Fabrika Otomasyonu
Proses Otomasyonu
Endüstriyel Sensörler

Ultrasonic sensor UC500-18GS-IUEP-IO-V15

UC500-18GS-IUEP-IO-V15
  • IO-Link Interface for process data, parameterization and diagnosis
  • Programmable via DTM with PACTWARE
  • Programmable via IrDA (infrared interface)
  • Selectable sound lobe width
  • Synchronization options
  • Enhanced temperature compensation adjustable, stable measuring values already 2 min after switching on
  • Push-pull output
  • Analog output

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  UC500-18GS-IUEP-IO-V15

Ürün Açıklaması
Single head system
General specifications
Sensing range30 ... 500 mm
Adjustment range50 ... 500 mm
Dead band0 ... 30 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 300 kHz
Response delayminimum : 20 ms
factory setting: 40 ms
Sensor cycle time≥ 10 ms (factory setting) ;
programmable to 60 s
Temperature influencewith temperature compensation: ≤ ± 0.75% of the end value 10 min after switching on the sensor (factory setting)
with enhanced temperature compensation: ≤ ± 0.75% of the end value 2 min after switching on the sensor
without temperature compensation: 0.17 %/K
Memory
Non-volatile memoryEEPROM
Write cycles300000
Indicators/operating means
LED greensolid: power on
flashing: standby mode or IO-Link communication
LED yellowsolid: object in evaluation range
flashing: switch point programming, object detected
LED redsolid: error
flashing: switch point programming, object not detected
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 60 mA
Power consumption≤ 1000 mW
Time delay before availability≤ 300 ms
Interface 1
Interface typeIO-Link (via C/Q = Pin 4)
IO-Link revision1.1
Device profileSmart Sensor Profile 2
Process data width32 bit
Device ID0x300602 (3147266)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time3 ms
SIO mode supportyes
Compatible master port typeClass A
Class B (use 3-pole adapter or 3-wire cable)
Interface 2
Interface typeIrDA (infrared interface)
Modepoint-to-point connection
Transfer rate115.2 kBit/s
Maximum communication distance5 cm
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level2.5 V ... UB
Input impedance> 22 kΩ
Output currentcurrent source < 2.5 mA
Pulse length≥ 1 ms with external control, low active
Synchronization frequency
Common mode operation≤ 100 Hz
Multiplex operation≤ 71 Hz / n , n = number of sensors , n ≤ 10
Switching output
Output type1 push-pull output , short-circuit protected , reverse polarity protected
Rated operating current100 mA , short-circuit/overload protected
Switching frequencyfactory setting: 14 Hz
programmable to 33 Hz
Voltage drop≤ 2.5 V
Repeat accuracy≤ ± 0.1 % of full-scale value
Range hysteresis1 % of the adjusted operating range (default settings), programmable , min. 1 mm
Off-state current≤ 100 µA
Analog output
Output type1 analog output 0 (4) ... 20 mA or
1 analog output 0 ... 10 V
Resolutioncurrent output: evaluation range [mm]/3200 but ≥ 0.35 mm
voltage output: evaluation range [mm]/4000 but ≥ 0.35 mm
Deviation of the characteristic curve≤ ± 1 % of full-scale value
Repeat accuracy≤ ± 0.1 % of full-scale value
Load resistorcurrent output: ≤ 500 Ω
voltage output: ≥ 1000 Ω
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
EN 60947-5-7:2003
IEC 60947-5-7:2003
IEC 61131-9:2013
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M12 x 1 , 5-pin
Degree of protectionIP67
Material
Housingstainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Mass45 g
Tightening torque, fastening screwsmax. 30 Nm
Dimensions
Length90 mm
Diameter18 mm
Factory settings
Output 1near switch point: 50 mm
far switch point: 500 mm
Output mode: Window mode
output behavior: NO contact
Output 2near limit: 50 mm
far limit: 500 mm
Output mode: rising ramp
output behavior: Current output 4 mA ... 20 mA
Beam widthwide

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UC500-18GS-IUEP-IO-V15

Function

The UC*-18GS*IO* series ultrasonic sensor combines versatility with a compact housing. All functions can be conviently parameterized via IO-Link or IrDa interface.

A precise interference suppression and the adjustable sound beam width allow an optimal adaptation to your application.

The output configuration as well as the sound beam width can also be set directly on the sensor via programming buttons.

Process and service data can be transmitted via IO-Link, allowing easy integration into Industry 4.0 applications.

Informative Literature: UC500-18GS-IUEP-IO-V15

Dil Seçeneği:
LiteratureDilDosya TipiDosya Boyutu
Product Information - Ultrasonic Sensor Series UC18GS with IO-LinkENGPDF592 KB
Application Report - Adaptable level measurement with ultrasonic technologyENGPDF161 KB
Application Report - Fail-safe bottle detection in filling machinesENGPDF189 KB
Application Report - Measuring the Roller Diameter Accurately in Battery Cell ProductionENGPDF235 KB
Application Report - Reliable Detecting Foil Tears in Battery Cell ManufacturingENGPDF163 KB

Product Documentation: UC500-18GS-IUEP-IO-V15

Dil Seçeneği:
Product informationDilDosya TipiDosya Boyutu
Installation and user instructions for offline parameterization of IO-Link sensorsENGPDF1788 KB
Brief Instructions
Commissioning Instruction UC*-18GS-IUEP-IO-V15 / Inbetriebnahmeanleitung UC*-18GS-IUEP-IO-V15ALLPDF526 KB
Safety and Security Documentation
TalimatlarTURPDF148 KB
Manuals
Manual UC***-18GS Series Parameterization of Ultrasonic Sensors with IO-Link InterfaceENGPDF4179 KB
Parameter Information
Brief instructionsENGPDF735 KB

Design / Simulation: UC500-18GS-IUEP-IO-V15

Dil Seçeneği:
CADDilDosya TipiDosya Boyutu
CAD 3-D / CAD 3-DALLSTP3759 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ28 KB

Approvals: UC500-18GS-IUEP-IO-V15

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
Canada USA UL Ordinary LocationUL-US-2140156-4 / UL-CA-2133660-4ALLPDF284 KB
IO-Link Manufacturer DeclarationCERT-5878ALLPDF140 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4903AALLPDF81 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5211AALLPDF74 KB

Software: UC500-18GS-IUEP-IO-V15

Dil Seçeneği:
Device Description Files/DriversSürüm BilgileriDosya TipiDosya Boyutu
IODD file for UC-18GS series / IODD Datei fuer UC-18GS SerieV1.00.000 / 2020-10-30ZIP337 KB
DTM (Device Type Manager) Package for UC*-18GS* ultrasonic sensors / DTM (Device Type Manager) Package für UC*-18GS* UltraschallsensorenV1.1.0.1 / 30-09-2022ZIP12286 KB
DTM (Device Type Manager) Package for UC-PROG-IR-USB Programming Device / DTM (Device Type Manager) Package für UC-PROG-IR-USB ProgrammieradapterV1.1.0.1 / 31-10-2023ZIP9022 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.006 / 2022-07-10ZIP96138 KB
Pepperl+Fuchs PACTware Connection Wizard (Add-In for PACTware) / Pepperl+Fuchs PACTware Connection Wizard (Add-In für PACTware)10/2020ZIP320 KB

İlişkili Ürünler: UC500-18GS-IUEP-IO-V15

Accessories
Interface cable for parameterization of sensors with IrDA interfacefa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PVC cable greyfa
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa
Plastic mounting adapter, 18 mmfa
Mounting aidfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa
Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa
Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa
Female cordset single-ended M12 angled A-coded, 5-pin, PUR cable greyfa
EtherNet/IP IO-Link master with 8 inputs/outputsfa
PROFINET IO IO-Link master with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Ethernet IO-Link module with 8 inputs/outputsfa
Ethernet IO-Link module with 8 inputs/outputsfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
General Notes Relating to Pepperl+Fuchs Product Information
USi-safety Sensör Sistemi

USi-safety ultrasonik sensör sistemi, uğraştırıcı ve tozlu ortamlarda veya dış mekanlarda güvenlik uygulamaları için çığır açan yeni bir sistemdir.

Pepperl+Fuchs, ultrasonik sensörlerle ilgili bilgilerin yer aldığı çeşitli indirilebilir belgeler sunar.

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

© 2024 Tüm Hakları Saklıdır.

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.