Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
UB400-F77-E2-2M-Y70182612
| Ürün Açıklaması |
| Ultrasonic direct detection sensor |
| General specifications |
| Sensing range | 25 ... 400 mm |
| Adjustment range | 40 ... 400 mm |
| Dead band | 0 ... 25 mm |
| Standard target plate | 20 mm x 20 mm |
| Transducer frequency | approx. 300 kHz |
| Response delay | ≤ 75 ms |
| Limit data |
| Permissible cable length | max. 300 m |
| Indicators/operating means |
| LED yellow | switching state and flashing: Teach-In |
| Electrical specifications |
| Rated operating voltage | 24 V DC |
| Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 % |
| No-load supply current | ≤ 20 mA |
| Time delay before availability | ≤ 150 ms |
| Input |
| Input type | 1 program input |
| Level | low level : 0 ... 0.7 V (Teach-In active)
high level : UB or open input (Teach-In inactive) |
| Input impedance | 16 kΩ |
| Pulse length | ≥ 3 s |
| Output |
| Output type | 1 switch output PNP, NO |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Voltage drop | ≤ 2 V |
| Repeat accuracy | ± 1 mm |
| Switching frequency | 5 Hz |
| Range hysteresis | typ. 4 mm |
| Off-state current | ≤ 0.01 mA |
| Temperature influence | 0.17 %/K |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Shock resistance | 30 g , 11 ms period |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
| Mechanical specifications |
| Connection type | cable PUR , 2 m |
| Core cross section | 4 x 0.19 mm2 |
| Degree of protection | IP67 |
| Material | |
| Housing | Polycarbonate |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Installation position | any position |
| Mass | 51 g |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Dimensions | |
| Height | 31 mm |
| Width | 12 mm |
| Length | 23 mm |
| Factory settings |
| Output | Switching point: 400 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details:
UB400-F77-E2-2M-Y70182612
Product Documentation:
UB400-F77-E2-2M-Y70182612
Design / Simulation:
UB400-F77-E2-2M-Y70182612
Approvals:
UB400-F77-E2-2M-Y70182612
İlişkili Ürünler:
UB400-F77-E2-2M-Y70182612
| Accessories |
|
|
|
| Mounting aid for ML7 and ML8 series, Mounting bracketfa |
|
|
|
|
| Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Mounting aid, Wide range of mounting options, Mounting bracket with deviation mirror for stationary installations, Particularly suitable for conveyor systemsfa |
|
|
|
|
| Programming unit for ultrasonic sensors with two 4-pin M8 connectors, Programming unit for ultrasonic sensors of the UB*-F77* series, Simple, temporary integration into the sensor supply line using M8 plug cofa |
|
+90 216 577 2250