Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Ürün Açıklaması |
---|
Add-In for PACTware |
Software | ||
---|---|---|
Software requirements | PACTware Version 4.1 or higher or PACTware Version 5.0.2.33 or higher |
|
Operating system | Microsoft Windows 7 (32 and 64 Bit) Microsoft Windows 8 (32 and 64 Bit) Microsoft Windows 10 (32 und 64 Bit) |
|
Operating conditions | Supports Pepperl+Fuchs IO-Link master02 USB (item number 304074) Supports all sensors with IO-Link interface via their IODD and most Pepperl+Fuchs sensors with IO-Link interface additionally via their DTM. |
System | Classcode |
---|---|
ECLASS 13.0 | 27242501 |
ECLASS 12.0 | 27242501 |
ECLASS 11.0 | 27242501 |
ECLASS 10.0.1 | 27242501 |
ECLASS 9.0 | 27242501 |
ECLASS 8.0 | 27242501 |
ECLASS 5.1 | 27242501 |
ETIM 9.0 | EC000809 |
ETIM 8.0 | EC000809 |
ETIM 7.0 | EC000809 |
ETIM 6.0 | EC000809 |
ETIM 5.0 | EC000809 |
UNSPSC 12.1 | 43232901 |
The Pepperl+Fuchs Connection Wizard is a supplement to the PACTware configuration tool. Double-click the wizard icon to automatically start the latest PACTware version installed on the PC. The IO-Link USB master connected to the PC and the sensor to be parameterized are then automatically detected by the wizard. The corresponding driver components such as DTM or IODD are loaded into the PACTware project. Finally, the wizard establishes communication to the connected sensor. This provides quick, direct access to sensor parameters.
Software Tools | Sürüm Bilgileri | Dosya Tipi | Dosya Boyutu |
---|---|---|---|
Pepperl+Fuchs PACTware Connection Wizard (Add-In for parameterization software PACTware) / Pepperl+Fuchs PACTware Connection Wizard (Add-In für Parametriersoftware PACTware) | 1.0.0.3 | ZIP | 295 KB |