Corded 1-D and 2-D Handheld Reader for Zone 1/21 IDM-Z1-x60-D-*

Approved for Zone 1 and 21 (ATEX and IECEx)
All 1-D standard barcode families supported
2-D model supports Data Matrix, QR, and other two-dimensional codes
Fall tested from 2 m to ensure reliability

Technical Data
Details
Product Documentation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of IDM-Z1-x60-D-*

Product Description
Corded 1-D and 2-D Handheld Reader for Zone 1/21

General specifications
Type		scan frequency: 500 Hz (1-D models), 60 Hz (2-D model)
Light type		LED, visible red light (630 / 1310 nm) ambient light immunity 100 000 lx
Readable codes		barcode types: Code 39, Code 39 Trioptic, Code 32, Code 93, Code 11, Codabar, Code 128, GS1-128 / EAN 128, UPC / EAN / JAN (with addition), MSI/Plessey, UK/Plessey, IATA, Interleaved 2 of 5, Standard and Industrial 2 of 5, Matrix 2 of 5, Telepen, GS1 DataBar, Australian Post, China Post, German Post, US Planet, US Postnet, British Post, Intelligent Mail, Japan Post, Korean Post, Dutch KIX Post stacked code types (depending on model selected): PDF417, MicroPDF417, Code 49, Code 16K, Composite, Codablock F 2-D code types (depending on model selected): Data Matrix, QR, MicroQR, Aztec, Maxicode
Read distance		20 ... 850 mm (1-D model) 30 ... 400 mm (2-D model)
Resolution		ca. ≥ 0.76 mm (1-D models) ca. ≥ 0.13 mm (2-D model)
Indicators/operating means
Indicators		2 x LED (operating state) beeper/buzzer (can be switched off)
Interface
Interface type		RS-232, RS-422, and USB
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61000-6-2:2005 + AC:2005 , EN 61000-6-4:2007 + A1:2011
Low voltage		EN 60950-1:2006+A1:2010+A2:2013+A11:2009+A12:2011
RoHS
	Directive 2011/65/EU (RoHS)	EN 50581:2012
Ambient conditions
Operating temperature		-20 ... 50 °C (-4 ... 122 °F)
Storage temperature		-30 ... 70 °C (-22 ... 158 °F) (1-D model) -40 ... 70 °C (-40 ... 158 °F) (2-D model)
Relative humidity		95 % non-condensing
Impact resistance		50 fall tests from 2 m height onto concrete
Mechanical specifications
Degree of protection		IP65
Mass		approx. 200 g without cable
Dimensions		104 mm x 185 mm x 76 mm
Data for application in connection with hazardous areas
EU-type examination certificate		IBExU 18ATEX1049 IECEx IBE 18.0008
	Marking	1-D model: II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135°C Db 2-D model: II 2G Ex ib op is IIB T4 Gb II 2D Ex ib op is IIIC T135°C Db
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2018 EN 60079-11:2012 EN 60079-28:2015
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	19200390
ECLASS 12.0	19200390
ECLASS 11.0	19200390
ECLASS 10.0.1	19200390
ECLASS 9.0	19200390
ECLASS 8.0	19200390
ECLASS 5.1	27242392
ETIM 9.0	EC002999
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC002999
UNSPSC 12.1	43211711

Details: IDM-Z1-x60-D-*

Function

IDM-Z1-x60-D-* corded handheld readers scan 1-D and 2-D codes in Zone 1/21 hazardous locations or safe areas. They are optimized for use with Pepperl+Fuchs VisuNet HMI components.

1-D models read all common one-dimensional barcode types, with an option available to read stacked codes.
The 2-D model reads one-dimensional barcodes and stacked codes, as well as two-dimensional codes such as Data Matrix and QR codes.

SK-IDM-Z1-*... supply modules enable stand-alone applications and data communication with the host PC or PLC in the safe area via RS-232/RS-422 or USB communication.

A variety of cables are available as accessories for connectivity to VisuNet HMI components.

Product Documentation: IDM-Z1-x60-D-*

Safety and Security Documentation	Language	File Type	File Size
Instruction manual	ENG	PDF	200 KB
Manuals
Manual	ENG	PDF	1684 KB
Manufacturer's manual	ENG	PDF	4306 KB
Manufacturer's quick start guide	ENG	PDF	1240 KB

Approvals: IDM-Z1-x60-D-*

Certificates	Certificate No.	Language	File Type	File Size
ATEX Certificate	IBExU18ATEX1049	ALL	PDF	1366 KB
IECEx Certificate of Conformity	IECEx IBE 18.0008	ALL	LINK	---

Associated Products: IDM-Z1-x60-D-*

Accessory of

	PC-GXP1100-19S--P3/P4 Operator Workstation (PC)	Contact Us
	VisuNet GXP PC Zone 1/21 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa

	PC-GXP1100-22F--P3/P4 Operator Workstation (PC)	Contact Us
	VisuNet GXP PC Zone 1/21 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa

	RM-GXP1200-22F--T3 Operator Workstation (RM)	Contact Us
	VisuNet GXP Remote Monitor Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa

	RM-GXP1200-19S--T3 Operator Workstation (RM)	Contact Us
	VisuNet GXP Remote Monitor Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa

	RM-GXP1100-19S--T3 Operator Workstation (RM)	Contact Us
	VisuNet GXP Remote Monitor Zone 1/21 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa

	PC-GXP1200-22F--P3/P4 Operator Workstation (PC)	Contact Us
	VisuNet GXP PC Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22pa

	PC-GXP1200-19S--P3/P4 Operator Workstation (PC)	Contact Us
	VisuNet GXP PC Zone 2/22 (2020 Generation, Intel® Atom Apollo Lake Processor), 19 in (48 cm) display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa

	RM-GXP1100-22F--T3 Operator Workstation (RM)	Contact Us
	VisuNet GXP Remote Monitor Zone 1/21 (2020 Generation, Intel® Atom Apollo Lake Processor), 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with VisuNet RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa

Accessories

	CBL-IDMx6x-DB-J1-S-C30-N0 Serial extension cable	Contact Us
	Serial extension cable for IDM-Zx-* handheld barcode readers, Serial extension cable, Suitable for Zone 1/21 and Zone 2/22 (ATEX & IECEx), M12 female socket to M12 male connector, Protocol: serialpa

	CBL-IDMx6x-DB-J1-S-S60-N0 Serial extension cable	Contact Us
	Serial extension cable for IDM-Zx-* handheld barcode readers, Serial extension cable, Suitable for Zone 1/21 and Zone 2/22 (ATEX & IECEx), M12 female socket to M12 male connector, Protocol: serialpa

	CBL-IDMx6x-DB-J1-S-S30-N0 Serial extension cable	Contact Us
	Serial extension cable for IDM-Zx-* handheld barcode readers, Serial extension cable, Suitable for Zone 1/21 and Zone 2/22 (ATEX & IECEx), M12 female socket to M12 male connector, Protocol: serialpa

	CBL-IDMx6x-DB-J1-S-C60-N0 Serial extension cable	Contact Us
	Serial extension cable for IDM-Zx-* handheld barcode readers, Serial extension cable, Suitable for Zone 1/21 and Zone 2/22 (ATEX & IECEx), M12 female socket to M12 male connector, Protocol: serialpa

	CBL-IDMx60-D-J1-S-C38-N0 Connecting cable	Contact Us
	Connection cable for IDM-Z1-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa

	CBL-IDM160-D-J1-U-S18-N0 Connecting cable	Contact Us
	Connection cable for IDM-Z1-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa

	CBL-IDM160-D-J1-U-C38-N0 Connecting cable	Contact Us
	Connection cable for IDM-Zx-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Zx-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1/21 and Zone 2/22 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa

	SCANNER-HOLDER-U1-XX00-N0 Scanner holder for 1-D/2-D code handheld readers for VisuNet GXP 21.5"	Contact Us
	Stainless steel holder for for IDM-Z1- handheld readers, compatible with AG-XX00 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-XX00 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa

	SCANNER-HOLDER-U1-AG1-N0 Scanner holder for 1-D/2-D code handheld readers for VisuNet GXP 19"	Contact Us
	Stainless steel holder for for IDM-Z1- handheld readers, compatible with AG1 housing, Mounting bracket, Simple and fast mounting, Compatible with AG1 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa

	CBL-IDMx60-D-J1-S-S18-N0 Connecting cable	Contact Us
	Connection cable for IDM-Zx-x6x-D-* corded Handheld Readers, Connection cable for corded IDM-Zx-x6x-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1/21 and Zone 2/22 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa

	DATL-IDM-DB-S-XX00-N0 Connecting cable	Contact Us
	1 m connector cable for corded handheld reader with M12 connector to open cable end, Connector cable for wired 1-D Scanner IDM-Z1-16x-D-1D-J1-S-* and 2-D Scanner IDM-Z1-26x-D-2D-J1-S* and Bluetooth Basestation IDM-Z1-x6x-B-J1-BT-N0, 4-wire with ferrules, IDM Scanner connection via M12-connector, Note: Supports only RS232 Scanner/Basestationpa

	SK-IDM-Z1-x60-* Supply module for IDM-Z1-*	Contact Us
	Power supply for IDM-Z1-* handheld readers and base station, AC and DC power supplies for IDM-Z1-* handheld readers and base station, Enable operation in Zone 1/21, Sturdy aluminum housingpa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified. Pepperl+Fuchs does not sell personal data.