Read head WCS3B-LS710S

EtherCAT interface
Non-contact, absolute position encoder
Automatic detection of dirt accumulation
Speed transfer

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Relaterte produkter
Spør produktsakkyndige

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Last ned komplett datablad som PDF:

Datablad utdrag: Tekniske data for WCS3B-LS710S

Produktbeskrivelse
Read head with EtherCAT interface

General specifications
Sampling rate		1.5 ms
Passage speed		≤ 12.5 m/s
Measuring length		max. 314.5 m
Free tolerances to code rail		horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Resolution		± 0.4 mm (1,250 positions/m)
Functional safety related parameters
MTTF_d		160 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED indication		Status indication Green: code rail detected, normal function Red: system error Flashing red: no code rail detected
LED ERROR		Error status (red) see manual for coding
LED RUN		Off: init Flashing (green): pre-operational Single flash (green): safe-operational On (green): operational
LED Link/Act		Port status (green)
Electrical specifications
Operating voltage		10 ... 30 V DC
Power consumption		6 W
Interface
Interface type		Ethernet ; 100 BASE-TX
Data output code		binary code
Protocol		EtherCAT®
Transfer rate		100 MBit/s
Output
Output velocity		switching output short-circuit protected
Switching voltage		Operating voltage
Load current		max. 25 mA
Standard conformity
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Approvals and certificates
CSA approval		cCSAus Certified, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		0 ... 60 °C (32 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Connection type		8-pin, M12 x 1 connector socket, Y-coded
Cable gland		Max. tightening torque of the cap nut: ≤ 0.4 Nm
Degree of protection		IP54
Material
	Housing	ABS , PC (Polycarbonate)
Mass		500 g
Dimensions
	Height	99 mm
	Width	90 mm
	Length	115 mm
General information
Ordering information		Mounting plate included with delivery

Classifications

System	Classcode
ECLASS 13.0	27270918
ECLASS 12.0	27270918
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 9.0	EC001852
ETIM 8.0	EC001852
ETIM 7.0	EC001852
ETIM 6.0	EC001852
ETIM 5.0	EC001852
UNSPSC 12.1	41111945

Details: WCS3B-LS710S

Product Documentation: WCS3B-LS710S

Manuals	Språk	Filtype	Filstørrelse
Manual WCS Electrical	ENG	PDF	11790 KB
Manual WCS Mechanical	ENG	PDF	12338 KB

Design / Simulation: WCS3B-LS710S

CAD	Språk	Filtype	Filstørrelse
CAD 3-D / CAD 3-D	ALL	STP	2923 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: WCS3B-LS710S

Certificates	Sertifikatnummer	Språk	Filtype	Filstørrelse
Canada USA CSA Ordinary Location	1007121	ALL	PDF	198 KB
Worldwide ETG EtherCAT Certificate of Conformity	199290-0055	ALL	PDF	250 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0909F	ALL	PDF	87 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6636A	ALL	PDF	84 KB

Software: WCS3B-LS710S

Device Description Files/Drivers	Frigivelsesinfo	Filtype	Filstørrelse
ESI-file for WCS3B-LS710x / ESI-Datei für WCS3B-LS710x	09/2021	ZIP	3 KB

Relaterte produkter: WCS3B-LS710S

Accessories

	WCS3B-PL2 Protective case
	Transparent protective case and seal for WCS3B readerfa

	WCS-MP1 WCS accessories
	Mounting plate for reading heads WCS2 and WCS3, Universal mounting plate for all reading heads WCS2... and WCS3...fa

	V45-GP Male connector, field-attachable
	Male connector RJ45 straight 4-pin, Cat5, shielded, field-attachable, insulation displacement connection, Outdoorfa

	V15S-W-ABG-PG9 Male connector, field-attachable
	Male connector M12 angled A-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V15S-G-ABG-PG9 Male connector, field-attachable
	Male connector M12 straight A-coded 5-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	V19SY-Y-V1D/V1S Y-Splitter
	Y-Splitter M12 plug 8-pin Y-coded to M12 socket 4-pin D-coded / M12 plug 4-pin A-codedfa

	V19SY-G-BK5M-PUR-ABG Cable connector, Ethernet
	Ethernet bus cable male cordset single-ended M12 straight Y-coded 8-pin, PUR cable black, Cat5e, shielded, drag chain suitablefa

Generelle merknader relatert til produktinformasjon fra Pepperl+Fuchs

Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
phone +47 3557 3800

Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.