Solenoid Driver KFD2-SLD-Ex2.1045-Y1

2-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 45 mA at 10 V DC
Line fault transparency (LFT)
Test pulse immunity

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for KFD2-SLD-Ex2.1045-Y1

General specifications
Signal type		Digital Output
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		18 ... 30 V DC
Power consumption		max. 3.5 W at 45 mA output current
Input
Connection side		control side
Connection		terminals 7, 8, 9
Test pulse length		max. 2 ms from DO card
Signal level		loop powered 1-signal: 18 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Rated current		0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 20 mA (minimum load current DO card)
Inrush current		≤ 200 mA after 100 µs
Output
Connection side		field side
Connection		channel 1: terminals 1+, 2-, 3- channel 2: terminals 4+, 5-, 6-
Internal resistor		276 Ω
Current		45 mA
Voltage		≥ 10 V
Current limit		45 mA
Open loop voltage		min. 23.6 V
Load		nominal 0.05 ... 20 kΩ , valid range for line fault detection (LFD)
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Line fault detection
	Test current	max. 350 µA , calculated by I_LFD = 3.3 V / (10 kΩ + R_Load)
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Power supply/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 , EN IEC 61326-1:2021 (industrial locations) , EN IEC 61326-3-2:2018 For further information see system description.
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		FIDI 21 ATEX 0091 X
	Marking	II 3(1)G Ex ec [ia Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia
	Voltage	25.2 V
	Current	93 mA
	Power	586 mW (linear characteristic)
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval		E106378
	Control drawing	116-0488
IECEx approval
	IECEx certificate	IECEx FIDI 21.0009X
	IECEx marking	Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KFD2-SLD-Ex2.1045-Y1

Function

This isolated barrier is used for intrinsic safety applications.

The device supplies power to solenoids, LEDs and audible alarms located in the explosion-hazardous area.

The device is controlled with a loop powered signal or a bus powered logic signal.

The device is immune to the test pulses of various control systems.

The device simulates a minimum load at the input. The minimum load is set via the mode of operation. In the loop-powered mode of operation, a minimum load of 20 mA is simulated. In the bus-powered mode of operation, a minimum load of 5 mA is simulated.

The line fault transparency function can display a line fault in the field by a change in impedance at the switching input of the solenoid driver.

A fault is indicated by LEDs and output via a fault indication output.

Informative Literature: KFD2-SLD-Ex2.1045-Y1

Literature	Språk	Filtype	Filstørrelse
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB

Product Documentation: KFD2-SLD-Ex2.1045-Y1

Product information	Språk	Filtype	Filstørrelse
Application Guideline Solenoid Drivers	ENG	PDF	734 KB
Safety and Security Documentation
Bruksanvisningen	NOR	PDF	163 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KFD2-SLD-Ex2.1045-Y1

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	2308 KB

Approvals: KFD2-SLD-Ex2.1045-Y1

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
China SITIIAS CCC Ex Certificate	2022322316004905 (Singapore)	ALL	PDF	2177 KB
Europe Fiditas ATEX Category 3 (1) G ATEX Category (M1) ATEX Category (1) D	FIDI 21 ATEX 0091X	ALL	PDF	4154 KB
India PESO (India) CCOE	A/P/HQ/KA/104/6092 (P576842)	ALL	PDF	106 KB
USA Canada UL Hazardous Location cULus UL E106378	CoC E106378 Rep Ref E106378-20221005	ALL	PDF	456 KB
United Kingdom CML UKEX Category (1) D UKEX Category (M1) UK-Type Examination Certificate UKEX Category 3 (1) G	CML 22UKEX2328X	ALL	PDF	170 KB
Worldwide Fiditas IECEx Certificate of Conformity	IECEx FIDI 21.0009X	ALL	LINK	---
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	146 KB
Declaration of Conformity
EU-Declaration of conformity	TDOC-6611BENG	ENG	PDF	233 KB
UK-Declaration of conformity	TDOC-6987AENG	ENG	PDF	201 KB

Relaterte produkter: KFD2-SLD-Ex2.1045-Y1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Snarveier

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.