Safety light curtain SLCS14

Resolution 14 mm (finger protection)
Protection field height up to 1200 mm
Self-monitoring (type 4 according to IEC/EN 61496-1)
SIL3 (IEC 61508)
Degree of protection IP67
Temperature range -35 ... 60°C (-31 ... 140 °F)
Slim design, mounting on three sides

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Tam veri sayfasını PDF olarak indirin:

Veri sayfası alıntısı: Teknik veriler SLCS14

Ürün Açıklaması
Safety light curtain

General specifications
Effective detection range		0.4 ... 8 m
Light source		IRED
Light type		modulated infrared light , 850 nm
Protection field height		see Table 1, max. 1200 mm
Operating mode		Startup/restart disable, deactivateable
Optical resolution		14 mm
Opening angle		< 5 °
Ambient light limit		Not sensitive to ambient light in accordance with IEC 61496-2
UL File Number		E215245
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		Depending on the protection field height; see Manual
Type		4
Indicators/operating means
Operation indicator		green: Power on
Function indicator		Green: OSSD ON , Red: OSSD OFF
Status indicator		Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error
Electrical specifications
Operating voltage		24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC
No-load supply current		Transmitter unit:≤ 150 mA Receiver: ≤ 150 mA (without outputs)
Protection class		III , IEC 61140
Power consumption		Transmitter unit: 5 W Receiver: 15 W
Input 1
Input type		Transmitter unit test
Input format		Break contact
Switching voltage		24 V DC
Input current		5 mA
Input 2
Input type		Transmitter unit, mode A/B
Function		Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA
Input 3
Input type		Receiver unit relay monitor
Input format		Break contact
Switching voltage		24 V DC
Input current		5 mA
Input 4
Input type		Receiver unit, start release
Input format		Break contact
Input current		5 mA
Input 5
Input type		Receiver unit, mode A/B (see transmitter unit, mode A/B)
Output
Response time		see Table 1, max. 54 ms
Output 1
Output type		Receiver unit OSSD
Signal output		PNP semiconductor , monitored for short and cross circuits
Switching voltage		ON: U_B - 2 V; OFF: < 1 V
Switching current		ON: max. 0.1 A; OFF: < 5 µA
Output 2
Output type		Receiver signal output start readiness
Signal output		PNP-semiconductor, short-circuit protected, 0.1A
Conformity
Functional safety		ISO 13849-1 ; EN 61508 part1-4
Product standard		EN 61496-1 ; IEC 61496-2
Photobiological safety		Risk group 0 according to IEC 62471
Approvals and certificates
CE conformity		CE
UKCA conformity		UKCA
UL approval		cULus Listed
TÜV approval		TÜV SÜD
Ambient conditions
Ambient temperature		-35 ... 60 °C (-31 ... 140 °F)
Storage temperature		-35 ... 70 °C (-31 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Shock resistance		10 g , 16 ms ; stationary applications only
Vibration resistance		0.35 mm , 10 ... 55 Hz ; stationary applications only
Mechanical specifications
Housing length L		see table 2
Degree of protection		IP67 , For indoor use only
Connection		Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm² Max. cable length 50 m
Material
	Housing	extruded aluminum section , gold anodized
	Optical face	Plastic pane , Transparent polycarbonate
Mass		see table 2
Dimensions
	Width	20 mm
	Depth	30 mm
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27272704
ECLASS 12.0	27272704
ECLASS 11.0	27272704
ECLASS 10.0.1	27272704
ECLASS 9.0	27272704
ECLASS 8.0	27272704
ECLASS 5.1	27272704
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	46171620

Details: SLCS14

Function

The safety light curtain consists of a transmitter and a receiver unit. The protected area is formed by infrared light beams transmitted from the transmitter unit to the receiver unit. The spacing between the individual light beams determines the minimum obstruction size (14 mm) that can be reliably detected within the entire protected area range.

Product Documentation: SLCS14

Manuals	Dil	Dosya Tipi	Dosya Boyutu
Manual SLCS* , SLCS*/35	ENG	PDF	3315 KB

Design / Simulation: SLCS14

CAD	Dil	Dosya Tipi	Dosya Boyutu
3-D model, 100 mm / 3-D-Modell, 100 mm	ALL	STP	1586 KB
3-D model, 1000 mm / 3-D-Modell, 1000 mm	ALL	STP	1586 KB
3-D model, 1100 mm / 3-D-Modell, 1100 mm	ALL	STP	1586 KB
3-D model, 1200 mm / 3-D-Modell, 1200 mm	ALL	STP	1586 KB
3-D model, 1300 mm / 3-D-Modell, 1300 mm	ALL	STP	1586 KB
3-D model, 1400 mm / 3-D-Modell, 1400 mm	ALL	STP	1586 KB
3-D model, 1500 mm / 3-D-Modell, 1500 mm	ALL	STP	1586 KB
3-D model, 1600 mm / 3-D-Modell, 1600 mm	ALL	STP	1586 KB
3-D model, 1700 mm / 3-D-Modell, 1700 mm	ALL	STP	1586 KB
3-D model, 1800 mm / 3-D-Modell, 1800 mm	ALL	STP	1586 KB
3-D model, 1900 mm / 3-D-Modell, 1900 mm	ALL	STP	1586 KB
3-D model, 200 mm / 3-D-Modell, 200 mm	ALL	STP	1586 KB
3-D model, 2000 mm / 3-D-Modell, 2000 mm	ALL	STP	1586 KB
3-D model, 2100 mm / 3-D-Modell, 2100 mm	ALL	STP	1586 KB
3-D model, 2200 mm / 3-D-Modell, 2200 mm	ALL	STP	1586 KB
3-D model, 2300 mm / 3-D-Modell, 2300 mm	ALL	STP	1586 KB
3-D model, 2400 mm / 3-D-Modell, 2400 mm	ALL	STP	1586 KB
3-D model, 300 mm / 3-D-Modell, 300 mm	ALL	STP	1586 KB
3-D model, 400 mm / 3-D-Modell, 400 mm	ALL	STP	1586 KB
3-D model, 500 mm / 3-D-Modell, 500 mm	ALL	STP	1586 KB
3-D model, 600 mm / 3-D-Modell, 600 mm	ALL	STP	1586 KB
3-D model, 700 mm / 3-D-Modell, 700 mm	ALL	STP	1586 KB
3-D model, 800 mm / 3-D-Modell, 800 mm	ALL	STP	1586 KB
3-D model, 900 mm / 3-D-Modell, 900 mm	ALL	STP	1586 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SLCS14

Certificates	Sertifika No.	Dil	Dosya Tipi	Dosya Boyutu
/cert/cert1228d.pdf	Z10 020068 0071	ALL	PDF	498 KB
Canada UL	CoC 20171120-E215245	ALL	PDF	442 KB
USA UL	UL-US-L215245-11-20607002-2 / UL-CA-L215245-21-20607002-1	ALL	PDF	561 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2137D	ALL	PDF	493 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-7143	ALL	PDF	458 KB

Software: SLCS14

Software Tools	Sürüm Bilgileri	Dosya Tipi	Dosya Boyutu
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

İlişkili Ürünler: SLCS14

Matching System Components

	SB4-OR-4XP Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-4M Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-4X Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

Accessories

	OMH-SLCT-01 Mounting aid
	Quick clamp and adjustment systemfa

	OMH-SLCT-02 Mounting aid
	Attachment aid for OMH-SLCT-01fa

	OMH-SLCT-03 Mounting aid
	Mounting bracket including adjustmentfa

	OMH-SLCT-04 Mounting aid
	Mounting bracket including adjustment (with loose bearing)fa

	OMH-SLCT-05 Mounting aid
	Mounting bracket including adjustmentfa

	OMH-SLCT-06 Mounting aid
	Swivel Bracketfa

	TR 14/30/50/60 Mounting aid Safety
	Universal test rod for device test of all light curtains from the SLCT and SLCS series, Safety Series: SLCT SLCSfa

	AA SLCT-01 Alignment aid
	Profile alignment aid; simplified alignment of the SLCS and SLCT safety light curtainsfa

	OMH-SLCT-100-1200 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Safety Series: SLCT / SLCSfa

	OMH-SLCT-100-2100 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Safety Series: SLCT / SLCSfa

	OMH-SLCT-100-2500 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Safety Series: SLCT / SLCSfa

	OMH-SLCT-110-1200 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glands, Safety Series: SLCT / SLCSfa

	OMH-SLCT-110-1500 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glands, Safety Series: SLCT / SLCSfa

	OMH-SLCT-110-2100 Accessories Safety
	Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glands, Safety Series: SLCT / SLCSfa

	OMH-SLCT-120-1200 Accessories Safety
	Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting bases, Safety Series: SLCT / SLCSfa

	OMH-SLCT-120-1500 Accessories Safety
	Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting bases, Safety Series: SLCT / SLCSfa

	OMH-SLCT-120-2100 Accessories Safety
	Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting bases, Safety Series: SLCT / SLCSfa

	OMH-SLCT-120-2500 Accessories Safety
	Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting bases, Safety Series: SLCT / SLCSfa

	OMH-SLCT-200 Accessories Safety
	Rotation of the SLCT-M-01 inclined mirror around the physically preferred rotational axis, Vertical adjustment decoupled from rotation, Mounting on ground anchors, Lead-away of lines in floor via hole for NW29 coupling nut and corrugated hose, Base plate to compensate for uneven ground, particularly for brittle surfaces, Only approx. 20 mm in height from bottom edge of base plate to top edge of ground plate, Safety Series: SLCT / SLCSfa

	SLCT-M-01-1200 Accessories Safety
	Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidence, Safety Series: SLCT / SLCSfa

	SLCT-M-01-1500 Accessories Safety
	Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidence, Safety Series: SLCT / SLCSfa

	SLCT-M-01-2100 Accessories Safety
	Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidence, Safety Series: SLCT / SLCSfa

	OMH-SLCT-12-500 Mounting aid
	Mounting bracket, muting arm with round rod d=12 mmfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Fonksiyonel Güvenlik Merkezi

Fonksiyonel Güvenlik Merkezini ziyaret edin

SIL/PL değerlendirmesi içeren yüzlerce ürün, ücretsiz araçlar ve broşürler tek bir yerde: Güvenlik işlevleri uygulamanız gerektiğinde başlangıç noktanız, "Fonksiyonel Güvenlik Merkezi"dir.

Pepperl+Fuchs Elektronik San. ve Tic. Ltd. Şti.
Atatürk Mah. Şeref Sok. No: 9
34758 Ataşehir
Türkiye
phone +90 216 577 2250

Pepperl+Fuchs, endüstriyel sensörlerin üretimi ve geliştirilmesinde küresel otomasyon pazarının lider firmalarından biridir.Yenilikçi yaklaşım, kaliteden ödün vermeme ve istikrarlı büyüme 70 yıldan beri devam eden başarımızı garanti etmektedir. Pepperl+Fuchs’un dünya çapında 6.300 çalışanı mevcuttur ve Almanya, ABD, Singapur, Macaristan, Endonezya ve Vietnam’da çoğu ISO 9001 sertifikalı, üretim tesisleri bulunmaktadır.