6500 Series Vent EPV-6500-*-*
- A selection of vents for specific applications
- Intrinsically safe operation
- Continuous flow vents for precise flow rates for dilution applications
- Continuous flow measurement for dilution, purging, and pressurization
- Low leakage rate vents for air or inert gas conversation
- High flow rate vents for fast, large enclosure systems
- Universal mounting in any orientation including most of the unit inside the enclosure
- Maximum enclosure size 12.75 cu.meters (450 cu.ft.)
- ATEX/IECEx Zone 1/21 certified for Ex pyb and Ex pxb
- Up to SIL 2 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Tam veri sayfasını PDF olarak indirin:
Veri sayfası alıntısı: Teknik veriler EPV-6500-*-*
| Ürün Açıklaması |
|---|
| Enclosure protection vent for 6500 series type Ex pyb Ex pxb purge and pressurization system |
| General specifications | ||
|---|---|---|
| Series | 6500 |
|
| System | Ex pxb Purge , Ex pyb Purge | |
| Number of volume exchanges | 5 to 19 |
|
| Hazardous environment | gas, dust, gas and dust | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 |
|
| Electrical specifications | ||
| Connection | ||
| Signal | BUS back to the 6500 control unit |
|
| Connection | M12 connector, 4-pin, cable length 5 meters (provided) | |
| Cable length | max. 60 meters at 50 pf/ft and 0.2 µH/ft | |
| Indicators/settings | ||
| LED indication | POWER: green | |
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Maximum pressure | depends on the integrity of the enclosure (strength) vent pressure range: 0 to 25 mbar (0 to 9.9 in wc) |
|
| Safe pressure | Gas: 0.82 mbar (0.33 in wc) Dust: 0.82 mbar (0.33 in wc) Gas+Dust: 0.82 mbar (0.33 in wc) |
|
| Purge flow rate | See graphs Readout on display is in increments of 28 l/min (1 scfm). Minimum and maximum reading depends on type of vent and supply pressure. EPV-6500-*-07, 08 will readout continuous flow. |
|
| Purge flow and enclosure pressure rate | See graphs Readout on display is in increments of 28 l/min (1 scfm). Minimum and maximum reading depends on type of vent and supply pressure. EPV-6500-*-07, 08 will readout continuous flow. |
|
| Flow rate for leakage compensation | EPV-6500....-01: 593 l/hr (21 scfh) @ 0.63 mbar (0.25 in wc) 1640 l/hr (58 scfh) @ 1.9mbar (0.75 in wc) EPV-6500....-03: 395 l/hr (14 scfh) @ 0.63 mbar (0.25 in wc) 961 l/hr (34 scfh) @ 1.9 mbar (0.75 in wc) EPV-6500....-05: 260 l/hr (9.2 scfh) @ 0.63 mbar (0.25 in wc) 622 l/hr (22 scfh) @ 1.9 mbar (0.75 in wc) EPV-6500....-07: n/a EPV-6500....-08: n/a |
|
| Breaking pressure | EPV-6500-...-01: 2.0 mbar (0.8" wc) EPV-6500-...-03: 3.5 mbar (1.4" wc) EPV-6500-...-05: 3.8 mbar (1.5" wc) EPV-6500-...-07: n/a EPV-6500-...-08: n/a |
|
| Conformity | ||
| Degree of protection | EN 60529 |
|
| Shock resistance | EN 60068-2 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
|
| Relative humidity | 5 ... 90 %, non-condensing |
|
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes |
|
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Degree of protection | IP66 rated sealing washer and electronics housing |
|
| Material | EPV-6500-AA-.... Cap: marine grade 5052 anodized aluminum, marine grade 6061T6 anodized aluminum EPV-6500-SS-.... Cap: 316L (UNS S31603) stainless steel; Body: marine grade 6061T6 anodized aluminum |
|
| Spark arrestor | 304 (UNS S30400) stainless steel | |
| Installation | - any orientation to enclosure - not gravity dependent - internal and external mounting possible |
|
| Mass | approx. 1.4 kg (3.1 lb) |
|
| Dimensions | 127 x 146 x 83 mm (5.0" x 5.8" x 3.3") | |
| Mounting | 1 ½" NPT knockout (50.8mm (2") hole) with seal nut included |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | DEMKO 15 ATEX 1622X | |
| Marking |  II 2G Ex ib [pxb Gb] IIC T4 Gb II 2D Ex ib [pxb Db] IIIC T135 °C Db II 2G Ex ib [pyb Gb] IIC T4 Gb II 2D Ex ib [pyb Db] IIIC T135 °C Db |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 , EN 60079-2:2014 , EN 60079-11:2012 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx UL 15.0147X | |
| IECEx marking | Ex ib [pxb Gb] IIC T4 Gb Ex ib [pxb Db] IIIC T135 °C Db Ex ib [pyb Gb] IIC T4 Gb Ex ib [pyb Db] IIIC T135 °C Db EPV-6000: -20 °C ≤ Tamb ≤ 60 °C EPV-6500: -20 °C ≤ Tamb ≤ 70 °C |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27292190 |
| ECLASS 9.0 | 27292190 |
| ECLASS 8.0 | 27292190 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6500-*-*
Function
EPV-6500-*-* enclosure protection vents provide pressure relief to pressurized enclosures and pressure and flow information to 6500 series control units. The vents are intrinsically safe when used in conjunction with a 6500 control unit. Vent models are available for standard applications or continuous flow dilution applications that require precise flow measurement. For a streamlined enclosure design, the vent can be mounted in any orientation and can be mounted inside a pressurized enclosure with just the vent cap outside of the enclosure. EPV-6500-SS-* models include reference pressure tubing and hardware for internal mounting.
Informative Literature: EPV-6500-*-*
| Literature | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Application Report - Hydrogen Analysis with Reliable Explosion Protection | ENG | 253 KB | |
| Application Report - Label Printer Solution for Zone 1/21 and Zone 2/22 Applications | ENG | 135 KB |
Product Documentation: EPV-6500-*-*
| Safety and Security Documentation | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| Instruction manual | ENG | 168 KB | |
| Manuals | |||
| Manual | ENG | 7378 KB | |
Design / Simulation: EPV-6500-*-*
| CAD | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|
| 3D drawing for EPV-6000 and EPV-6500 Vent / 3-D-Modell für EPV-6000 und EPV-6500 Druckwächter | ALL | STP | 7814 KB |
Approvals: EPV-6500-*-*
| Certificates | Sertifika No. | Dil | Dosya Tipi | Dosya Boyutu |
|---|---|---|---|---|
| ATEX Certificate | DEMKO 15 ATEX 1622X Rev. 1 | ALL | 256 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002499 (Katy, TX USA) | ALL | 1041 KB | |
| IECEx Certificate of Conformity | IECEx UL 15.0147X | ALL | LINK | --- |
| Korea KOSHA | 16-AV4BO-0186X | ALL | 1013 KB | |
| UK-Type Examination Certificate | UL21UKEX2016X | ALL | 231 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B067C | ALL | 145 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0G1A | ALL | 157 KB | |
İlişkili Ürünler: EPV-6500-*-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!
Pepperl+Fuchs’ new 6500 purge controller app delivers real-time monitoring and configuration for the 6500 series purge and pressurization system. Download the app for iOS or Android devices now …
Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
+90 216 577 2250
Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.