Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
ENI90IL-H
| General specifications |
| Detection type | photoelectric sampling |
| Linearity error | ± 0.025 ° |
| Pulse count | max. 2048 |
| Functional safety related parameters |
| MTTFd | 435 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Electrical specifications |
| Operating voltage | 4.75 ... 30 V DC |
| No-load supply current | max. 50 mA |
| Output |
| Output type | push-pull or RS422 (universal output driver, output level depending on input voltage) |
| Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected |
| Output frequency | max. 400 kHz |
| Rise time | 300 ns |
| Phase position A to B | 90 ° ± 9 ° electrical |
| Duty cycle | 1/2 ± 10 % |
| Connection |
| Cable | ∅6 mm, 4 x 2 x 0.14 mm2 |
| Standard conformity |
| Degree of protection | DIN EN 60529, IP65 |
| Climatic testing | DIN EN 60068-2-78 , no moisture condensation |
| Emitted interference | EN IEC 61000-6-4:2019 |
| Noise immunity | EN IEC 61000-6-2:2019 |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
| Approvals and certificates |
| UL approval | E223176 , cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure , if UL marking is marked on the product. For use in NFPA 79 Applications only. adapters providing field wiring on request |
| Maximum permissible ambient temperature | max. 80 °C (max. 176 °F) |
| Ambient conditions |
| Operating temperature | -20 ... 70 °C (-4 ... 158 °F) , cable, fixed installation
-5 ... 70 °C (23 ... 158 °F) , movable cable |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Material | |
| Housing | aluminum, blank |
| Flange | aluminum, blank |
| Shaft | anodized aluminum |
| Mass | < 700 g without cable |
| Rotational speed | max. 3000 min -1 |
| Starting torque | ≤ 0.1 Nm |
| Shaft load | |
| Axial | ≤ 50 N |
| Radial | ≤ 100 N |
| Dimensions | |
| Length | 55 mm |
| Diameter | 93 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270501 |
| ECLASS 12.0 | 27270501 |
| ECLASS 11.0 | 27270501 |
| ECLASS 10.0.1 | 27270501 |
| ECLASS 9.0 | 27270501 |
| ECLASS 8.0 | 27270501 |
| ECLASS 5.1 | 27270501 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details:
ENI90IL-H
Product Documentation:
ENI90IL-H
Design / Simulation:
ENI90IL-H
İlişkili Ürünler:
ENI90IL-H
| Accessories |
|
|
|
| Spring sheet individual shortfa |
|
+90 216 577 2250