Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for
CJ2-18GK-N
| General specifications |
| Switching function | Normally open (NO) |
| Output type | NAMUR |
| Rated operating distance | 2 mm |
| Installation | non-flush |
| Assured operating distance | 0 ... 1.44 mm |
| Output type | 2-wire |
| Nominal ratings |
| Installation conditions | |
| A | 15 mm |
| B | 30 mm |
| C | 20 mm |
| F | 120 mm |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| Operating voltage | 7 ... 12 V |
| Switching frequency | 0 ... 1 Hz |
| Current consumption | |
| Measuring plate not detected | ≤ 1 mA |
| Measuring plate detected | ≥ 2.4 mA |
| Functional safety related parameters |
| MTTFd | 5030 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Compliance with standards and directives |
| Standard conformity | |
| NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| IECEx approval | |
| Equipment protection level Ga | IECEx TUN 20.0014X |
| Equipment protection level Gb | IECEx TUN 20.0014X |
| Equipment protection level Da | IECEx TUN 20.0014X |
| ATEX approval | |
| Equipment protection level Ga | TÜV 03 ATEX 2003 X |
| Equipment protection level Gb | TÜV 03 ATEX 2003 X |
| Equipment protection level Da | TÜV 03 ATEX 2003 X |
| FM approval | |
| Control drawing | 116-0165 |
| UL approval | cULus Listed, General Purpose |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mechanical specifications |
| Connection type | cable |
| Housing material | PBT |
| Sensing face | PBT |
| Degree of protection | IP68 |
| Cable | |
| Cable diameter | 6 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | PVC |
| Core cross section | 0.75 mm2 |
| Length | 2 m |
| Dimensions | |
| Length | 80 mm |
| Diameter | 18 mm |
| General information |
| Use in the hazardous area | see instruction manuals |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274201 |
| ECLASS 12.0 | 27274201 |
| ECLASS 11.0 | 27270102 |
| ECLASS 10.0.1 | 27270102 |
| ECLASS 9.0 | 27270102 |
| ECLASS 8.0 | 27270102 |
| ECLASS 5.1 | 27270102 |
| ETIM 9.0 | EC002715 |
| ETIM 8.0 | EC002715 |
| ETIM 7.0 | EC002715 |
| ETIM 6.0 | EC002715 |
| ETIM 5.0 | EC002715 |
| UNSPSC 12.1 | 39121550 |
Details:
CJ2-18GK-N
Product Documentation:
CJ2-18GK-N
Design / Simulation:
CJ2-18GK-N
Relaterte produkter:
CJ2-18GK-N
| Accessories |
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
+47 3557 3800