Switch Disconnectors Ex e DIS.*
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Ex db eb and Ex tb certified
- Various contact configurations and pole numbers
- Glass reinforced polyester (GRP) or stainless steel enclosures
- Padlockable switch
- Labeling '0 - I'
- Function-adequate cable gland configurations
- Degree of protection: IP 66
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques DIS.*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 690 V max. | |
| Rated impulse withstand voltage | 6 kV | |
| Rated frequency | 50/60 Hz | |
| Short circuit current limitation | recommended: 25 A : 35 A, gG 40 A : 63 A, gG |
|
| Operating current | 25 A max. or 40 A max. | |
| Terminal capacity | see data table | |
| Rated insulation voltage | 800 V | |
| Function | switch disconnector | |
| Color | black and red-yellow | |
| Contact configuration | see data table | |
| Switching configuration | 2 position changeover with left OFF | |
| Usage category | see data table | |
| Number of poles | see data table | |
| Auxiliary contacts | see data table | |
| Auxiliary contacts usage category | see data table | |
| Operator action | engage - engage | |
| Lockable | in 'OFF' position threefold padlockable | |
| Labeling | 0 - I | |
| Mechanical specifications | ||
| Enclosure range | see table | |
| Enclosure cover | fully detachable | |
| Cover fixing | stainless steel A4 (V4A) hexagonal head screws or stainless steel combination Phillips and slotted screw | |
| Screws | M6 | |
| Number | 4 | |
| Tightening torque | 3.5 Nm | |
| Cover seal | foamed silicone | |
| Safety | cover detachable only when operator in 'ON' position with SAF.* variants | |
| Degree of protection | IP66 | |
| Cable entry | see data table | |
| Defined entry area | face B | |
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) or AISI 316L, (1.4404) stainless steel | |
| Finish | inherent color black or brushed | |
| Mass | see data table | |
| Dimensions | see data table | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of cable glands | |
| Mounting | see data table | |
| Grounding | GRP none as standard stainless steel M6 internal/external brass nickel-plated grounding bolt |
|
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) @ T4 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CML 16 ATEX 3009X | |
| Marking |  II 2 GD Ex db eb IIC T* Gb Ex tb IIIC T** °C Db T4/T130 °C @ Ta +55 °C |
|
| International approvals | ||
| IECEx approval | IECEx CML 16.0008X | |
| UKCA approval | CML 22 UKEX 2550X | |
| ECAS approval | 22-10-53256/E22-09-052316/NB0002 | |
| IA approval | MASC S/18-0003X | |
| CCC approval | 2020322304002545 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: DIS.*
Product Documentation: DIS.*
| Brief Instructions | Langue | Type de fichier | Taille |
|---|---|---|---|
| Brief Instructions - Switch Disconnectors Ex e / Safety Switches Ex e - DIS* / SAF* | ENG | 754 KB |
Approvals: DIS.*
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| CML IECEx Certificate of Conformity | IECEx CML 16.0008X | ALL | LINK | --- |
| China SITIIAS CCC Ex Certificate | 2020322304002545 (Pepperl+Fuchs SE,Mannheim) | ALL | 13190 KB | |
| ECASEx | 24-02-102377/E22-12-059623/NB0002 | ALL | 850 KB | |
| Europe CML ATEX | CML 16ATEX3009X | ALL | 298 KB | |
| UK-Type Examination Certificate | CML 22UKEX2550X | ALL | 264 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3235B | ALL | 254 KB | |
- Demandez à un Expert
- Demande pour une référence équivalente
- Suivi de votre commande en cours
- Nouveautés
- Service Level Agreements for ecom instruments
- Où commander
- Sélection de documentations
- Technologies
- Solutions systèmes de contrôle
- Recherche de documents techniques, catalogues ou brochures
- Articles de presse
- Salons
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.