Safety thru-beam sensor SLA29/35/73c R=65m

Sensing range up to 65 m
Self-monitoring (type 4 according to IEC/EN 61496-1)
Red transmission light
Integrated alignment aid
Clearly visible LED functional display and pre-fault indicator on the receiver
Sturdy housing
Waterproof, degree of protection IP67
Operation on control units of SB4 (SafeBox)

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler SLA29/35/73c R=65m

System components
Emitter		SLA29-T/35/73c R=65M
Receiver		SLA29-R/35/73c R=65M
General specifications
Effective detection range		6 ... 65 m
Threshold detection range		85 m
Light source		LED
Light type		modulated visible red light
Target size		static: 30 mm dynamic: 40 mm (at v = 1.6 m/s of the obstacle)
Alignment aid		LED red in receiver
Opening angle		< 5 °
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		4.4 E-10
Type		4
Indicators/operating means
Operation indicator		LED green
Function indicator		LED yellow: 1. LED lit constantly: signal > 2 x switching point (operating reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point
Electrical specifications
Operating voltage		Power supply via control unit
Protection class		III , IEC 61140
Conformity
Functional safety		ISO 13849-1
Product standard		EN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformity		CE
UKCA conformity		UKCA
UL approval		cULus Listed
TÜV approval		TÜV SÜD
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Shock resistance		10 g , 16 ms ; stationary applications only
Vibration resistance		1 mm , 10 ... 55 Hz ; stationary applications only
Mechanical specifications
Degree of protection		IP67 according to EN 60529
Connection		M12 connector, 4-pin
Material
	Housing	ABS plastic, RLA 1021 (yellow) painted
	Optical face	Plastic pane
Mass		per device 70 g
Dimensions
	Height	88 mm
	Width	25.8 mm
	Depth	54.3 mm

Classifications

System	Classcode
ECLASS 13.0	27272701
ECLASS 12.0	27272701
ECLASS 11.0	27272701
ECLASS 10.0.1	27272701
ECLASS 9.0	27272701
ECLASS 8.0	27272701
ECLASS 5.1	27272701
ETIM 9.0	EC002716
ETIM 8.0	EC002716
ETIM 7.0	EC002716
ETIM 6.0	EC002716
ETIM 5.0	EC002716
UNSPSC 12.1	46171620

Details: SLA29/35/73c R=65m

Product Documentation: SLA29/35/73c R=65m

Brief Instructions	Dil	Dosya Tipi	Dosya Boyutu
Instruction leaflet / Beipackzettel	ALL	PDF	523 KB

Design / Simulation: SLA29/35/73c R=65m

CAD	Dil	Dosya Tipi	Dosya Boyutu
CAD 3-D / CAD 3-D	ALL	STP	144 KB
CAD 3-D additional / CAD 3-D additional	ALL	STP	144 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SLA29/35/73c R=65m

Certificates	Sertifika No.	Dil	Dosya Tipi	Dosya Boyutu
/cert/cert1312d.pdf	Z10 020068 0099	ALL	PDF	365 KB
/cert/cert4281a.pdf	UL-CA-L215245-21-10607002-2 / UL-US-L215245-11-10607002-3	ALL	PDF	570 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2144C	ALL	PDF	484 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-7145	ALL	PDF	441 KB

Software: SLA29/35/73c R=65m

Software Tools	Sürüm Bilgileri	Dosya Tipi	Dosya Boyutu
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

İlişkili Ürünler: SLA29/35/73c R=65m

Matching System Components

	SB4-OR-4CP Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-4C Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-4M Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

Accessories

	OMH-05 Mounting aid
	Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa

	OMH-21 Mounting aid
	Mounting bracket: mounting aid for sensors in the RL* seriesfa

	OMH-22 Mounting aid
	Mounting aid for RL* seriesfa

	SLA-1-M Deviation mirror
	Deflecting mirror for single-beam deflection of the protection beam of safety light beams in the SL and SLA series, Safety Series: SLAfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Fonksiyonel Güvenlik Merkezi

Fonksiyonel Güvenlik Merkezini ziyaret edin

SIL/PL değerlendirmesi içeren yüzlerce ürün, ücretsiz araçlar ve broşürler tek bir yerde: Güvenlik işlevleri uygulamanız gerektiğinde başlangıç noktanız, "Fonksiyonel Güvenlik Merkezi"dir.

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.