Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
UC4000-L2M-B16-0,3M-APS5P-M
Ürün Açıklaması |
Single head system |
General specifications |
Sensing range | 200 ... 4000 mm |
Adjustment range | 240 ... 4000 mm |
Dead band | 0 ... 200 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 85 kHz |
Nominal ratings |
Linearity error | < 40 mm |
Temperature drift | < +/- 100 mm |
Time delay before availability | ≤ 700 ms |
Functional safety related parameters |
MTTFd | 431 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
LED yellow | object in evaluation range |
LED red/green | CANopen status display |
Electrical specifications |
Operating voltage | 9 ... 30 V |
No-load supply current | ≤ 50 mA |
Power consumption | typ. 0.6 W |
Interface |
Interface type | CAN |
Communication protocol | CANopen |
Process data | Input: 48 Bit - measured value (distance value) 16 Bit - signal quality 8 Bit - counter-1 16 Bit or counter-2 8 Bit - status register 8 Bit |
Node ID | programmable |
Vendor ID | 173 (0xAD) |
Product code | 50331651 (0x03000003) |
Transfer rate | 250 kBit/s , programmable 125 ... 1000 kBit/s |
Termination | external |
Cycle time | 53.5 ms preset , programmable |
Min. cycle time | 53.5 ms |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
| Communication interface | CiA 310, Ver. 4.2.0 |
Approvals and certificates |
UL approval | UL Recognized , General purpose , Class 2 power source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
UN/ECE Regulation No. 10 (E1) | Type-approval number: 10R-069608 |
Ambient conditions |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | fixed cable with plug |
Degree of protection | IP68 |
Material | |
| Housing | PA-GF35 |
Connector | |
| Number of pins | 5 |
| Connection assembly | AMP connector Superseal 282107-1 AMP contact Superseal 282109-1 |
Cable | |
| Cable diameter | 7.25 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Color | black |
| Number of cores | 5 |
| Core cross section | 0.8 mm2 |
| Length | 345 mm ± 5 mm |
Mass | 245 g |
Dimensions | |
| Height | 40 mm |
| Width | 40 mm |
| Length | 67 mm |
Factory settings |
Default setting | measured value "distance", signal quality, counter-2 (object 0x2000)
|
Beam width | wide (object 0x4000) |
Synchronization | deactivated (object 0x2020) |
Node ID | 16 |
Transfer rate | 250 kBit/s |
Classifications
System | Classcode |
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Details:
UC4000-L2M-B16-0,3M-APS5P-M
Product Documentation:
UC4000-L2M-B16-0,3M-APS5P-M
Design / Simulation:
UC4000-L2M-B16-0,3M-APS5P-M
Approvals:
UC4000-L2M-B16-0,3M-APS5P-M
Software:
UC4000-L2M-B16-0,3M-APS5P-M
İlişkili Ürünler:
UC4000-L2M-B16-0,3M-APS5P-M
Accessories |
|
|
|
Terminal resistor M12 male straight A-coded 5-pin, for DeviceNet, CANopenfa |
|