Fabrika Otomasyonu
Proses Otomasyonu
Patlama Koruması

Ultrasonic Level Sensor LUC-M40

LUC-M40
  • Device for non-contact level measurement
  • Measuring range up to 10 m in fluids
  • Measuring range up to 5 m in bulk materials
  • Quick and simple commissioning via menu-guided onsite operation with four-line display
  • Optional remote display and operation (up to 20 m from transmitter)
  • Integrated temperature sensor for automatic correction of the temperature dependent sound velocity

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  LUC-M40

General specifications
Measuring methodThe sensor of the device transmits ultrasonic pulses in the direction of the product surface. There, the ultrasonic pulses are reflected back and received by the sensor. The device measures the time between pulse transmission and reception. The instrument uses the time (and the velocity of sound) to calculate the distance between the sensor membrane and the product surface. As the device knows the empty distance from a user entry, the device calculate the level.
Equipment architecture4 ... 20 mA output with HART protocol
Construction typecompact device
SeriesLUC-M40
Supply
Connection2-wire , 4 ... 20 mA , HART protocol , 14 ... 30 V DC
Rated voltage14 ... 30 V DC , 8 V DC at 20 mA
Ripple47 ... 125 Hz , Upp = 200 mV (measured at 500 Ω)
Noise0.5 ... 10 kHz , Urms = 2.2 mV (measured at 500 Ω)
Current consumption3.6 ... 22 mA
Power consumption51 ... 800 mW
Input
Measured variabledistance between the sensor membrane and the product surface
using the linearization function, the device calculate
- level in any units
- volume in any units
- flow across measuring weirs or open channels in any units
Measuring rangemax. 10 m (32.8 foot) in fluids
max. 5 m (16.4 foot) in bulk materials
Operating frequencyapprox. 42 kHz
Blocking distance0.4 m
Output
Loadmin. 250 Ω for HART communication
LinearityThe linearization function of the device allows conversion of the measured value into any unit of length or volume. In open channels or measuring weirs, also a flow linearization is possible (calculation of the flow from the measured level).
Output signal4 ... 20 mA with HART protocol
Output damping0 ... 255 s , freely selectable
Signal on alarmerror information can be accessed via the following interfaces:
- on-site display (error symbol, error code and plain text description)
- current output (configurable)
- digital interface
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
Directive 2014/35/EUEN 61010-1:2001
Conformity
Electromagnetic compatibilityNE 21
Degree of protectionIEC 60529:2001
Vibration resistanceEN 60068-2-64
Climate classEN 60068-2-38 (test Z/AD) DIN/IEC 68 T2-30Db
Resistance to alternating temperature cyclesEN 60068-2-14
Measurement accuracy
Reaction timemin. 2 s
Reference operating conditionstemperature = 20 °C (68 °F)
pressure = 1013 mbarabs
humidity = 50 %
ideal reflective surface (e. g. calm, smooth fluid surface)
no interference reflections within signal beam
set application parameters:
- tank shape = flat ceiling
- medium property = liquid
- process conditions = calm surface
Measured value resolution2 mm
Measuring frequencymax. 0.5 Hz
Maximum measured errortypical specifications for reference operating conditions (include linearity, repeatability, and hysteresis):
± 4 mm (0.16 inch) or 0.2% of set measuring range (empty calibration)1)
1)
whichever is greater
Operating conditions
Installation conditionssee technical information (TI)
Ambient conditions
Resistance to alternating temperature cyclesNb test: +80 °C/- 40 °C (353 K/233 K), 1 K/min, 100 cycles
Vibration resistance20 ... 2000 Hz, 1 (m/s2)2/Hz; 3 x 100 min
Process conditions
Process temperature-40 ... 80 °C (-40 ... 176 °F)
Process pressure (static pressure)0.7 ... 2.5 bar (10.2 ... 36.3 psi) , absolute pressure
Ambient conditions
Ambient temperature-40 ... 80 °C (-40 ... 176 °F)
see technical information (TI)
Storage temperature-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Degree of protectionwith closed housing, tested according to
- IP68, NEMA 6P (24 h at 1.83 m under water surface)
- IP66, NEMA 4X
with open housing: IP20, NEMA 1 (also ingress protection of the display)
Connectioncable gland M20x1.5
cable gland NPT1/2
cable gland G1/2
Materialmaterial in contact with process: sensor PVDF, seal Viton or EPDM, flange PP, PVDF or stainless steel 1.4535/316L
housing: aluminum, seawater resistant, chromated, powder-coated
cover:
- aluminum, for version without on-site display
- inspection glass for version with on-site display
Mass3 kg
Dimensionssee section dimensions
Process connection- cylindrical thread G1-1/2B, G2B to DIN/ISO 228/1
- conical thread NPT1-1/2, NPT2 to ANSI B 1.20.1
- flanges to EN 1092-1 from DN80, to ANSI B 16.5 from 3 inch, to JIS B 2238 (RF) from DN80
- mounting bracket LUC-Z17
Data for application in connection with hazardous areas
EU-type examination certificatesee instruction manuals (SI)
Directive conformity
Directive 2014/34/EUEN 60079-0:2006 , EN 60079-1:2004 , EN 60079-7:2003 , EN 60079-11:2007 , EN 60079-18:2005 , EN 60079-26:2004 , EN 60079-27:2007 , EN 61241-0:2006 , EN 61241-1:2004+C11:2006
Mechanical construction
Construction typehousing design:
- F12 housing with sealed terminal compartment for standard or EEx ia applications
- T12 housing with separate terminal compartment and flameproof encapsulation
cover:
- version without on-site display
- version with on-site display (transparent cover), this version cannot be supplied together with the ATEX II 1/2D certificate
Indication and operation
Display elementsdisplay and operating module LUC-Z15 at the device
Control elementson-site operation:
- via 3 keys of the display and operating module
- via handheld terminal
remote control:
- operation with operating program (for communication variant HART)
General information
Supplementary documentationtechnical information (TI)
manuals, brief instructions (BA, KA)
instruction manuals (SI)
control drawings (ZD)
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation- LUC-Z17, mounting bracket
- LUC-Z3*, mounting frame
- LUC-Z5*, wall bracket
- LUC-Z15, display and operating module for on-site operation
- LUC-Z16, weather protection cover
- LUC-Z40-**1*, remote display and operation

Classifications

SystemClasscode
ECLASS 13.027200506
ECLASS 12.027200506
ECLASS 11.027200506
ECLASS 10.0.127200506
ECLASS 9.027200506
ECLASS 8.027200506
ECLASS 5.127200506
ETIM 9.0EC003001
ETIM 8.0EC003001
ETIM 7.0EC003001
ETIM 6.0EC003001
ETIM 5.0EC001447
UNSPSC 12.141111950

Details: LUC-M40

Function

The LUC-M40 is a compact measuring device for continuous, non-contact level measurement. The maximum measuring range is 10 m in fluids and 5 m in bulk materials. By using the linearisation function, the devcie can also be used for flow measurements in open channels and measuring weirs.

The system integration is ensured via HART (standard), 4 mA ... 20 mA.

Function

This overview does not mark options which are mutually exclusive.
Option with * = on request/in preparation.

L

U

C

–

M

4

0

–

(1)

(2)

(3)

–

I

H

(4)

(5)

A

–

(6)

LUC

Device

LUC

Ultrasonic level sensor

M40

Series

M40

Flange version

(1)

Process connection

P

Universal flange DN80/ANSI 3 inch, plastic PP

Q

Universal flange DN80/ANSI 3 inch, plastic PVDF

S

Universal flange DN80/ANSI 3 inch, stainless steel 1.4535/316L

T

Universal flange DN100/ANSI 4 inch, plastic PP

U

Universal flange DN100/ANSI 4 inch, plastic PVDF

V

Universal flange DN100/ANSI 4 inch, stainless steel 1.4535/316L

M

with mounting bracket LUC-Z17

(2)

Housing

A1

Aluminium housing F12, IP68, thread M20x1.5

A2

Aluminium housing T12, IP68, coated, with separate terminal compartment

A4

Aluminium housing T12, IP68, coated, with separate terminal compartment, overvoltage protection

(3)

Cable entry

2

Cable gland M20x1.5

3

Thread G1/2

4

Thread NPT1/2

IH

Electrical output

IH

2-wire, 4 mA to 20 mA HART

(4)

Display and operation

A

* Prepared for remote display and operation, order remote display and operation as accessory LUC-Z40.

B

without display and operating module

D

with display and operating module inclusive on-site operation, envelope curve display

(5)

Process sealing sensor/flange

2

Viton

3

EPDM

A

Additional equipment

A

Basic version

(6)

Approval

NA

Version for non-explosion-hazardous area

EX

ATEX II 1/2G Ex ia IIC T6...T4 Ga/Gb
ATEX II 2G Ex ia IIC T6...T4 Gb

ES

ATEX II 1/2D Ex ta/tb IIIC T104°C Da/Db
ATEX II 2D Ex tb IIIC T95°C Db

E2

ATEX II 1/3D Ex ta/tc IIIC T104°C Da/Dc
ATEX II 3D Ex tc IIIC T95°C Dc

SX

ATEX II 1/2G Ex db [ia] IIC T6...T4 Ga/Gb
ATEX II 2G Ex db [ia] IIC T6...T4 Gb

S2

ATEX II 3G Ex ec IIC T6...T4 Gc

F1

FM IS, Cl. I/II/III, Div.1 Group A-G, N.I .Cl. I, Div.2

F2

FM XP, Cl. I/II/III, Div. 1, Group A-G

CG

CSA, General Purpose

C1

CSA IS, Cl. I/II/III, Div. 1, Group A-D, G + coal dust, N.I.

C2

CSA XP, Cl. I/II/III, Div. 1, Group A-D, G + coal dust, N.I.

Software: LUC-M40

Dil Seçeneği:
Device Description Files/DriversSürüm BilgileriDosya TipiDosya Boyutu
GSD / GSDZIP3 KB

İlişkili Ürünler: LUC-M40

Accessories
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa
Device DTM, For level devices, Frame application, like e. g. PACTware, must be installed separatelypa
General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

© 2024 Tüm Hakları Saklıdır.

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.