le risque d’explosion
Support en ligne pour la protection contre le risque d’explosion
FO Splice Boxes in Glass-Fiber Reinforced Polyester GR.TFO.18.36.10.B-S0006
- Safe protection of fiber optic cable splices in hazardous areas
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Ex op pr and Ex tb certified
- Carbon loaded, antistatic glass-fiber reinforced polyester
- 179 mm x 359 mm x 104 mm
- Modern design with high impact resistance
- Easy installation due to easily accessible mounting points
- Easy cover opening without damage due to mulitple pry points
- Left side cable gland polyamide, 6x M20; right side cable gland polyamide, 6x M20
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques GR.TFO.18.36.10.B-S0006
| Mechanical specifications | ||
|---|---|---|
| Enclosure cover | fully detachable | |
| Cover fixing | ||
| Screws | M6 stainless steel combination Phillips and slotted screw | |
| Number | 4 | |
| Tightening torque | 3.5 Nm | |
| Cover seal | foamed silicone | |
| Degree of protection | IP66 | |
| Cable entry | thru-holes | |
| Cable entry face C | ||
| M20 quantity | 6 | |
| M20 series | Cable Glands, Plastic | |
| M20 type | CG.PEDS1.M20.* | |
| M20 clamping range | 6 ... 12 mm | |
| Cable entry face D | ||
| M20 quantity | 6 | |
| M20 series | Cable Glands, Plastic | |
| M20 type | CG.PEDS1.M20.* | |
| M20 clamping range | 6 ... 12 mm | |
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) | |
| Finish | inherent color black | |
| Grounding plate | 2 mm brass optional | |
| Mass | approx. 2.9 kg | |
| Dimensions | ||
| External dimension (A) | 179 mm | |
| External dimension (B) | 359 mm | |
| External dimension (C) | 104 mm | |
| Internal dimension (D) | 156 mm | |
| Internal dimension (E) | 336 mm | |
| Internal dimension (F) | 81.5 mm | |
| Mounting holes distance (G) | 156 mm | |
| Mounting holes distance (H) | 306 mm | |
| Mounting holes diameter (J) | 7 mm | |
| Thickness of mounting brackets (N) | 18 mm | |
| Mounting | 4 screws | |
| Grounding | none as standard optional M6 or M8 internal/external brass nickel-plated grounding bolt optional M6 or M8 internal/external stainless steel grounding bolt |
|
| Fiber optic splice tray | ||
| Number | 6 | |
| Dimensions | 142 mm x 92 mm x 8 mm | |
| Quantity of splice connections per tray | 12 | |
| Type of splices | fusion with 60 mm heatshrink protectors | |
| Fiber optic splicing protection holders per tray | 2 for heatshrink splice protectors 60 mm, 6 splices each | |
| Fiber optic strain relief per tray | 2 each for 12 fibers with 0.9 mm or 1.1 mm insulation, removeable | |
| Fiber optic cables min. bending radius | 35 mm | |
| Fiber optic cables frequency range | 10 ... 10000 MHz | |
| Standards | DIN 47662 and Telecom standards | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CML 17 ATEX 3255X BASEEFA 14 ATEX 0368U |
|
| Marking |  II 2 GD Ex op pr IIC T* Gb Ex tb IIIC T** °C Db T6/T80 °C @ Ta +40 °C T5/T95 °C @ Ta +55 °C |
|
| International approvals | ||
| IECEx approval | IECEx CML 17.0144X IECEx BAS 14.0169U |
|
| UKCA approval | CML 21 UKEX 3896X | |
| Further approvals | further on request | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| CE marking | 0102 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Optional accessories | M6 or M8 internal/external brass nickel-plated grounding bolts M6 or M8 internal/external stainless steel grounding bolts |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180502 |
| ECLASS 12.0 | 27180502 |
| ECLASS 11.0 | 27180502 |
| ECLASS 10.0.1 | 27180502 |
| ECLASS 9.0 | 27180502 |
| ECLASS 8.0 | 27180502 |
| ECLASS 5.1 | 27180502 |
| ETIM 9.0 | EC002503 |
| ETIM 8.0 | EC002503 |
| ETIM 7.0 | EC002503 |
| ETIM 6.0 | EC002503 |
| ETIM 5.0 | EC002713 |
| UNSPSC 12.1 | 39121314 |
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons
La nouvelle série de coffrets SR en acier inoxydable se distingue par son concept modulaire : découvrez la gamme de coffrets qui répond parfaitement à toutes les applications, à tous les niveaux…
Utilisez notre outil en ligne pour configurer rapidement votre propre boîte de jonction.
Vous recevrez un devis sous un jour ouvré !
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2025 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.