Fabrika Otomasyonu
Proses Otomasyonu

Sensor module, interface DoorScan Interface Set

DoorScan Interface Set
  • Sensor module for configurable DoorScan® presence sensor
  • Multi-function interface with full operation
  • Complete system supply for the entire system for one door
  • Can also be used to supply the emitter and receiver modules with power
  • Single button commissioning with automatic Teach-in function
  • SIL 2, certified in accordance with DIN 18650/EN 16005
  • Tool-free module mounting using snap-in mechanism
  • Door transition cable to connect the sensor to the controller

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:


Veri sayfası alıntısı: Teknik veriler  DoorScan Interface Set

Ürün Açıklaması
Replacement/extension sensor module for installation in the DoorScan® and TopScan sensor profile, multifunction interface module with door transition cable
General specifications
Operating modeBackground evaluation
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd2716 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function indicatorInterface: Red LED: detection, operating reserve, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status
Electrical specifications
Operating voltage24 V DC +/- 20 %
No-load supply current30 mA
Input
Test inputHigh active at U = 15 V DC to 30 V DC
Low active at U = < 2 V DC
Control inputStandby active at U = 11 V DC at 30 V DC
Output
Switching typeHinge edge light on
Leading edge light on/dark on, switchable
Signal outputNPN , short-circuit protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Response time≤ 52 ms
≤ 200 ms in boost operating mode
Conformity
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 12978
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Mounting heightmax. 3500 mm
Degree of protectionIP54 (when mounted)
Connectionplug strip , 6-pin
Cable: screw terminal , 6-pin
MaterialCable sheathing: polyamide PA 6, black , Wall bracket: ABS
CablePUR, gray, 6-wire
Sheath diameterapprox. 4.8 mm
Bending radiusmin. 48 mm
Length5000 mm
Massapprox. 140 g
Dimensions
Height24 mm
Depth31 mm
Length126 mm
General information
Scope of deliverySensor module, interface , Wall bracket , Screw kit , cord grip , cable , Cable sheathing , Hollow rivet
Suitable series
SeriesDoorScan®

Classifications

SystemClasscode
ECLASS 13.027270913
ECLASS 12.027270913
ECLASS 11.027270913
ECLASS 10.0.127270913
ECLASS 9.027270913
ECLASS 8.027270913
ECLASS 5.127270903
ETIM 9.0EC002550
ETIM 8.0EC002550
ETIM 7.0EC002550
ETIM 6.0EC002550
ETIM 5.0EC001821
UNSPSC 12.139121528

Details: DoorScan Interface Set

Informative Literature: DoorScan Interface Set

Dil Seçeneği:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: DoorScan Interface Set

Dil Seçeneği:
ManualsDilDosya TipiDosya Boyutu
ManualENGPDF2756 KB

Approvals: DoorScan Interface Set

Dil Seçeneği:
CertificatesSertifika No.DilDosya TipiDosya Boyutu
EU TUV Nord EC-Type Exam. Certificate Functional Safety44 205 13 095719ALLPDF89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0115FALLPDF480 KB

İlişkili Ürünler: DoorScan Interface Set

Accessories
Connecting cable between hinge side and leading edge side, Connection to interface module, Operating voltage: max. 300 V, Connection: 2 x plug-in terminalfa
Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connected, Operating voltage: max. 50 V, Connection: 5 x plug-in terminal, 8-pinfa
Pepperl+Fuchs Fonksiyonel Güvenlik Merkezi

SIL/PL değerlendirmesi içeren yüzlerce ürün, ücretsiz araçlar ve broşürler tek bir yerde: Güvenlik işlevleri uygulamanız gerektiğinde başlangıç noktanız, "Fonksiyonel Güvenlik Merkezi"dir.

K-System by Pepperl+Fuchs: Globally certified protection for people, plants, and the environment!

The largest portfolio of its kind: K-System components and systems are established in process industries around the world. Learn more!