Diagnostic Manager Software DTM-FC.AD*
- Software user interface for Advanced Diagnostic Modules
- Simultaneous access to all ADMs of a plant
- Embedded expert system gives pointed advice in clear text
- Includes Commissioning Wizard, data historian, oscilloscope...
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Automatic setup of diagnostic system
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for DTM-FC.AD*
| Produktbeskrivelse |
|---|
| User-Interface for Advanced Diagnostics, Professional Edition |
| Software | ||
|---|---|---|
| Hardware requirements | PC with 1 GHz processor and at least 512 MByte RAM | |
| Operating system | see release notes in the software package | |
| Languages | English | |
| Expert System | Built-in expert system interprets behavior of each segment based on rules and gives pointed information in clear text. Precisely diagnosis causes and suggests remedies, which are easy to understand. | |
| Physical Layer Diagnostics | Bulk power health, segment voltage and current, unbalance, noise, signal level, signal polarity, jitter | |
| Commissioning Wizard | Generates reports on physical layer and communications data per device or segment. Automates repetitive tasks during commissioning. | |
| Snapshot Explorer | User interface to review the history of Physical Layer Measurement Reports stored. | |
| History Data Export | Export of long-term history data to Excel and the file formats comma-separated (CSV) or binary for graphic analysis and diagram creation | |
| Segment Focus Mode | Fast update of detailed measurements for a single segment | |
| Integrated oscilloscope | Displays fieldbus signals in waveform giving greatest detail. To aid troubleshooting activities, even seldom occuring events can be captured using the oscilloscope's many selectable trigger functions. | |
| OPC Server Interface | The open OPC server interface can easily be adapted to any OPC client. It provides as a Data Access Server (Version 2.05) Summarized State information and basic diagnostic data such as the operating status of the diagnostic module and of the segments. | |
| Remote diagnostics | Fieldbus experts and maintenance contractors are enabled to review Physical Layer diagnostics from off-site. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242505 |
| ECLASS 12.0 | 27242502 |
| ECLASS 11.0 | 27242502 |
| ECLASS 10.0.1 | 27242502 |
| ECLASS 9.0 | 27242502 |
| ECLASS 8.0 | 27242502 |
| ECLASS 5.1 | 27242502 |
| ETIM 9.0 | EC000757 |
| ETIM 8.0 | EC001416 |
| ETIM 7.0 | EC001416 |
| ETIM 6.0 | EC001416 |
| ETIM 5.0 | EC000809 |
| UNSPSC 12.1 | 43232901 |
Details: DTM-FC.AD*
Function
The FieldConnex® Diagnostic Manager displays measurements of HD2-DM-A Advanced Diagnostic Modules (ADM). It commissions and configures the ADMs and receives data and alarms in realtime.
An Expert System learns values and characteristics of each segment and translates them into concise descriptions of causes in clear text. Maintenance or repair work can be scheduled proactively while the plant still operates. The Diagnostic Manager and ADM ensure best possible quality of the physical layer, higher plant availability and reduced troubleshooting effort.
Product Documentation: DTM-FC.AD*
| Product information | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM) | ENG | 2551 KB | |
| Brief Instructions | |||
| Quick Start Guide Diagnostic Manager | ENG | 1520 KB | |
| Manuals | |||
| Manual | ENG | 25397 KB | |
| Software Information | |||
| Release Notes - Diagnostic Gateway FF DTM | ENG | 284 KB | |
| End-user software license agreement (EULA) | ENG | 37 KB | |
Software: DTM-FC.AD*
| Software Tools | Frigivelsesinfo | Filtype | Filstørrelse |
|---|---|---|---|
| Diagnostic Gateway FF DTM / Diagnostic Gateway FF DTM | 2.2.3.3527 | ZIP | 65378 KB |
| Diagnostic Manager / Diagnostic Manager | 2.2.4.3610 | ZIP | 87499 KB |
| Pepperl+Fuchs Discovery and Configuration Tool (PFDCT) / Pepperl+Fuchs Discovery and Configuration Tool (PFDCT) | 2.4.0.412 | ZIP | 4773 KB |
Relaterte produkter: DTM-FC.AD*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.