Singleturn absolute rotary encoder ASS58-0

Industrial standard housing ∅58 mm
16 Bit singleturn
Data transfer up to 2 MBaud
Optically isolated RS 422 interface
Recessed hollow shaft
Zero-set function

Technical Data
Details
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler ASS58-0

General specifications
Detection type		photoelectric sampling
Device type		Singleturn absolute rotary encoder
Electrical specifications
Operating voltage		4.5 ... 30 V DC (SSI, SSI + RS422) ; 10 ... 30 V DC (SSI + Push/Pull)
No-load supply current		max. 180 mA
Time delay before availability		< 250 ms
Linearity		± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output code		Gray code, binary code
Code course (counting direction)		cw descending (clockwise rotation, code course descending)
Interface
Interface type		SSI ; SSI + incremental track
Monoflop time		20 ± 10 µs
Resolution
	Single turn	up to 16 Bit
	Overall resolution	up to 16 Bit
Transfer rate		0.1 ... 2 MBit/s
Voltage drop		U_B - 2.5 V
Standard conformity		RS 422
Input 1
Input type		Selection of counting direction (cw/ccw)
Signal voltage
	High	4.5 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Switch-on delay		< 10 ms
Input 2
Input type		zero-set (PRESET 1)
Signal voltage
	High	4.5 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 100 ms
Switch-on delay		< 10 ms
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin
Cable		∅7 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65 (without shaft seal) ; DIN EN 60529, IP66/IP67 (with shaft seal)
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		DIN EN 61000-6-4
Noise immunity		DIN EN 61000-6-2
Shock resistance		DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Combination 1	housing: powder coated aluminum flange: aluminum shaft: stainless steel
	Combination 2 (Inox)	housing: stainless steel flange: stainless steel shaft: stainless steel
Mass		approx. 460 g (combination 1) approx. 800 g (combination 2)
Rotational speed		max. 12000 min ^-1
Moment of inertia		50 gcm²
Starting torque		< 5 Ncm
Shaft load
	Angle offset	± 0.9 °
	Axial offset	static: ± 0.3 mm, dynamic: ± 0.1 mm
	Radial offset	static: ± 0.5 mm, dynamic: ± 0.2 mm

Classifications

System	Classcode
ECLASS 13.0	27270502
ECLASS 12.0	27270502
ECLASS 11.0	27270502
ECLASS 10.0.1	27270502
ECLASS 9.0	27270502
ECLASS 8.0	27270502
ECLASS 5.1	27270502
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: ASS58-0

Function

This singleturn absolute encoder with modern fast technology transmits a position value corresponding to the shaft setting via the SSI interface (Synchronous Serial Interface). The resolution of the ASS58 is maximum 65536 steps per revolution.

The devices of the ASS58 series are equipped with a microcontroller.

The control module sends a clock bundle to the absolute encoder to obtain position data. The rotary encoder then sends the position data synchronous to the cycles of the control module. It is possible to select the following items with function inputs the counting direction and the zero-set function (preset value).

The absolute encoder is mounted directly onto the application shaft, without any coupling. Rotation of the absolute encoder is prevented by a torque rest.

The electrical connection is made by a 12-pin round plug connector. It is also possible to obtain a version with a 1 m cable connector.

Approvals: ASS58-0

Certificates	Sertifika No.	Dil	Dosya Tipi	Dosya Boyutu
US CA UL	CoC 20190913-E223176 RptRef E223176-20081013	ALL	PDF	280 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1952A	ALL	PDF	74 KB

İlişkili Ürünler: ASS58-0

Accessories

	9416 Female cordset
	Female cordsetfa

	9416-*M-12P-AVM Female connector
	Female cordset, M23, 12-pin, PVC cable, 8-core , Immunity to vibration, with mechanical latching, Gold-plated and machined contacts, Shield attached to connector housingfa

	ACC-PACK-ABS-_S_58 ø15 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 15 mmfa

	ACC-PACK-ABS-_S_58 ø14 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 14 mmfa

	ACC-PACK-ABS-_S_58 ø12 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 12 mmfa

	ACC-PACK-ABS-_S_58 ø10 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 10 mmfa

General Notes Relating to Pepperl+Fuchs Product Information

ENA58IL Manyetik Döner Enkoder – Endüstri Standardı Döner Enkoderlerin Yeni Referans Noktasını Keşfedin.

Manyetik Hassasiyet. Koşullar Ne Olursa Olsun. - Pepperl+Fuchs Manyetik Enkoder Teknolojisi

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.