Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Ürün Açıklaması |
---|
Temperature Sensor for 6000 Series Purge system |
General specifications | ||
---|---|---|
Series | 6000 Series | |
System | Type X Purge ; Ex pxb Purge | |
Electrical specifications | ||
Connection | ||
Power | + , - , sensors | |
Rated voltage | 5.5 V DC | |
Rated current | max. 10 mA | |
Open loop voltage | 9.6 V | |
Distance | 3 m from 6000 control unit 3 m from 6000-TEMP-01 |
|
Ambient conditions | ||
Ambient temperature | -20 ... 100 °C (-4 ... 212 °F) | |
Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
Relative humidity | < 95 % non-condensing | |
Vibration resistance | 1 g / 58 ... 150 Hz | |
Impact resistance | 15 g, 11 ms | |
Mechanical specifications | ||
Housing material | Ryton BR III BL | |
Degree of protection | IP65 | |
Cable | Gray PVC | |
Diameter | 5.03 mm2 | |
Wire gauge | 22 AWG | |
Mass | approx. 110 g | |
Dimensions | 50 mm x 25 mm x 5 mm | |
Mounting | panel or DIN rail mounting | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | UL/Demko 07 ATEX 0705753X | |
International approvals | ||
UL approval | File no: E184741 | |
cULus | File no: E184741 | |
IECEx approval | IECEx UL 08.0003X |
System | Classcode |
---|---|
ECLASS 13.0 | 27180591 |
ECLASS 12.0 | 27180591 |
ECLASS 11.0 | 27180591 |
ECLASS 10.0.1 | 27299090 |
ECLASS 9.0 | 27299209 |
ECLASS 8.0 | 27299209 |
ECLASS 5.1 | 40050501 |
ETIM 9.0 | EC000243 |
ETIM 8.0 | EC000243 |
ETIM 7.0 | EC000243 |
ETIM 6.0 | EC000243 |
ETIM 5.0 | EC000243 |
UNSPSC 12.1 | 39121303 |
The 6000-TSEN-01 temperature sensor is designed to be used with the 6000-TEMP-01 temperature hub and the 6000 Series purge and pressurization system.
Up to three (3) 6000-TSEN-01 temperature sensors can be mounted throughout the purged enclosure and connected to one (1) temperature hub. Multiple sensors can provide maximum or average enclosure temperature.
The 6000-TSEN-01 can only be used with the 6000-TEMP-01 temperature hub and cannot be used as a standalone device. This unit can be mounted in Zone 1 & 21 and Class I & II / Division 1 locations.
Note: The 6000-TSEN-01 is not required for a single temperature point as one (1) is included within the 6000-TEMP-01 device.
Safety and Security Documentation | Dil | Dosya Tipi | Dosya Boyutu |
---|---|---|---|
Instruction manual | ENG | 174 KB |
Certificates | Sertifika No. | Dil | Dosya Tipi | Dosya Boyutu |
---|---|---|---|---|
ATEX Certificate | DEMKO 07 ATEX 0705753X | ALL | 360 KB | |
Brasil TUV Rheinland Brazil | TÜV 22.1421X | ALL | 1291 KB | |
China SITIIAS CCC Ex Certificate | 2020322304003056 (Katy, TX USA) | ALL | 5433 KB | |
IECEx Certificate of Conformity | IECEx UL 08.0003X | ALL | LINK | --- |
PESO (India) CCOE | A/P/HQ/MH/104/4757 (P383926) | ALL | 103 KB | |
UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | ALL | 741 KB | |
Control Drawings | ||||
Control drawing UL / Control drawing UL | ALL | 711 KB | ||
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B066D | ALL | 162 KB |