Subrack K-RACK.2.**.*.*.WW.01-Y*******
- Subrack for K-System
- Replacement for subrack of the E-System
- Max. 33 slots for isolators
- Short design (211 mm mounting depth)
- Connection via marshalling patchboards
- Partial and combined assembly possible
- Complete wiring according to customer requirements
- Allows to retain cable routing in the switch cabinet
- No structural changes on the switch cabinet required
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for K-RACK.2.**.*.*.WW.01-Y*******
| Slots | ||
|---|---|---|
| Supply | max. 2 , see section application | |
| Isolators | max. 33 , see section application | |
| Supply | ||
| Connection | isolator power supply via marshalling patchboards or Power Rail | |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators | |
| Fusing | max. 4 A , in consideration of rated voltage of used isolators | |
| Redundancy | redudnancy possible, depends on the used power feed module | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61439-1:2011 (J.9.4.2 b) , EN 61439-2:2011 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN IEC 63000:2018 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Connection | ||
| Field side | marshalling patchboards | |
| Control side | marshalling patchboards | |
| Supply | marshalling patchboards or Power Rail | |
| Core cross section | field side: max. 2.5 mm2 control side: max. 2.5 mm2 internal signal wiring: 0.25 mm2 supply: max. 1.5 mm2 |
|
| Material | ||
| Housing | galvanized steel | |
| Surface | galvanized , vibratory finishing | |
| Mass | approx. 4 kg , without modules | |
| Dimensions | 485 mm x 132 mm x 250 mm (W x H x D) | |
| Height | 132 mm | |
| Width | 485 mm | |
| Depth | 250 mm | |
| Mounting | slotted hole 8 x 10 mm | |
| Grounding | via front fastening M8 , via lateral fastening on both sides M5 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 32101514 |
Details: K-RACK.2.**.*.*.WW.01-Y*******
Function
The device is a subrack for K-System isolators, which replaces the E-card subrack.
A maximum of 33 isolators can be mounted on the device. The isolator modules are mounted on the DIN mounting rail.
The isolators can be supplied via marshalling patchboards or via the power rail.
Faults can be forwarded to the control via the power rail for evaluation.
The signals are transmitted to the field and control side via marshalling patches.
Product Documentation: K-RACK.2.**.*.*.WW.01-Y*******
| Safety and Security Documentation | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Instruction manual | ENG | 139 KB |
Approvals: K-RACK.2.**.*.*.WW.01-Y*******
| Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4835 | ALL | 264 KB |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.