AS-Interface gateway VBG-CCL-G4F
- Gateway according to AS-Interface specification 2.1 for up to 62 units
- AS-Interface connection via flat cable and EMS standard bottom section (included delivery)
- Degree of protection IP65
- Voltage supply from AS-Interface
- PLC functionality
- Error diagnostics via LEDs and LC display
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Last ned komplett datablad som PDF:
Datablad utdrag: Tekniske data for VBG-CCL-G4F
| Produktbeskrivelse |
|---|
| CC Link Gateway IP65 |
| General specifications | ||
|---|---|---|
| AS-Interface specification | V2.11 | |
| PLC-Functionality | integrated | |
| Diagnostics function | integrated | |
| Indicators/operating means | ||
| Display | LED display, 2 digits, for addressing and error messages | |
| LED SD | CC Link send data; LED green | |
| LED RD | CC Link receive data; LED green | |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green | |
| LED CONFIG ERR | configuration error; LED red | |
| LED PWR | voltage ON; LED green | |
| LED L RUN | CC link in operation; LED green | |
| LED L ERR | CC Link error; LED red | |
| LED PRG ENABLE | autom. programming; LED green | |
| LED PRG MODE | projecting mode active; LED yellow | |
| LED U AS-i | AS-Interface voltage; LED green | |
| Switch SET | Selection and setting of a slave address | |
| Button MODE | Mode selection/save configuration | |
| Electrical specifications | ||
| Insulation voltage | ≥ 500 V | |
| Rated operating voltage | from AS-Interface | |
| Rated operating current | ≤ 200 mA from AS-Interface | |
| Interface | ||
| Interface type | remote device, 3 occupied stations | |
| Protocol | according to CC-Link specification | |
| Transfer rate | 156 kBit/s up to 10 MBit/s | |
| Connection | ||
| AS-Interface | cable piercing technology | |
| CC Link | Cable gland M16 x 1.5 and cage spring terminals | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 62026-2:2013 | |
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| AS-Interface | EN 62026-2:2013 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Material | ||
| Housing | PA 6 GF30 | |
| Mass | 355 g | |
| Construction type | Plastic housing with cable gland | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242607 |
| ECLASS 12.0 | 27242607 |
| ECLASS 11.0 | 27242607 |
| ECLASS 10.0.1 | 27242607 |
| ECLASS 9.0 | 27242607 |
| ECLASS 8.0 | 27242607 |
| ECLASS 5.1 | 27242607 |
| ETIM 9.0 | EC001603 |
| ETIM 8.0 | EC001603 |
| ETIM 7.0 | EC001603 |
| ETIM 6.0 | EC001603 |
| ETIM 5.0 | EC001603 |
| UNSPSC 12.1 | 39121535 |
Details: VBG-CCL-G4F
Function
The VBG-CCL-G4F is a complete CC-Link master for use in the field (IP65). The gateway's G4 field housing has the same advantages as the serial master in this design.
Two buttons are used for address assignment of the AS-Interface slaves and acceptance of the desired configuration. In configuration mode, all detected AS-Interface slaves are displayed on the 2-digit LCD. In normal operation, the LCD is blank unless the master detects a faulty AS-Interface slave. The LEDs, located on the front panel, show the current status of the AS-i line.
PLC Functionality
The VBG-CCL-G4F provides 16 kBytes of program memory, 8 kBytes of main memory, 1024 counters and 1024 timers for PLC functionality. These capacities suffice to process the data on the AS-Interface. Thus the master can also be operated in "stand-alone" mode. The program processing time is 2 ms per 1000 word commands. The programming language is based on the STEP5 programming language. The AS-Interface CTRL functions (upload, download, start, stop, read or write internal memory) are available in expanded mode.
Product Documentation: VBG-CCL-G4F
| Manuals | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| Manual VBG-CCL-G4F | ENG | 420 KB |
Design / Simulation: VBG-CCL-G4F
| CAD | Språk | Filtype | Filstørrelse |
|---|---|---|---|
| 3-D model / 3-D-Modell | ALL | STP | 223 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VBG-CCL-G4F
| Declaration of Conformity | Sertifikatnummer | Språk | Filtype | Filstørrelse |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2449C | ALL | 109 KB |
Relaterte produkter: VBG-CCL-G4F
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Dette gratis PDF-dokumentet sammenligner de forskjellige TCP-baserte kommunikasjonsprotokollene (AMQP, OPC UA, MQTT, REST API) som har funnet veien opp og regnes som muliggjørerne for IIoT og Industry 4.0. Last ned gratis nå!
Pepperl+Fuchs AS
Frednesøya 21
3933 Porsgrunn
Norway
info@no.pepperl-fuchs.com
+47 3557 3800
Pepperl+Fuchs er en ledende leverandør innen utvikling og produksjon av produkter til det globale automasjonsmarkedet. Kontinuerlig innovasjon, høy kvalitet og kontinuerlig vekst danner grunnlaget for vår kontinuerlige suksess i mer enn 70 år. Pepperl+Fuchs-konsernet har i dag mer enn 6300 ansatte globalt. Produksjonen er basert på ISO 9001 og finner sted i Tyskland, USA, Singapore, Ungarn, Indonesia og Ungarn.