Mounting bracket AB-12

Retainer for all cylindrical sensors with M12 thread

Technical Data
Design / Simulation
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for AB-12

Produktbeskrivelse
Mounting aid

General specifications
Inside diameter		12 mm
Mechanical specifications
Material		Stainless steel
Dimensions		31.8 mm x 31.8 mm x 25.4 mm
	Height	25.4 mm
	Width	31.8 mm
	Length	31.8 mm

Classifications

System	Classcode
ECLASS 13.0	27273701
ECLASS 12.0	27273701
ECLASS 11.0	27273701
ECLASS 10.0.1	27273701
ECLASS 9.0	27273701
ECLASS 8.0	27279202
ECLASS 5.1	27279202
ETIM 9.0	EC003015
ETIM 8.0	EC003015
ETIM 7.0	EC003015
ETIM 6.0	EC003015
ETIM 5.0	EC003015
UNSPSC 12.1	31162301

Details: AB-12

Design / Simulation: AB-12

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	28 KB
CAD Portal / CAD Portal	ALL	LINK	---

Relaterte produkter: AB-12

Accessory of

	NMB5-12GM65-E2-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: Stainless steel 1.4305 / AISI 303fa

	NMB5-12GM55-E2 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: cable PUR , 2 m, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP69Kfa

	NMB2-12GM80-US-FE Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: AC/DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: UC, Rated operating voltage: 20 ... 250 V AC/DC, Connection type: cable PUR , 2 m, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67fa

	NMB5-12GM45-Z4-C4-300MM-V1 Inductive sensor
	Metal face proximity sensors, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: fixed cable with plug, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Threading: M12 x 1, Material: POCfa

	NMB2-12GM65-E2-NFE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa

	NMB2-12GM75-Z0-C-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM75-Z0-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specification, Threading: M12 x 1fa

	NMB2-12GM75-Z3-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specification, Threading: M12 x 1fa

	NMB2-12GM85-US-FE-V12 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: AC/DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: UC, Rated operating voltage: 20 ... 250 V AC/DC, Connection type: Connector plug 1/2"-20 UN , 3-pin, Housing material: Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM55-E0-FE Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: NPN, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: 2 m PUR cable, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP69Kfa

	NMB2-12GM55-E2-FE Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: 2 m PUR cable, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP69Kfa

	NMB2-12GM65-E2-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa

	NMB2-12GM65-E0-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: NPN, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa

	NMB2-12GM65-E3-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally closed (NC), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa

	NMB2-12GM65-E0-NFE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: NPN, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP67 / IP68 / IP69K - cordset dependent according to cable specificationfa

	NMB5-12GM65-E3-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally closed (NC), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM40-Z3-C-FE-300MM-V1 Inductive sensor
	Metal face proximity sensors, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: fixed cable with plug, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM65-E2-C-FE-V1 Inductive sensor
	Metal face proximity sensors, metal face, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: PNP, Installation: flush, Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: V1 connector (M12 x 1), 4-pin, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB5-12GM45-Z9-C4-300MM-V1 Inductive sensor
	Metal face proximity sensors, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: fixed cable with plug, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303, Degree of protection: IP67, Threading: M12 x 1, Material: POCfa

	NMB5-12GM65-E0-V1 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: NPN, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM85-US-C-FE-V12 Inductive sensor
	Metal face proximity sensors, metal face, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: AC/DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Type of voltage: UC, Rated operating voltage: 20 ... 250 V AC/DC, Connection type: Connector plug 1/2"-20 UN , 3-pin, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB2-12GM40-Z0-C-FE-300MM-V1 Inductive sensor
	Metal face proximity sensors, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: Two-wire, Installation: flush, Output polarity: DC, Output type: 2-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 6 ... 30 V DC, Type of voltage: DC, Connection type: fixed cable with plug, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB5-12GM65-E2-C-V1 Inductive sensor
	Metal face proximity sensors, metal face, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB5-12GM65-E2-C4-V1 Inductive sensor
	Metal face proximity sensors, metal face, Weld immune proximity sensors, Switching function: Normally open (NO), Output type: PNP, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: Xylan coated - Stainless steel 1.4305 / AISI 303fa

	NMB5-12GM55-E0 Inductive sensor
	Metal face proximity sensors, metal face, Switching function: Normally open (NO), Output type: NPN, Installation: flush (Requirements: see drawing below), Output polarity: DC, Output type: 3-wire, Thread mold: M12, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Type of voltage: DC, Connection type: cable PUR , 2 m, Housing material: Stainless steel 1.4305 / AISI 303, Degree of protection: IP69Kfa

	UBC250-12GM-E5-V1 Ultrasonic sensor
	High chemical resistance through PTFE coated transducer surface, Stainless Steel enclosure, 1 switch output, Series: -12GM, Operating voltage: 10 ... 30 V DC , ripple 10 %_SS, Output type: 1 switch output PNP Normally open/closed , programmable, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 4-pinfa

	UBC250-12GM-I-V1 Ultrasonic sensor
	Single head system, High chemical resistance through PTFE coated transducer surface, Stainless Steel enclosure, Analog output 4 mA ... 20 mA, Series: -12GM, Operating voltage: 10 ... 30 V DC , ripple 10 %_SS, Output type: 1 analog output 4 ... 20 mA, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: Connector plug M12 x 1 , 4-pinfa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.