Signal Converter K23-SSI/USB/25B-C

Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface
USB interface for configuring and reading
Extremely short conversion times
User-definable, non-linear characteristic curve with 24 interpolation points
Auxiliary voltage output 5 V DC and 24 V DC for rotary encoder supply

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Software

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler K23-SSI/USB/25B-C

Ürün Açıklaması
SSI/parallel signal converter

Functional safety related parameters
MTBF		56.4 a (continuous operation at 60°C)
Indicators/operating means
LED green		status display
Electrical specifications
Fusing		External: T 0.5 A Reverse polarity protection
Operating voltage		10 ... 30 V DC
Operating current		approx. 30 mA (Unladen)
Supply		Rotary encoder: 5 V DC and 24 V DC (approx. 1 V less than U_B) Max. 250 mA
Interface 1
Interface type		Mini USB
Transfer rate		115,200 baud
Flow control		8none1
Interface 2
Connection of		Clock, /Clock, Data, /Data
Interface type		SSI Managing or managed operations
Frequency range		max. 1 MHz
Load current		max. 3 mA / R_i > 10 kΩ / 10 pF
Resolution		10 bits … 32 bits
Data format		Binary code or gray code
Interface 3
Interface type		Start/Stop RS422 input: 1 x (Start_Stop, /Start_Stop); 1x (ext. Init_In, ext. /Init_In) RS422 output: 1 x (Init_Out, /Init_Out)
Resolution		Depends on the speed of the encoder wave guide
Frequency		Init pulse width: 1 s … 9 µs (adjustable) Init pulse frequency: 62.5 ... 5000 Hz (adjustable) Time measured via pulse frequencies: 48 MHz
Input 1
Input type		Incremental
Input format		RS422, TTL, HTL differential, HTL PNP, or HTL NPN
Connection		Lanes: A, /A, B, /B
Input frequency		RS422: max. 1 MHz (RS422 differential signal > 0.5 V) HTL differential: max. 500 kHz (HTL differential signal > 2 V) TTL/HTL (PNP/NPN): max. 250 kHz
Load current		Max. 6 mA/Ri > 5 kΩ/10 pF
Input 2
Input type		3 x Control input
Input format		HTL, PNP (low: 0 V … 3 V, high: 9 V … 30 V)
Input frequency		max. 10 kHz
Load current		Max. 2 mA/Ri > 15 kΩ/470 pF
Output
Number/Type		Parallel
Signal		Push/pull
Output current		Gray-Code, Binary-Code, BCD-Code
Resolution		25 bit
Contact loading		max. 35 V on COM+ (Short-circuit resistance up to 27 V) max. 20 kA at 24 V (R_i = 600 Ω)
Sampling time		0.001 s … 9.999 s (adjustable)
Ambient conditions
Operating temperature		-20 ... 60 °C (-4 ... 140 °F) (noncondensing)
Storage temperature		-25 ... 75 °C (-13 ... 167 °F) (noncondensing)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals 1.5 mm², AWG 16 25-pin Sub-D socket
Material
	Housing	plastic
Installation		on 35 mm DIN mounting rail acc. to EN 60715:2001
Mass		approx. 100 g
Dimensions
	Height	102 mm
	Width	23 mm
	Depth	102 mm

Classifications

System	Classcode
ECLASS 13.0	27210904
ECLASS 12.0	27210904
ECLASS 11.0	27210904
ECLASS 10.0.1	27210904
ECLASS 9.0	27210904
ECLASS 8.0	27210904
ECLASS 5.1	27210904
ETIM 9.0	EC002918
ETIM 8.0	EC002918
ETIM 7.0	EC002918
ETIM 6.0	EC002918
ETIM 5.0	EC002475
UNSPSC 12.1	39121007

Details: K23-SSI/USB/25B-C

Function

The K23-SSI/USB/25B-C is a small and inexpensive, but extremely powerful signal converter for industrial applications, where SSI telegrams from sensors or encoders are converted into parallel signals.

The device is contained in a compact housing for rail mounting.

The device features

screw terminals
a USB connection
a 25-pin Sub-D socket
3 user-configurable digital control inputs

Applicable encoders and sensors

Encoders and all comparable sensors with SSI interface (10 ... 32 bit binary or Gray code), either in leading mode (the device generates the clock signal itself), or in guided mode (the device switches to an existing clock signal).

Incremental input signals are processed in frequency converter mode or counter mode. In start-stop mode, transonic or magnetostrictive displacement sensors can be connected.

Product Documentation: K23-SSI/USB/25B-C

Manuals	Dil	Dosya Tipi	Dosya Boyutu
Manual K23-SSI/USB/25B-C	ENG	PDF	3094 KB

Design / Simulation: K23-SSI/USB/25B-C

CAD	Dil	Dosya Tipi	Dosya Boyutu
CAD 3-D / CAD 3-D	ALL	STP	775 KB

Approvals: K23-SSI/USB/25B-C

Declaration of Conformity	Sertifika No.	Dil	Dosya Tipi	Dosya Boyutu
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4965	ALL	PDF	114 KB

Software: K23-SSI/USB/25B-C

Software Tools	Sürüm Bilgileri	Dosya Tipi	Dosya Boyutu
software tool to configure K23-SSI devices and TC-LCDC displays / Parametrier- und Konfigurationssoftware für K23-SSI und TC-LCDC	08/2021	ZIP	85353 KB

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.