Línea de servicio de Sensores Industriales
+52 55 5636-0970
+52 55 5636-0975
Atención al cliente para protección contra explosiones
+52 55 5636-0970
+52 55 5636-0975

AS-Interface safety module VAA-2E1A-G10-SAJ/EA2J-2X1M

VAA-2E1A-G10-SAJ/EA2J-2X1M
  • Connection of contact safety switches, e.g. EMERGENCY STOP button
  • Applications up to PLe
  • Modular safety solution
  • Ultra-compact enclosure
  • Degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:


Extracto de la hoja de datos: Información técnica del  VAA-2E1A-G10-SAJ/EA2J-2X1M

Descripción del producto
G10 safety module
2 safety inputs and
1 standard electronic output
General specifications
Node typeSafety-Slave
AS-Interface specificationV3.0
Required gateway specification≥ V2.1
UL File NumberE223772 "For use in NFPA 79 Applications only"
Indicators/operating means
LED FLTerror display; LED red
red: communication error or address is 0
LED AS-iAS-Interface voltage; green LED
green: voltage OK
flashing green: address 0
LED INswitching state (input); 2 LED yellow
LED OUTSwitching state (output); LED yellow
Electrical specifications
Rated operating voltage26.5 ... 31.6 V from AS-Interface (PELV)
Rated operating current≤ 90 mA
Protection classIII
Surge protectionovervoltage category III
Rated insulation voltage32 V
Pulse withstand voltage0.8 kV
Input
Number/Type2 safety-related inputs for mechanical contacts, crossed-circuit monitored:
2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or
1 2-channel contact: up to category 4/PL e to ISO 13849-1
Supplyfrom AS-Interface
Voltage20 ... 30 V DC pulsed
Currentinput current limited ≤ 15 mA,
short-circuit protected
Output
Number/Type1 conventional electronic output, PNP
Supplyfrom AS-Interface
Voltage(UASI - 7.0 V) ≤ UOUT ≤ UASI
Current50 mA , short-circuit/overload protected
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007
Machinery Directive
Directive 2006/42/ECEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015
Standard conformity
Degree of protectionEN 60529:2000
Fieldbus standardEN 62026-2:2013
Electrical safetyIEC 61140:2009
Emitted interferenceEN 61000-6-4:2007
AS-InterfaceEN 62026-2:2013
Noise immunityIEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005
Functional safetyEN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015
Programming instructions
ProfileS-7.B
IO code7
ID codeB
ID1 codeF
ID2 code0
Data bits (function via AS-Interface)InputOutput
D0 dyn. safety code 1 OUT 1
D1 dyn. safety code 1 -
D2 dyn. safety code 2 -
D3 dyn. safety code 2 -
Parameter bits (programmable via AS-i)function
P0communication monitoring
P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised
P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition
P1not used
P2not used
P3not used
Approvals and certificates
UL approvalcULus Listed, Type 1 enclosure
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-25 ... 80 °C (-13 ... 176 °F)
Relative humidity< 95 %
Altitude≤ 2000 m above MSL
Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks
10 g, 16 ms in 6 spatial directions 1000 shocks
Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Pollution degree3
Mechanical specifications
Degree of protectionIP67
This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE
ConnectionAS-Interface: AS-Interface flat cable
Inputs/outputs: open conductor ends
Material
Contactsopen conductor ends with connector sleeves
HousingPBT
CablePUR
Mounting screwStainless steel 1.4305 / AISI 303
Cable
Sheath diameter∅4,3 mm
Bending radius> 5 x cable diameter, fixed installation > 10 x cable diameter, movable installation not appropriate for conveyor chains
Colorblack
Cores4 x 0.34 mm2
Length1 m
Mass200 g
Tightening torque, fastening screws1.65 Nm
Dimensions
Height21.5 mm
Width27.7 mm
Length40.5 mm

Classifications

SystemClasscode
ECLASS 13.027272603
ECLASS 12.027242604
ECLASS 11.027242604
ECLASS 10.0.127242604
ECLASS 9.027242604
ECLASS 8.027242604
ECLASS 5.127242604
ETIM 9.0EC001599
ETIM 8.0EC001599
ETIM 7.0EC001599
ETIM 6.0EC001599
ETIM 5.0EC001599
UNSPSC 12.139121535

Details: VAA-2E1A-G10-SAJ/EA2J-2X1M

Informative Literature: VAA-2E1A-G10-SAJ/EA2J-2X1M

Seleccionar idioma:
LiteratureIdiomaTipo de archivoTamaño
Product Information - AS-Interface Less is better - G10 Safety - small, smart, and modularENGPDF1290 KB

Product Documentation: VAA-2E1A-G10-SAJ/EA2J-2X1M

Seleccionar idioma:
Brief InstructionsIdiomaTipo de archivoTamaño
Instruction leaflet / BeipackzettelALLPDF985 KB
Manuals
Manual VAA-2E*-G10-SAJ*ENGPDF1971 KB

Design / Simulation: VAA-2E1A-G10-SAJ/EA2J-2X1M

Seleccionar idioma:
CADIdiomaTipo de archivoTamaño
CAD 3-D / CAD 3-DALLSTP137 KB
CAD Portal / CAD PortalALLLINK---

Approvals: VAA-2E1A-G10-SAJ/EA2J-2X1M

Seleccionar idioma:
CertificatesNúmero de CertificadoIdiomaTipo de archivoTamaño
Canada, USACoC 20171220-E223772 RptRef E223772-20130501ALLPDF442 KB
EU Ecolab Material ResistanceECOLABALLPDF1096 KB
Worldwide AS-International Association AS-Interface99902ALLPDF111 KB
Declaration of Conformity
Declaración de conformidad UETDOC-2365FSPASPAPDF196 KB

Software: VAA-2E1A-G10-SAJ/EA2J-2X1M

Seleccionar idioma:
Software ToolsLiberar InfoTipo de archivoTamaño
SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface SafetyZIP622 KB

Productos asociados: VAA-2E1A-G10-SAJ/EA2J-2X1M

Matching System Components
Emergency stop buttonfa
Accessories
AS-Interface Handheld with accessoryfa
Adapter cable G10 module/hand-held programming devicefa
Gama de productos AS-Interface

Conozca la gama completa de los productos AS-Interface.