Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler
V1-WV4A-2M-PP-H1
| Ürün Açıklaması |
| Single-ended female cordset, M12, V4A stainless steel, hygienic design, 4-pin, PP cable |
| General specifications |
| Number of pins | 4 |
| Connection 1 | socket |
| Construction type 1 | angled |
| Threading 1 | M12 |
| Connection 2 | cable end |
| Electrical specifications |
| Operating voltage | max. 250 V AC/DC |
| Operating current | max. 4 A |
| Compliance with standards and directives |
| Standard conformity | |
| Degree of protection | EN 60529 |
| Standards | IEC 61076-2-101 |
| Halogen-free | IEC 60754-1 |
| Temperature resistance | DIN EN 60811-1-4 |
| Material | FDA-compliant in accordance with FDA 21 CFR 177.2600 |
| Ambient conditions |
| Ambient temperature | cable, movable installation: -25 ... 105 °C (-13 ... 221 °F)
cable, fixed installation: -40 ... 105 °C (-40 ... 221 °F) |
| Pollution degree | 3 |
| Mechanical specifications |
| Contact elements | spring-loaded contact socket |
| Degree of protection | IP67 / IP68 / IP69 |
| Material | |
| Contacts | CuSn |
| Contact surface | Ni/Au |
| Body | PP |
| Cable | PP-EPDM |
| Slotted nut | stainless steel V4A |
| Seal | FKM |
| Core insulation | PP |
| Temperature resistance | Cold bending-resistant and cold impact-resistant up to -40 °C (-40 °F) |
| Cable | extra-fine wire, flexible |
| Sheath diameter | ∅ 4.7 mm |
| Bending radius | > 10 x cable diameter, movable installation
> 5 x cable diameter, fixed installation |
| Color | grey |
| Cores | 4 x 0.34 mm2 |
| Conductor construction | 42 x 0.1 mm ∅ |
| Length | 2 m |
| Drag chain suitability | |
| Drag chain cycles | min. 4000000 |
| Motion velocity | max. 3 m/s |
| Traverse distance | 10 m |
| Acceleration | max. 10 m/s2 |
| Torsion cycles | min. 4000000 |
| Torsional stress | ± 270 °/m |
| Mass | 72 g |
| Tightening torque, cable gland | 0.4 ... 0.6 Nm |
| Mating cycles | min. 100 |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27060311 |
| ECLASS 12.0 | 27060311 |
| ECLASS 11.0 | 27060311 |
| ECLASS 10.0.1 | 27060311 |
| ECLASS 9.0 | 27060311 |
| ECLASS 8.0 | 27279218 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC001855 |
| ETIM 8.0 | EC001855 |
| ETIM 7.0 | EC001855 |
| ETIM 6.0 | EC001855 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details:
V1-WV4A-2M-PP-H1
Approvals:
V1-WV4A-2M-PP-H1
İlişkili Ürünler:
V1-WV4A-2M-PP-H1
| Accessory of |
|
|
|
| Single head system, Short design, 40 mm, Analog output 4 mA ... 20 mA, Measuring window adjustable, Series: -18GM, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Output type: 1 analog output 4 ... 20 mA, short-circuit/overload protected, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 4-pinfa |
|
|
|
|
| High chemical resistance through PTFE coated transducer surface, Stainless Steel enclosure, 1 switch output, Series: -12GM, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Output type: 1 switch output PNP Normally open/closed , programmable, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 4-pinfa |
|
|
|
|
|
| Single head system, High chemical resistance through PTFE coated transducer surface, Stainless Steel enclosure, Analog output 4 mA ... 20 mA, Series: -12GM, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Output type: 1 analog output 4 ... 20 mA, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 4-pinfa |
|
| Accessories |
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| Plug-in attachment for M12 with hex stainless steel knurled nutfa |
|
+90 216 577 2250