Sélectionnez votre pays
F2D0-MIO-Ex12.FF.* Multi-Input/OutputFieldConnex® Fieldbus
Principaux avantages en un coup d'œil
- For discrete inputs and outputs
- Aluminum cast iron, IP66
- Configurable cable entries for bus lines and field signal lines
- International approvals
- For FOUNDATION Fieldbus H1
- Installation in Zone 1/Div. 1, intrinsically safe
- Sensors in Zone 0/Div. 1
- Monitors sensor condition
- Removable terminals
- Power, Com, Diagnostics, and Error LEDs
- Test points for easy troubleshooting
Afficher plus
Remarque
Tous les documents relatifs aux produits, tels que les certificats, les déclarations de conformité, etc., qui ont été émis avant la conversion sous le nom de Pepperl+Fuchs GmbH ou Pepperl+Fuchs AG, s'appliquent également à Pepperl+Fuchs SE.
DE
- DE
- EN
Données techniques relatives à F2D0-MIO-Ex12.FF.*
| Multi-input/output for digital signals, stand-alone device with aluminum housing for field installation |
| Design / Mounting | Outside installation | |
| Installation in hazardous area | Zone 1 / Div. 1 | |
| Electronic component | Binary multi-input/output R8D0-MIO-Ex12.FF* For technical data on installed electronic component see datasheet. |
| Fieldbus type | FOUNDATION Fieldbus |
| Number of inputs | 12 |
| Foundation Fieldbus/Field circuit | safe galvanic isolation acc. to EN 60079-11, voltage peak value 375 V |
| Electromagnetic compatibility | |||||
| |||||
| Low voltage | |||||
| |||||
| Galvanic isolation | EN 60079-11 | |
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) hazardous area | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | ≤ 95 % non-condensing | |
| Shock resistance | 15 g , 11 ms | |
| Vibration resistance | 10 g , 10 ... 150 Hz | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Connection type | plug-in terminals , spring terminal and screw terminal | |||||||
| Core cross section | ||||||||
| ||||||||
| Cable diameter | see table 2 | |||||||
| Cable gland | sensor inputs M16, fieldbus M20 | |||||||
| Housing material | Aluminum | |||||||
| Degree of protection | IP66 | |||||||
| Mass | 1800 g | |||||||
| Mounting | wall mounting | |||||||
| EU-type examination certificate | BVS 16 ATEX E 075 X | ||||
| |||||
| Bus | FISCO see EC-Type Examination Certificate | ||||
| Directive conformity | |||||
| |||||
II 2 (1) G Ex ib [ia Ga] IIC T4 Gb , [exsign] II 3 (1) G Ex ic [ia Ga] IIC T4 Gc , [exsign] II 3 (1) G Ex ec [ia Ga] IIC T4 Gc , [exsign] I (M1) [Ex ia Ma] I , [exsign] II (1) D [Ex ia Da] IIIC , [exsign] II 2 (1) D Ex tb [ia Da] IIIC T130 °C Db| FM approval | pending | ||||
| IECEx approval | IECEx BVS 16.0051X | ||||
| |||||
| Marine approval | pending |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |