Fabrika Otomasyonu
Proses Otomasyonu
Endüstriyel Sensörler

USi-industry evaluation unit USIM-F264-4E5-V19

USIM-F264-4E5-V19
  • Evaluation unit for ultrasonic transducers with eliptic sound field
  • Object detection in the near range
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Adjustable sound cone
  • Temperature compensation
  • Parameterizable input, e.g. for switching between two parameter sets

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  USIM-F264-4E5-V19

Ürün Açıklaması
Evaluation unit for the ultrasonic sensor system USi-industry with switching outputs (stand-alone device/main device)
General specifications
TypeUSi-industry evaluation unit
Sensing range10 ... 2500 mm
factory setting: 2000 mm
Adjustment range150 ... 2500 mm
Dead band0 ... 10 mm
Object sizetyp. ∅ 10 mm
Transducer frequencyapprox. 103 kHz
Response delay10 ... 20000 ms
factory setting: 150 ms
Sensor cycle time10 ... 200 ms
factory setting: 50 ms
Resolution1 mm
Target velocityaxial (max.): typ. 2 m/s (up to 2.5 m/s)
Repeat accuracy± 0.1 % of full-scale value
Temperature influenceautomatic or manual temperature compensation available ,
without temperature compensation: 0.17 %/K
Indicators/operating means
LED greensupply voltage/device status
LED yellowoutput states
ButtonTeach-in
Electrical specifications
Operating voltage9 ... 30 V DC
No-load supply current≤ 160 mA
Power consumption< 2.5 W
Time delay before availability≤ 300 ms
Interface
Interface typeUSB 2.0
Inputs
Input type2 inputs for ultrasonic transducers
1 digital input
Output 1
DesignationOUT 1.1
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 2
DesignationOUT 1.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 3
DesignationOUT 2.1
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Output 4
DesignationOUT 2.2
Output typeswitching output: PNP
Normally open/closed (NO/NC) parameterizable
Voltage drop≤ 2.5 V
Switching frequency0.05 Hz ... 100 Hz
Off-state current≤ 100 µA
Switching voltagemax. UB
Switching current100 mA
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 55011:2016-04

Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 70 °C (-22 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug
Degree of protectionIP65
Connectionfor power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m
for ultrasonic transducer: for each socket M8, 3-pin
for parameterization: socket Mini USB
Material
Housingdiecast aluminum
Mass250 g
Dimensions
Height35 mm
Width77 mm
Length98 mm

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: USIM-F264-4E5-V19

Function

The USi-industry ultrasonic sensor system is used in applications for object detection, area monitoring and distance measurement, for example on machines and systems. It is also used as an assistance system on mobile machines such as robots and driverless transport systems (AGVs) for collision avoidance both indoors and outdoors. The evaluation unit and the ultrasonic transducers to be connected to it are separate units. This enables a high degree of flexibility and a wide range of applications, so that even the smallest installation spaces can be used for ultrasonic sensor technology.

Up to 2 ultrasonic transducers with an elliptical sound field can be connected to the evaluation unit and freely positioned. Each ultrasonic transducer is assigned 2 outputs. The evaluation unit has a total of 4 outputs as well as 1 digital input and 1 synchronization line, all of which can be parameterized individually and independently of each other and integrated into a wide variety of applications. All types of USi-industry evaluation units are delivered as stand-alone devices and are therefore equivalent, regardless of whether they are main devices or secondary devices. Even without an electrical connection, several individual devices can be operated together without interference by means of special parameterization.

The digital input can be defined for one of the following functions, either

  • to switch off the outputs or

  • to switch to another parameter set without interruption or

  • for teaching in a changing environment during operation.

The teach-in button can be used to

  • teach in the environment of the detection area,

  • set the switching points,

  • log the second ultrasonic transducer on or off and

  • reset the evaluation unit to the factory settings.

Complete parameterization is conveniently carried out using the Device Type Manager (DTM) under PACTware via the integrated USB interface. These parameters define the inputs and outputs, switching points and operating modes, sensor and ultrasound-specific values as well as synchronization options and temperature compensation. as well as synchronization options and temperature compensation.

Informative Literature: USIM-F264-4E5-V19

Dil Seçeneği:
LiteratureDilDosya TipiDosya Boyutu
Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safetyENGPDF1781 KB
Application ReportENGPDF347 KB
Application ReportENGPDF333 KB

Product Documentation: USIM-F264-4E5-V19

Dil Seçeneği:
ManualsDilDosya TipiDosya Boyutu
Manual USi-industry USI*-F264-*-V19ENGPDF2461 KB

Approvals: USIM-F264-4E5-V19

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
Canada USA UL Ordinary LocationE87056, Vol.1, Sec.65ALLPDF285 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)DOC-7654ALLPDF69 KB
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F)DOC-7655ALLPDF67 KB

Software: USIM-F264-4E5-V19

Dil Seçeneği:
Device Description Files/DriversSürüm BilgileriDosya TipiDosya Boyutu
DTM for USI*-F264-* / DTM für USI*-F264-*V1.0.0.3 / 2024-10-08ZIP22284 KB
Software Tools
PACTware 6.X / PACTware 6.X6.1ZIP335938 KB

İlişkili Ürünler: USIM-F264-4E5-V19

Matching System Components
Ultrasonic transducer with 1.5 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 1.5 m cable lengthfa
Ultrasonic transducer with 3 m cable, exclusively for the USi ultrasonic sensor systems , Extremely compact dimensions, Elliptic sound cone, 3 m cable lengthfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Horizontal mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Vertical mounting bracket exclusively for ultrasonic transducers of the USi ultrasonic sensor systems, Screw mounting for simple installation, Robust constructionfa
Accessories
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Adapter cable USB-A plug straight to Mini-USB-B plug straight 4-pin, PVC cable black, shieldedfa
General Notes Relating to Pepperl+Fuchs Product Information
USi-safety Sensör Sistemi

USi-safety ultrasonik sensör sistemi, uğraştırıcı ve tozlu ortamlarda veya dış mekanlarda güvenlik uygulamaları için çığır açan yeni bir sistemdir.

Pepperl+Fuchs, ultrasonik sensörlerle ilgili bilgilerin yer aldığı çeşitli indirilebilir belgeler sunar.

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

© 2024 Tüm Hakları Saklıdır.

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.