Cable Glands, Metal, for non-armored Cables CG.NA.M50.BN.C.18.K04
- For cables without armor
- Brass nickel-plated
- Thread M50
- Seal chloroprene
- Ex db, Ex eb and Ex tb certified
- Suitable for operation in Zone 1, Zone 2, Zone 21 and Zone 22
- Suitable for operation in Class I, Zone 1/2/22
- Suitable for operation in Class I, Division 2 when installed in accordance with NEC501.10(B)(2)
- Degree of protection IP66 / IP68, UL Type 4X
- Packaging unit: 4 pieces, without accessories
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques CG.NA.M50.BN.C.18.K04
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 44 mm | |
| Seal combination S1 | 41 ... 44 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 , UL Type 4X | |
| Material | ||
| Finish | inherent color silver | |
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | ||
| Individual component | approx. 438 g | |
| Packing unit | approx. 1.93 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | IMQ 14 ATEX 012X | |
| Marking |  II 2 GD Ex db IIC Gb Ex eb IIC Gb Ex tb IIIC Db |
|
| International approvals | ||
| UL approval | ||
| cULus | E490324 tested to UL 514B E490962 tested to UL 2225 CSA 60079-7 , CSA 60079-31 |
|
| IECEx approval | IECEx IMQ 14.0004X | |
| UKCA approval | CML 21 UKEX 11380X | |
| INMETRO approval | DNV 20.0029 X | |
| EAC approval | RU C-DE.AA87.B.00459/20 | |
| CCC approval | 2021312313000344 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) |
|
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27140802 |
| ECLASS 12.0 | 27140802 |
| ECLASS 11.0 | 27144434 |
| ECLASS 10.0.1 | 27144434 |
| ECLASS 9.0 | 27144434 |
| ECLASS 8.0 | 27149111 |
| ECLASS 5.1 | 27149111 |
| ETIM 9.0 | EC000441 |
| ETIM 8.0 | EC000441 |
| ETIM 7.0 | EC000441 |
| ETIM 6.0 | EC000441 |
| ETIM 5.0 | EC000441 |
| UNSPSC 12.1 | 31181702 |
Details: CG.NA.M50.BN.C.18.K04
Product Documentation: CG.NA.M50.BN.C.18.K04
| Brief Instructions | Langue | Type de fichier | Taille |
|---|---|---|---|
| Brief Instructions - Cable Glands Series CG.NA.*/CG.EM.* | ENG | 296 KB | |
| Safety and Security Documentation | |||
| Manuel d'instructions | FRA | 162 KB | |
Approvals: CG.NA.M50.BN.C.18.K04
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Brasil DNV GL Brasil | DNV 20.0029 X | ALL | 319 KB | |
| CCC Ex Certificate | 2021312313000344 (Bimed Teknik) | ALL | 1849 KB | |
| Europe IMQ ATEX Category 2 D ATEX Category 2 G | IMQ 14 ATEX 012 X | ALL | 987 KB | |
| IMQ IECEx Certificate of Conformity | IECEx IMQ 14.0004X | ALL | LINK | --- |
| UK-Type Examination Certificate | CML 21UKEX11380X | ALL | 137 KB | |
| UL UL | E490324 | ALL | LINK | --- |
| UL cUL | E490962 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-1897D | ALL | 371 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-5885 | ALL | 156 KB | |
Produits associés : CG.NA.M50.BN.C.18.K04
| Matching System Components | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.