Vibration sensor VIM82PL-S1V16-2CE-I422C28

Suitable for SIL2/Pld applications
Rugged stainless steel housing
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Suitable for use in harzadous area up to Zone 2/21 with type of protection increased safety and for Class I/II and Division 2

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler VIM82PL-S1V16-2CE-I422C28

Ürün Açıklaması
Vibration sensor with safety function both for the analog current output and for the 2 relay outputs with adjustable swichting thresholds

General specifications
Type		Vibration sensor
Measuring technology		MEMS
Series		Performance Line
Measured variable		Vibration velocity
Measuring range
	Vibration velocity	0 ... 16 mm/s
Measurement accuracy		± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s
Cross-sensitivity		< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
Frequency range		10 ... 1000 Hz
Averaging time		for v-rms: 2 s
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Performance level (PL)		PL d
Category		Cat. 2
MTTF_d		329 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		min. 90 %
Indicators/operating means
Status indicator		6 LEDs for operating states
Control elements		4 rotary switches and 1 push button for programming
Electrical specifications
Fusing		external fuse is required: 3 A , semi-time-lag , 30 V DC
Operating voltage		24 V DC + 7 % / - 10 %
Current consumption		max. 100 mA
Power consumption		2.6 W
Time delay before availability		15 s (initially self-test functions are executed before safe measured values are available at the output)
Surge protection		up to 2 kV
Output 1
Output type		relay
Switching function		Normally open (NO)
Switching voltage		max. 30 V DC
Switching current		max. 1 A
Output 2
Output type		relay
Switching function		Normally open (NO)
Switching voltage		max. 30 V DC
Switching current		max. 1 A
Output 3
Output type		analog output, current output of the vibration variable
Output current		4 ... 20 mA
Load resistor		≤ 500 Ω
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67
Shock resistance		DIN EN 60068-2-27, 60 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Vibration evaluation		DIN ISO 10816/20816
Functional safety		DIN EN IEC 61508 , SIL 2 EN ISO 13849 , PL d
Approvals and certificates
IECEx approval
	Equipment protection level Gc	IECEx ULD 22.0031X
	Equipment protection level Dc	IECEx ULD 22.0031X
ATEX approval
	Equipment protection level Gc	UL 22 ATEX 2870 X
	Equipment protection level Dc	UL 22 ATEX 2870 X
UL approval
	Ordinary Location	E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request
	Hazardous Location	E106378
	Maximum permissible ambient temperature	max. 60 °C (max. 140 °F)
	Control drawing	116-0493
Ambient conditions
Ambient temperature		-35 ... 60 °C (-31 ... 140 °F)
Measuring head temperature		-35 ... 125 °C (-31 ... 257 °F) directly at the mounting point
Storage temperature		-35 ... 60 °C (-31 ... 140 °F)
Mechanical specifications
Connection type		cable
Housing material		Stainless steel 1.4305 / AISI 303
Degree of protection		IP66 / IP67 only in connected state and correctly mounted housing cover
Cable
	Number of cores	8
	Length	2 m
Mass		880 g
Dimensions
	Height	46 mm
	Width	62 mm
	Length	77.3 mm
General information
Scope of delivery		1 x allen head screw M8 x 20 1 x spring washer M8 1 x seal label
Use in the hazardous area		see instruction manuals Only use accessories specified by the manufacturer.

Classifications

System	Classcode
ECLASS 13.0	27271103
ECLASS 12.0	27201406
ECLASS 11.0	27201406
ECLASS 10.0.1	27201406
ECLASS 9.0	27201406
ECLASS 8.0	27201406
ECLASS 5.1	27201406
ETIM 9.0	EC004309
ETIM 8.0	EC004309
ETIM 7.0	EC002959
ETIM 6.0	EC002959
ETIM 5.0	EC001758
UNSPSC 12.1	41114624

Details: VIM82PL-S1V16-2CE-I422C28

Function

The vibration sensor determines the vibration quantity using rms (root mean square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The vibration sensor has a safety integrity level (SIL 2) for usage in functional safety applications.

For monitoring tasks within the scope of functional safety, 2 relay outputs with adjustable switching thresholds are available. With simultaneous evaluation of both relay outputs by a controller, monitoring of a pre-alarm and main alarm thus is possible, e.g. as part of Condition Monitoring.

Furthermore there is an approval for the use of the sensor in hazardous areas.

Informative Literature: VIM82PL-S1V16-2CE-I422C28

Literature	Dil	Dosya Tipi	Dosya Boyutu
Product Overview - Vibration Sensors	ENG	PDF	1351 KB

Product Documentation: VIM82PL-S1V16-2CE-I422C28

Brief Instructions	Dil	Dosya Tipi	Dosya Boyutu
Instruction leaflet / Beipackzettel	ALL	PDF	240 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	160 KB
Manual	ENG	PDF	1955 KB
Manuals
Manual VIM8* Vibration Sensors	ENG	PDF	2780 KB

Design / Simulation: VIM82PL-S1V16-2CE-I422C28

CAD	Dil	Dosya Tipi	Dosya Boyutu
CAD 3-D / CAD 3-D	ALL	STP	1187 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	122 KB

Approvals: VIM82PL-S1V16-2CE-I422C28

Certificates	Sertifika No.	Dil	Dosya Tipi	Dosya Boyutu
Canada, USA UL Hazardous Location	E106378	ALL	PDF	442 KB
Europe UL II 3 GD ATEX Category 3	UL 22 ATEX 2870 X	ALL	PDF	190 KB
Worldwide IECEx Certificate of Conformity	IECEx ULD 22.0031X	ALL	LINK	---
Worldwide TÜV SÜD Functional Safety Certificate	Z10 020068 0096	ALL	PDF	298 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	146 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-6854	ALL	PDF	333 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6855	ALL	PDF	327 KB

İlişkili Ürünler: VIM82PL-S1V16-2CE-I422C28

Accessories

	MONAD-M08-1,25-M08-1,25K/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa

	RSL8-CS-SC-M55P200 Protective rubber sleeve
	Protective rubber sleeve for VIM8* vibration sensors against ingress of moisture and mechanical effectsfa

	MONAD-M08-1,25-M30-3,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa

	MONAD-M08-1,25-M20-2,5/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa

	MONAD-M08-1,25-M10-1,5/8 Mounting adapter
	Mounting adapter for VIM3/VIM6 vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa

	MONAD-M08-1,25-M12-1,75/8 Mounting adapter
	Mounting adapter for VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M12 x 1.75, screw-in depth 21fa

	MONAD-M08-1,25-M16-2,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa

	MONAD-M08-1,25-M24-3,0/368 Mounting adapter
	Mounting adapter for VIM3/VIM6/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.