Fabrika Otomasyonu
Proses Otomasyonu

Adapter plate MHV-BT-F25/F31

MHV-BT-F25/F31
  • Simple mounting
  • All-in-one stainless steel solution
  • Minimal friction due to ball bearing
  • Conforming to standards

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  MHV-BT-F25/F31

Ürün Açıklaması
Adapter plate for dual sensors -F25/-F31 series
General specifications
Suitable sensors and Dual sensors, -F25 series with actuator BT32...
Dual sensors, -F25K series with actuator BT32...
Dual sensors, -F31 series with actuator BT65...
Standard conformity
StandardsVDI / VDE 3845
DIN EN ISO 5211
Mechanical specifications
Shaft diameter16 mm
Shaft height20 mm
Mounting hole patternsensor: 30 x 80 mm, M5 screw
mounting bracket: 4 x 50 mm, M6 screw
Materialstainless steel 1.4301 / AISI 304 for plates and sheet metal bending parts
Stainless steel 1.4305 / AISI 303 for shaft
Mounting materialsstainless steel socket cap head screws 4 x M6 x 8 mm
Mass300 g
Dimensions
Height53.5 mm
Width65 mm
Length101.5 mm

Classifications

SystemClasscode
ECLASS 13.027273701
ECLASS 12.027273701
ECLASS 11.027273792
ECLASS 10.0.127273792
ECLASS 9.027273792
ECLASS 8.027279202
ECLASS 5.127279202
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC003015
UNSPSC 12.131162301

Details: MHV-BT-F25/F31

Product Documentation: MHV-BT-F25/F31

Dil Seçeneği:
Brief InstructionsDilDosya TipiDosya Boyutu
Brief Instructions - Assembly of Fitting, Adapter Plate, Mounting Set, Double Sensor, ActuatorENGPDF272 KB

Design / Simulation: MHV-BT-F25/F31

Dil Seçeneği:
CADDilDosya TipiDosya Boyutu
CAD 3-D / CAD 3-DALLSTP1416 KB
CAD Portal / CAD PortalALLLINK---

İlişkili Ürünler: MHV-BT-F25/F31

Accessory of
Battery operated, Data transfer via LoRaWAN, LoRaWAN downlink channel for querying and adjusting parameter values, Frequency range: 863 ... 870 MHz (Europe)
fa
Matching System Components
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
fa
Material: stainless steel 1.4301 / AISI 304fa
fa
Matching System Components
Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021X, Equipment protection level Mb: IECEx TUN 17.0021Xfa
Valve position detection, Switching function: 2 x normally open (NO), Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 3-wire, Construction type: Dual sensor, Series: Dual sensor, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: PBT, Degree of protection: IP67fa
Valve position detection, Switching function: 2 x normally open (NO), Output type: Two-wire with minimum off-state current, Installation: flush mountable, Output polarity: DC, Output type: 2x 2-wire, Construction type: Dual sensor, Series: Dual sensor, Operating voltage: 5 ... 30 V DC, Type of voltage: DC, Connection (system side): screw terminal , M20 x 1.5 cable gland, Housing material: PBT, Degree of protection: IP67fa
Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021Xfa
Extended temperature range, Valve position detection, Suitable for 2:1 technology, Switching function: 2 x normally closed (NC), Output type: NAMUR, Installation: flush mountable, Output type: 2-wire, Construction type: Dual sensor, Series: Dual sensor, Suitable for 2:1 technology, Safety Integrity Level (SIL): SIL 2, Type of voltage: DC, Equipment protection level Ga: IECEx TUN 17.0021X, Equipment protection level Gb: IECEx TUN 17.0021X, Equipment protection level Da: IECEx TUN 17.0021Xfa
fa
fa
fa
fa
fa